Search:

Type: Posts; User: Toxic

Page 1 of 18 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    6
    Views
    205

    Re: Konica Minolta C224 - freezing

    You could try just in case "clear all data", propably wont solve problem but you have nothing to lose.
  2. Replies
    3
    Views
    127

    Re: C6500 Exit Section Causing Smudging?

    Had similar problem few times.
    It mostly occur when thick paper is too stiff.
    Try this settings

    49451
  3. Replies
    3
    Views
    150

    Re: Help Plz with 3105 error

    Never done that but i think you can use some air to blow dust when remove fusing unit.

    PS:do not spam private messages with same questions.

    49409
  4. Replies
    5
    Views
    257

    [Misc] Re: C3070l wrinkling output paper

    Agreed, try lowering fusing temperature.
    For years on all machines that 115g paper was nightmare to work with, especialy when output is full black or duplex.
    It just wrinkle when get heat in fuser,...
  5. [CQ] Re: Konica Bizhub Pro 6500 (IKON CPP-650) Color Reg Off Cyan

    If i am not wrong i can see repetition in that cyan pattern.

    Check this


    ・Approx 188mm pitch: Damage on the drum surface.
    ・Approx 251mm pitch: Damage on the fusing belt
    ・Approx 53mm pitch:...
  6. Re: Develop ineo+227 (Konica ) error code c-2152

    Check wirings for maybe some pinched wires or damaged insulation.
  7. Replies
    12
    Views
    593

    Re: Bizhub 224e Fuser

    We should open poll here to find out is it different fusers or not... :D
  8. Replies
    5
    Views
    239

    Re: bizhub 420, duplex problem

    Whenever i have this problem on 420/500 it was always grease inside duplex clutches.
    KM long time ago release TAD about this problem.
    Cleaning clutches solve problem for some time but replacing...
  9. Replies
    12
    Views
    593

    Re: Bizhub 224e Fuser

    In my country it is about 10% cheaper for C224e.
  10. Replies
    12
    Views
    593

    Re: Bizhub 224e Fuser

    I think it is the same thing just different PN.
    Once in hurry situation i put fuser from 368e on C224e and it works ok so it would be logical to can fit also from 224e to C224e.
  11. Thread: IU210 and IU310

    by Toxic
    Replies
    1
    Views
    136

    Re: IU210 and IU310

    You mean IU311, IU310 is for C350 not C352?
    I cant remember exactly what is difference but i can remember that we easily put IU311 into C252 just because IU311 have charging unit cleaner on all...
  12. Replies
    14
    Views
    682

    Re: Bizhub 454e - need 2nd opinion

    This is recently problem on C258, laser could cause different error patterns.
    Top part of image is after laser cleaning and bottom is before cleaning.
    My customer describe it like paper is...
  13. Replies
    14
    Views
    682

    Re: Bizhub 454e - need 2nd opinion

    4e series have some problems with fine dust coming into laser unit and stick to poligon mirrors but in that case ussualy density should be lower on the paper far side.
    If you already check...
  14. Replies
    8
    Views
    240

    Re: C3100p Wireless printing

    You can use any router or access point with client mode function.
    Set router to connect to your main wifi router and plug lan cable from router to C3100p.
  15. Replies
    22
    Views
    1,384

    Re: Konica pro 1100 c-2802 low density

    Could this be your problem from start?
    Nowadays OEM toner too could cause problem and make difficult to figure out what is problem with some strange errors...
    49137
  16. Thread: Knova site

    by Toxic
    Replies
    15
    Views
    824

    Re: Knova site

    I also tried "C224e SAL" but nothing come up.
  17. Replies
    3
    Views
    248

    Re: Konica Minolta C3110 toner vs C3100p toner

    Agreed, tried once and it works.
  18. Replies
    4
    Views
    395

    Re: Bizhub C280 fuser belt

    Provide some more details...
    Machine counter, parts consumable lifes...
    On what media problem occurs?
    Did you make appropriate settings for paper weight in printer driver?
    Photo sample could be...
  19. Replies
    5
    Views
    282

    Re: Red line on edges of paper

    Agreed, that drum must be very bad (high part life)
    Replace it very soon or it will be deplete developer and possibly damage developing unit roller if you let it run for some time.
    If all drums are...
  20. Replies
    18
    Views
    569

    Re: Bizhub c360 black quality issue

    Image unit you mean drum unit ?
    OEM drums or compatible and did you replace all or just specific color?
    What color developing unit replaced?
    If i see good you have problem with black color mostly?...
  21. Replies
    1
    Views
    222

    Re: [Dead] NVRAM reset tool for Bizhub C364

    For what purpose you need this fw?
  22. Replies
    14
    Views
    531

    Re: 4/4e series paper size on tray

    Few years ago i sold them C227 and take that C224e (count as few hundred $), soldered few broken wires of paper sensors and lease that machine, still going strong.
    Ofcourse i show them how to copy...
  23. Replies
    14
    Views
    531

    Re: 4/4e series paper size on tray

    Probably because most users use tray 1 more often.
    I have only 1 case and it happened because user do very much id card copy but they copy one side then put back paper to tray 1 and copy 2nd id card...
  24. Replies
    3
    Views
    207

    Re: biz 361 paper jam

    Just replace adu clutches, so common problem on this series.
  25. Re: what models from 4 series correspond to minolta c452

    If you are not very expirienced with bizhubs i would not advice you to go to that adventure you planed.
    You may spent lot of money with no result.
    Way better solution is to order original parts, i...
Results 1 to 25 of 431
Page 1 of 18 1 2 3 4