Search:

Type: Posts; User: copier tech

Page 1 of 20 1 2 3 4

Search: Search took 0.28 seconds.

  1. Re: kyocera taskalfa 300ci WELCOME message

    Its good practice to update the firmware first before replacing board etc.
  2. Replies
    13
    Views
    231

    Re: Double Image in Copies

    This could be the cause.

    99% of colour registration issues on Canon are caused by the ITB/Transfer unit.

    Remove the belt from the ITB thoroughly clean the rubber drive roller & the inside of...
  3. [Jamming] Re: TA-2552ci-3253ci Induction scooters are worn very quickly

    What type/weight of media is the customer using?

    Cheap recycled paper can cause the rollers to wear out prematurely.
  4. Replies
    2
    Views
    72

    Re: Error E000355

    This error occurs when you try & reset the main counter by swapping boards in the wrong order.

    Fit all the original boards back.
  5. Replies
    9
    Views
    5,928

    Re: MP C4503 SC569

    I agree with this, for a quick & simple fix spray some WD40 on this one way clutch, you can open the right hand door to access this on the rear of the machine to the right of the fuser.

    If this...
  6. Replies
    13
    Views
    231

    Re: Double Image in Copies

    Did you replace the ITB unit with a new or used one?

    If as suggested doesnt work try a DC-CON clear.
  7. Replies
    10
    Views
    327

    [Error Code] Re: J001 Paper feed jam

    ^Have you tried this ^
  8. Re: Ricoh Aficio MP C2551AD Network Scan To Folder

    I agree as slim says I still have a few of these old models about & have needed to update the firmware on a few for users that insist on scanning via SMB.

    Usually happens after customer updates to...
  9. Replies
    2
    Views
    167

    [Error Code] Re: BH C454e C-D385 error

    Tried to above from service manual.

    Replaced SSD & HDD same issue.
  10. Replies
    25
    Views
    2,904

    Re: Bizhub C220 firmware update

    FYI, you’re paying for my time to download the firmware AND service manual then zip the files upload to a site & then share the link.
  11. Replies
    25
    Views
    2,904

    Re: Bizhub C220 firmware update

    Thanks Phil, happy to help.


    We have a ‘Buy now’ button on the website.
  12. Re: konica minolta bizhub c 287 transfer belt question

    Unfortunately this was thrown away as the fault is intermittent it was initially ok after replacing the belt.
  13. Replies
    43
    Views
    1,275

    Re: I need to NVRAM reset tool bizhub C280

    Follow the installation process for the C224e similar to the C280.

    43984
  14. Re: konica minolta bizhub c 287 transfer belt question

    Old thread I know but having the same issue.

    After fitting a new transfer unit i'm getting an intermittent clicking sound & misregistration.

    What was the solution for your issue?
  15. Replies
    43
    Views
    1,275

    Re: I need to NVRAM reset tool bizhub C280

    This is not a C280.
  16. Replies
    43
    Views
    1,275

    Re: I need to NVRAM reset tool bizhub C280

    Press counter, check details stop,0,0,stop,0,1
  17. Replies
    43
    Views
    1,275

    Re: I need to NVRAM reset tool bizhub C280

    I'd suggest page 1.....................
  18. Thread: SP C231SF

    by copier tech
    Replies
    8
    Views
    375

    Re: SP C231SF

    These are cheap Mickey Mouse copiers and this is normal but try updating the firmware
  19. Replies
    43
    Views
    1,275

    Re: I need to NVRAM reset tool bizhub C280

    Follow this guide.

    43975
  20. Replies
    43
    Views
    1,275

    Re: I need to NVRAM reset tool bizhub C280

    Follow the set up procedure to the letter.
  21. Replies
    43
    Views
    1,275

    Re: I need to NVRAM reset tool bizhub C280

    You must have missed a step.

    Post a print sample.
  22. Replies
    11
    Views
    1,008

    Re: Ricoh MP301, cant connect

    I had the same issue with a 301 installed the driver but when plugging in via USB Windows doesnt see or install the printer.

    I wondered if USB printing was an optional extra!?
  23. Replies
    8
    Views
    248

    Re: Bizhub c353 scan to folder on mac ?

    Out of interest why do you guys still support these old boxes? in the UK parts have been discontinued don't waste your time.

    MAC don't support SMB or FTP anymore.
  24. Replies
    2
    Views
    167

    [Error Code] BH C454e C-D385 error

    Hi all,

    After a routine service & updating the firmware the machine throws D385 so after choosing 'recover data' it just sits doing nothing for hours.

    This error is not listed in the service...
  25. Re: Bizhub C552 - SMB version upgrade? firmware?

    Scan to email, we use a gmail account as do many other owners of these old boxes.

    Or if the client must have SMB use a NAS drive.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4