Search:

Type: Posts; User: scanmc

Page 1 of 5 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    4
    Views
    150

    Re: PKG-675i Printhead error

    Check your PM
  2. Replies
    2
    Views
    332

    Re: MFX-C3090 Drum Unit

    You may need to take off the front face plate from the Muratec drum and switch it to the KM brand drum. I believe they are notched differently
  3. Replies
    17
    Views
    831

    [Jamming] Re: Bizhub 25e keeps jamming documents

    I'm going to say its the ADF lid that is bad. There is a weak plastic loop on the upper feed assembly lock down hooks on the rear side that breaks therefore not holding the lid down while feeding. If...
  4. Replies
    28
    Views
    1,839

    Re: Compatible Toner

    Back in the early 80's I would pickup probably a 1,000 bottles 3.2 oz dry magnetic toner along with several bottles of toner & developer to make pm kits for the sharp 726 & 740 series machines at the...
  5. Replies
    0
    Views
    287

    [For Sale] Okidata Pro 900/Pro 510 Supplies

    I have 2 new complete sets of toners & 1 complete set of drums.

    Make me a reasonable offer if interested.

    Thanks
  6. Replies
    2
    Views
    336

    Re: Okidata C911 and B432

    Check your PM
  7. Re: What type of pico fuse do I need to reset Okidata color transfer belts

    I would also drill a hole in the waste container and vacuum it out. If not eventually it will back up and cause other issues
  8. Re: What type of pico fuse do I need to reset Okidata color transfer belts

    I bet it is probably the same as the C9600/9800 series type of fuse. Oki really hasn't changed their engine technology in quite a while. I Googled it and had a couple of places selling those.
    I...
  9. Re: Konica Minolta bizhub 25E. SD card replacement

    What files did you put on the SD card? The firmware is loaded though the usb port on the side of the display. If you have the firmware you need to unzip then drop the boot file on the root of the...
  10. Re: Konica Minolta bizhub 25E. SD card replacement

    I use one of those little thumb drives that has multiple slots in it for different size cards. Possibly from someone that has access to the KM files can email them to you. And yes nothing special...
  11. Re: Konica Minolta bizhub 25E. SD card replacement

    He will also need to load the files on the SD card. Not the firmware but the actual files for the card
  12. Re: bizhub 350 with df-605 "jamming" but you open the cover and close it and jam clea

    You said that you could scan 20 pages and the last one exiting it would show jam? if this is the case I would make sure the exit flag on adf isn't hanging up on the last page that is exiting
  13. Replies
    2
    Views
    619

    Re: HP Laserjet 600 M601 swing plate

    if you've done a 4345 this is much easier. The only thing I hate is removing that plate above the transport section to get to the one screw on the swing plate. Have a little stubby screw driver in...
  14. Thread: SINDOH

    by scanmc
    Replies
    3
    Views
    735

    Re: SINDOH

    I bought a few from a distributor here in the states for the A3 product. Yes same as the Konica line with the exception of the toner is keyed differently. Never bought any of the small A4 stuff.
    ...
  15. Thread: Okidata 5502

    by scanmc
    Replies
    3
    Views
    555

    Re: Okidata 5502

    I've had the same issue on a few of these units. Change out the feeder registration unit #45377801 should cure your problem
  16. Replies
    9
    Views
    698

    Re: Samsung 6332 dn smtp send error

    If I recall the SCX6332 is a pretty old machine and may not be able to support gmail
  17. Re: Are Ohio/Indiana copier businesses employees still going to work?

    Being in IL we also have this law as of Saturday at 5 PM We do have some government & medical agencies still open. The way I take it if you supply products to your customer even if your customer is...
  18. Replies
    0
    Views
    276

    Samsung CLX9250/9350 series fuser

    Looking for a good used CLX9250/9350 series fuser. Please PM me if you have one of these laying around.

    Thanks,
  19. Replies
    3
    Views
    1,567

    Re: Konica Pagepro 4650 Toner missing

    It's under under a round cover I believe on the right side the cartridge. The only way to reset it as far as I know would be to replace
  20. Replies
    3
    Views
    1,567

    Re: Konica Pagepro 4650 Toner missing

    Are you using OEM toner? These cartridges have a chip on them and if you're using a compatible maybe this is the issue. Not sure but just throwing it out there.
  21. Replies
    9
    Views
    2,484

    [CQ] Re: OKI B721 Blank prints?

    No it doesn't throw an error code. That Led head is very easy to knock out of place as its kept in place by two springs. People have a tendency to slam the the lid and if that LED head isn't lined up...
  22. Replies
    9
    Views
    2,484

    [CQ] Re: OKI B721 Blank prints?

    Make sure the LED head is not out of place. I've seen more than once where the customer has knocked it up so its not pointing at the the drum unit while pulling out the drum & toner unit
  23. Replies
    4
    Views
    7,576

    Re: MFX-3530 Toner low

    I'll check when I get back in the office
  24. Replies
    4
    Views
    7,576

    Re: MFX-3530 Toner low

    I just sent you a PM
  25. Replies
    10
    Views
    3,163

    Re: MJ-1101 finisher

    I decided to give it the old college try one more time not to mention my stubbornness. After removing the covers to be able to get the elevator sensors such as BC and MC recommended low and behold...
Results 1 to 25 of 114
Page 1 of 5 1 2 3 4