Search:

Type: Posts; User: mga

Page 1 of 16 1 2 3 4

Search: Search took 0.24 seconds.

  1. Replies
    18
    Views
    419

    Re: c3002 "add toner" new developerbox

    If it saying loading toner then replace it will be the pump if it says not toner it would be toner end dection sensor but only on cym no sensor on bk.

    Also check see if dev clutch is turning pull...
  2. Thread: SP 4510 Drum Unit

    by mga
    Replies
    3
    Views
    137

    [Misc] Re: SP 4510 Drum Unit

    Best to only use oem toner and drums they quite cheap toner high capacity is 12k drums are 20k

    But katun in the UK is one of the best compatible ones out there
  3. Thread: SC 899

    by mga
    Replies
    7
    Views
    190

    [Error Code] Re: SC 899

    Correct +1 also delete job on pc as could be corrupted
  4. Replies
    4
    Views
    160

    Re: MP4000 toner consumption status reset

    There no chip in the mp4000 Mono range probably old centre cap still in hopper
  5. Replies
    11
    Views
    428

    [Misc] Re: MPC 3003 scanner section bend

    I find if scanner frame is bent or twisted best to forget about it and charge customer
  6. Replies
    5
    Views
    246

    Re: Canon IR C5045 cannot print anymore

    Is there a error on the Fiery ie not 00
  7. Replies
    11
    Views
    494

    Re: C284e washes out colors

    Why do they call it a print head in the user guide it a laser
  8. Replies
    2
    Views
    192

    Re: Ricoh mpc2800 lcd display

    Hi Mark I could probably help I will have a look tomorrow it would be good used I will get back to you
  9. Replies
    11
    Views
    494

    Re: C284e washes out colors

    ? Print head
  10. Replies
    11
    Views
    494

    Re: C284e washes out colors

    Did you use drum kit or new oem drum was it a new dev assy
  11. Re: gear code for cleaning unit transtert belt 2551 ci?????

    Sometimes we have to replace parts transfer unit with includes cleaning assy will need replacing but they have modified the waste assy best to replace
  12. Replies
    12
    Views
    279

    [Error Code] Re: E000246-002 Error - C5035i IR Advance

    Correct different part number put the machine with correct boards and call out a trained service engineer
  13. Replies
    7
    Views
    167

    [Dead] Re: Please..tt (ir adv 8295 error e350-0001 )

    I think by looking at your profile you may be better of calling out a trained service engineer you could end up doing more damage good luck
  14. Replies
    18
    Views
    419

    Re: c3002 "add toner" new developerbox

    The pumps do give loading toner on mpc3002 series same as all with that pump design
  15. Thread: MPC3003 SC995-01

    by mga
    Replies
    11
    Views
    2,005

    Re: MPC3003 SC995-01

    This is old thread 143 is factory service mode
  16. Replies
    16
    Views
    293

    [Misc] Re: Hard Disc Drive not formatting in Ricoh MP2550

    Try formatting in service mode

    Edit
    Sorry I see you have tried that

    Try section by section not format all
  17. Replies
    10
    Views
    437

    Re: MPC3003 only waiting display . .

    I would put all the original boards back on including the correct eprom on the bicu and nvram. Then just replace new hdd
  18. Re: Canon vs. Kyocera - 35/40ppm color - Does Kyo come close?

    New Kyocera range is very nice great parts life and very good copy quality has new smart panel.
    The Canon just a newer 52xx series parts don't last as long out the two Kyocera for me
  19. Replies
    12
    Views
    385

    Re: MPC2503 slightly red glow . . .

    Have you any pdf samples
  20. Replies
    3
    Views
    173

    Re: Toshiba 5055C Service Menu

    No other way apart from above reboot when holding keys
  21. Replies
    5
    Views
    434

    [Error Code] Re: error code E020-02A9 on C5550i II

    Well done
  22. Replies
    14
    Views
    416

    Re: More Detailed Lines/streaks problem

    Basic copy quality problem check pm life replace with only oem parts not cheap China parts they don't work
  23. Re: Broken Glass Screen of Control Panel Unit IR 4545

    Top screen is included with the top white cover if the lcd under the top screen looks damaged you may be ok as the lcd is the expensive part. But the only way to know is to remove top panel
  24. Replies
    3
    Views
    183

    Re: Toner Compatibility IM C2000

    Best to fit the correct toner if you use compatible mpc2503 2003 2004 2504 not IMC range tell your supplier you want the correct toner
  25. Replies
    12
    Views
    385

    Re: MPC2503 slightly red glow . . .

    Was they new oem parts rear plastic plate near dev gear needs to be on
Results 1 to 25 of 382
Page 1 of 16 1 2 3 4