Search:

Type: Posts; User: JR Skewing

Search: Search took 0.01 seconds.

  1. Bozo customer

    The prior post reminded me of a customer a few years back.
    They had a Sharp Z835 / Xerox XD100.
    My contact told me "The toner in this clear container was almost empty, so I refilled it."
    I...
  2. Replies
    2
    Views
    304

    Re: Brother MFC-L8850 Will not power up

    Actually, the machine WAS off in the beginning; the goal was to make it power up.
    ...Lorenzo
  3. Replies
    2
    Views
    304

    Brother MFC-L8850 Will not power up

    My client has a Brother MFC-L8850 that will not power up.
    After desoldering and checking the two fuses on the power supply, I went creative.
    Here are the two paths to resolving the problem:
    --...
  4. Why don't you bring us a new one?

    While deep in a T/S or repair a dimwit asks "Why don't you just bring us a new one?"
    My response: "Excellent idea! Do you have a PO number, or can I use your name on the requisition?"
    They mumble,...
  5. Replies
    3
    Views
    244

    [CQ] Konica-Minolta BH c454 Repeating Marks

    My client has a Kon-Min BH c454 with marks repeating at a 156mm interval.
    I determined this exact symptom after cleaning the fuser upper/lower pickers and replacing the xfer cleaning blade, which...
  6. Wanted: Sharp AR-M237 Paper Delivery Exit Assembly - OR - Delivery Roller Holder

    I have a client with a Sharp AR-M237 that needs a replacement for a crumbling -

    Paper Delivery Exit Assy:
    CFRM-0038RS99
    CFRM-0038RS98
    CFRM-0038RS69
    CFRM-0038RS58
    CFRM-0038RS57

    - OR -
  7. [CQ] Xrocks WorkCentre 7225 Low Density (Colors)

    This Xbox WC 7225 developed low color density, both with copies and prints.
    I grilled the client about the onset (sudden? slow?) and was unable to obtain actionable info.
    Solids and tone screens...
  8. Replies
    7
    Views
    1,267

    Noob here. Not noob in the field.

    Started in 1973 w/ 3M (Thermofax!), one year after Jim Intravia.
    The only things that have remained the same:
    Paper
    Electricity
    People
    Back in '73 all the steam-powered equipment had been...
  9. Replies
    3
    Views
    513

    DP-770 on CS2551ci Unresponsive

    My client has a CS2551ci with a DP-770 that won't run. The 'Doc Loaded' LED remains off.
    Using Sim U244 the ADF sensors check OK (I wasn't able to check: Timing - Tray - Lift U-Limit - Lift...
  10. Replies
    0
    Views
    145

    [Dead] DP-770 on CS2551ci Unresponsive

    This CS2551ci has a DP-770 that is unresponsive. The 'Doc Loaded' LED remains off.
    In Sim U244, Feed - Regis - Set - Longitudinal - Cover Open - Open - Eject
    all change state properly when...
Results 1 to 10 of 10