Search:

Type: Posts; User: SeniorTch

Page 1 of 4 1 2 3 4

Search: Search took 0.08 seconds.

  1. Replies
    7
    Views
    1,267

    Re: Xerox color press 770 fiery software

    Hi Mr, saga 710
    I need this SW also I will send you a PM
  2. [Misc] 770 with message output tray not installed. not print.

    How to configure a xerox 770 machine to work with OCT tray. The finisher is temporarily out of service, the fiery server gives me an "output tray not installed" message and sends the jobs as...
  3. Re: Xerox C560 Missing Cyan after customer did a NVM factory Reset

    check the UR bias contact. sometimes the spring lost the contact with the UR Bias Lead
  4. Replies
    3
    Views
    200

    [Misc] Re: dc242 scan port inactive no blinks

    Thanks to Xcopitech and Tecnico_Xerox. the cause of the problem was the crossover cable,
  5. Replies
    4
    Views
    260

    [Jamming] Re: Xerox DC 770 - Paper jam from all trays

    Hello , Sometimes the gear of the transport motor of the registration drive is broken and displaced. see picture45391 Good luck !!
  6. Replies
    3
    Views
    200

    [Misc] dc242 scan port inactive no blinks

    Hi Tigers
    I have DC242 with a fiery ERB server. the Scan port of the IOT is inactive.
    (does not blink).I can not find how to activate this port.
    Actions taken: scan cable replaced,ESS PWB...
  7. Replies
    9
    Views
    969

    Re: Firmware for C364e A5C10Y0-F000-G20-M1

    Hi gays you can help me with this firmware I need
  8. Thread: Xerox D110

    by SeniorTch
    Replies
    6
    Views
    1,481

    Re: Xerox D110

    I am confused. why you lost data or software key information when you replaced the BP Board. This is only a connector ...as a rise board.
  9. [Error Code] Re: FreeFlow (on 700) C16-352: System Error w/ Printer Initializing persisting

    You need a new license. The system will not recognize the current one because it has expired. Even if you return the date. Before applying for the license, set the date to the actual date.
  10. [Error Code] Re: FreeFlow (on 700) C16-352: System Error w/ Printer Initializing persisting

    when is the date of license expiration and what is the date on server now.
  11. Replies
    8
    Views
    1,516

    [Misc] Re: Magenta background

    seems to be a voltage problem. a charge roller voltage or a Dev housing Bias.


    105E17680

    Charge (Y, M, C) HVPS
    or
  12. [Error Code] Re: FreeFlow (on 700) C16-352: System Error w/ Printer Initializing persisting

    not the BIOS date but the system date.
    In this BIOS Page there is only one 160GB HDD. But what I Know this server have two 250GB HDD. one for the operating system and aplications (solaris and...
  13. [Error Code] Re: FreeFlow (on 700) C16-352: System Error w/ Printer Initializing persisting

    Hi
    did you set the date in BIOS when you changed the battery
  14. Replies
    3
    Views
    382

    [Dead] Re: BP2 Integrated fiery serverSW for 700i

    Thanks InterfaceP.
    My email is
    mdcopierx@gmail.com
  15. Replies
    17
    Views
    1,901

    Re: Error code 042-326

    Try to reset NVM loc 741-132 to 0.
  16. Replies
    3
    Views
    382

    [Dead] BP2 Integrated fiery serverSW for 700i

    Hi to All:
    do anybody has the sys disk SW to reload a BP2 XXXXXX Fiery integrated server for a 700i. (the .iso file to load by an USB.)

    Thanks to all.........
    Francisco
  17. Thread: Xerox c560

    by SeniorTch
    Replies
    2
    Views
    506

    Re: Xerox c560

    I had a case of aI C60 black dispenser with the same problem. 2 times replaced the toner cartridge motor and the dispenser motor.
    Empty the contents of the dispenser. worked a while, the next day...
  18. [Misc] Re: WC 7655 head scratcher... makes no sense.

    Try reloading the NC SW .If this do not works, reseat / clean contacts or replace the firewire cards and cable between NC controller and CCM controller
  19. Replies
    3
    Views
    704

    Re: Xerox dc 550 no powering up

    there is some sound, image in the UI, some led or flashing led. remove the back cover and see if there is any led on the MCU, ESS PWB

    Go to Other Faults and follow the OF 1.1 Power On Rap
  20. Replies
    4
    Views
    1,013

    [Jamming] Re: Xerox Dc 260 error code 077-109

    Have you tried to send the print as plain paper not as label stock
  21. Replies
    12
    Views
    1,084

    Re: Print Face Up Xerox 4112

    Have you tried This ?
    42278
  22. Re: Docucolor 260 colors are way off - Calibration ?

    This does not seem to be a problem of polarization rather a problem of distribution of the revealing material to form the magnetic brush.
    check the yellow magnetic brush if it is even. If it is not,...
  23. Replies
    5
    Views
    716

    [Jamming] Re: Xerox C60/C70 Printed Color error

    low level of magenta developer material in magenta developer housing.. remove the top cover of developer housing . If you can see much of the auger, then the level of developer material is too low....
  24. Replies
    3
    Views
    1,228

    [Error Code] Re: Xerox 700 DCP fault 061-327

    If you have not serviced the ROS and flat cables before the fault, could be an scracth on the surface of any drum.
  25. Replies
    9
    Views
    927

    Re: Xerox Color C60 face up/face down

    Totally agree with Mr. Jhalfhide. just be sure to select more than 250gsm for heavyweight stock.
Results 1 to 25 of 87
Page 1 of 4 1 2 3 4