Search:

Type: Posts; User: orestesp

Page 1 of 5 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    7
    Views
    184

    Re: Sponge Gathering Rollers

    Yes it is (SR970/MP6000).

    The foam rollers had completely disintegrated and needed replacement as the main tray won't work without them. The newer ones were causing the binding but I have now...
  2. Replies
    7
    Views
    184

    Re: Sponge Gathering Rollers

    I see what you guys mean. The trouble it was giving me initially is that the motor that operates the exit rollers would stall once paper arrived.

    I fixed this by doing what I described earlier,...
  3. Replies
    7
    Views
    184

    Sponge Gathering Rollers

    Hello,

    I recently had to replace the sponge gathering rollers on the finisher of my machine. I opted to not go with the original parts, as from my experience I know that these foam rollers are...
  4. Replies
    1
    Views
    174

    Copier Wholesalers in Europe

    Hello,

    I have come across a couple of companies that are basically a huge warehouse filled to the brim with copiers, ranging from office grade copiers to production presses.

    From what I...
  5. Replies
    20
    Views
    852

    Re: Waste Toner Disposal

    Look, I just wanted to know if there was a better alternative to what I was already doing. I emailed Konica Minolta through the page that they have for recycling these things, if they reply, I'll let...
  6. Replies
    20
    Views
    852

    Re: Waste Toner Disposal

    It's not "bad" as in something that will harm someone's health if exposed to it, but throwing these tiny styrene acrylic particles in the household recycling bin isn't a great idea either,...
  7. Replies
    20
    Views
    852

    Re: Waste Toner Disposal

    I do not have a contract with through KM or one of its dealers, but I do buy parts from a KM dealer but like I said I asked and they didn't really know. The website that you've linked to is for the...
  8. Replies
    20
    Views
    852

    Re: Waste Toner Disposal

    I am not a dealer, I own a print shop. I just replaced the cyan developer and I was wondering if there was anything like that in my country/in Europe. I was not aware of this program, thank you for...
  9. Replies
    20
    Views
    852

    Waste Toner Disposal

    As the title suggests, where do you dispose of waste toner/developer from e.g. a developer change? The company that I purchase my parts from doesn't have a collection program and I can't find any...
  10. Replies
    0
    Views
    63

    [Wanted] Colortrac SmartLF Ci 40 Mainboard

    As the title says. PM me if you have one and want to sell it, maybe we can work something out :)
  11. Replies
    15
    Views
    456

    [Misc] Re: C6500 Y Tonner Hopper Issue

    I am afraid most of the Y developer is sitting in the waste toner box. This is what the Y developing unit looks like right now. I don't think the developer can recover after this, can it? After all,...
  12. Replies
    15
    Views
    456

    [Misc] Re: C6500 Y Tonner Hopper Issue

    Hello again,

    I checked the TCR value today, Y was at 80 (!), I ran a few copies of test pattern #53 to de tone it at 255. I left it at ~120. While I had the toner supply unit door open, I could...
  13. Replies
    15
    Views
    456

    [Misc] Re: C6500 Y Tonner Hopper Issue

    Yes the bottle rotates, I checked. Also I can hear the bottles spinning/the machine asking for toner when I open/close the door after the "Add Y toner" message appears. Toner does fall from the port...
  14. Replies
    15
    Views
    456

    [Misc] Re: C6500 Y Tonner Hopper Issue

    The only relevant documentation I can find is this. But I don't think I have ran that low coverage on Y for so many pages and it doesn't really look exactly the same (I think).
  15. Replies
    15
    Views
    456

    [Misc] Re: C6500 Y Tonner Hopper Issue

    The machine inside is relatively clean, I don't have a toner misting problem.

    What I can't figure out is what causes the the "Add Y Toner" message to appear often while the toner bottle has toner...
  16. Replies
    15
    Views
    456

    [Misc] Re: C6500 Y Tonner Hopper Issue

    What is contaminating the developer? I replaced it in late December last year because of this. Why would it re appear?

    What do you suggest I should do?

    As for the e-ring that you mention, do...
  17. Replies
    15
    Views
    456

    [Misc] Re: C6500 Y Tonner Hopper Issue

    Hi, thank you for replying.

    Machine doesn't code. It just asks for a new yellow toner bottle while in fact the bottle has toner in it (and not a little but a lot of it). I suspect this has to do...
  18. Replies
    15
    Views
    456

    [Misc] C6500 Y Tonner Hopper Issue

    Hello,

    I am faced with the following problem: My machine thinks that it ran out of Y toner while in fact the toner bottle isn't empty. I have verified that the toner bottle motor is spinning...
  19. Re: C6500 Gamma Sensor & Max Density Sensor Readings

    Hi,

    Here are the readings from my machine. Hope this helps.

    Max. Density sensor: 119

    Gamma sensor output:

    Gamma color: 119
    Gamma black: 120
  20. Re: MP6000 SC551 + General Maintenance after a period of inactivity

    Hi again,

    I will be replacing the developer - it seems that the PM counters had been reset without actually replacing the parts. After a couple of thousand of prints (~5k) the machine is full with...
  21. Replies
    17
    Views
    701

    Re: LU-202: Replacing the Lift Wires

    Hello,

    Unfortunately, I already run all of my jobs face up - mainly because I need to monitor the output of the engine and because I recently discovered that my decurling roller is shot (I need to...
  22. Replies
    17
    Views
    701

    Re: LU-202: Replacing the Lift Wires

    That's a bummer. Just out of curiosity: Why is this tray so sensitive to this while the bypass tray doesn't seem to care at all?
  23. Replies
    17
    Views
    701

    Re: LU-202: Replacing the Lift Wires

    Hello everyone,

    I have so far fed a couple of thousands of sheets of both uncoated and coated stock of varying weights with great success using this unit.

    However, for some reason unbeknownst...
  24. [Misc] Re: MP7502sp and 6001sp - large white line problem

    Hi Gigi,

    Unfortunately I don't have a solution to your problem, but I hope this saves you from future trouble.

    I have set all of the computers that work is being done on in my shop to get the...
  25. Re: MP6000 SC551 + General Maintenance after a period of inactivity

    I use FTP for scanning, so if there aren't any improvements on the copying or printing side of things, I won't risk it. I just saw a few threads that mentioned that a FW update could help alleviate...
Results 1 to 25 of 112
Page 1 of 5 1 2 3 4