Search:

Type: Posts; User: copyman

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Replies
    5
    Views
    229

    Re: Konica C227 image

    Try cleaning print heads & IDC sensors (near transfer belt) and do gradation adjustment. If this don't work and depending on life counters may need the magenta drum replaced. You can swap color drums...
  2. Replies
    26
    Views
    1,262

    Re: Blurry Barcodes on Plastic

    Thanks for taking the time to update!

    If this went on much longer you may of ended up a permanent "psych ward" resident:)
  3. Replies
    1
    Views
    192

    Re: Konica Minolta new models.

    Probably covid & supply chain issues. They can't fulfill orders for the "i" series so why would they roll out new models. Plus they didn't / don't have toners for the machines and another reason no...
  4. Replies
    6
    Views
    248

    Re: Transfer belt blades?

    Copylite & Katun

    I've used the aftermarket belts & blades to rebuild the transfer units many times and have worked well. The belt & blade is same for the C224 to C554. Also same for "i" & "8"...
  5. Thread: Thank you all

    by copyman
    Replies
    9
    Views
    368

    [Misc] Re: Thank you all

    It's good you found out while still young. A career change can be a good thing. I'm a few years away from retirement after 40+ yrs in the copier business and it has changed a lot over those years....
  6. Replies
    21
    Views
    772

    Re: Konica C258 settings problem

    Are you leaving front door open when trying to update firmware? It has to stay open during F/W update
  7. Replies
    4
    Views
    272

    [Misc] Re: Konica Minolta C458 Humming/Whistle Noise

    Not much is on and little output from power supply with doors open. If happening when doors open then I would look at a fan making noise.
  8. Replies
    5
    Views
    956

    [CQ] Re: Bizhub C451 print problems in thick mode

    Wouldn't be the transfer belt or roller if only one color is affected. If only one color than I would look at that color image unit being low on developer.
  9. Replies
    5
    Views
    956

    [CQ] Re: Bizhub C451 print problems in thick mode

    You might need a fuser unit. If you run a lot of thick stock the fuser units life is shortened considerably, especially with the older models.
  10. Replies
    3
    Views
    196

    [CQ] Re: DV711C C654 developer

    Copylite - Aftermarket, Compatible, and OEM Copier Supplies and Products
  11. Replies
    3
    Views
    196

    [CQ] Re: DV711C C654 developer

    Yes we use aftermarket developer in the IU711 all the time and works just fine. Most of the time we just add some developer to IU's that have crashed and most will recover. Of course if IU is at 0%...
  12. Replies
    10
    Views
    386

    Re: Bizhub C283 Jamming

    If 150k or less on meter I always just spray the reg clutch with electronic cleaner and then canned air. With clutch on machine, no need to remove. Lube the reg roller bushings and should be good to...
  13. Replies
    5
    Views
    297

    Re: BH-C-284e, my first rusty CL8

    Attached are both replacement versions, the correct way and the shortened version
  14. Replies
    10
    Views
    654

    Re: KM bizhub 283 - manual paper feed problems

    Agree! I've seen new parts & accessories really cheap for this old model but would still fix it.
  15. Re: Why are my magenta prints Faded in one side? konica c360

    Still looks like developer is low.

    What are the levels under state confirmation in service mode. I suspect the magenta will be off.

    Aftermarket toner or drum? You can easily swap drum with...
  16. Replies
    10
    Views
    654

    Re: KM bizhub 283 - manual paper feed problems

    It's most likely the clutch but if you change all those parts or the complete manual feed tray issue should be solved.


    Of course first make sure pick up roller is good
  17. Replies
    4
    Views
    199

    Re: konica minolta 224e fax problems

    See attached. Check marketing is correct & do fax initialization. Both in service mode. Make sure to turn main power off and back on after exiting service mode.
  18. Thread: Biz hub c425

    by copyman
    Replies
    12
    Views
    471

    Re: Biz hub c452

    A typo? The wrong model # is more than a typo. How about page count, direction of paper, what you have done so far, etc, etc?

    Get off that low horse and provide correct information! It will help...
  19. Thread: Biz hub c425

    by copyman
    Replies
    12
    Views
    471

    Re: Biz hub c425

    Even though you mainly deal with Canon the least you could do it provide an accurate model #. Sorry I refuse to even try and help without some very basic information. Model #, Page count, Direction...
  20. Re: Develop Ineo+258(Konica Minolta B. C258)tray 1 and tray 2 need a lot of power to

    I've seen where tray is really hard to open on the 4 series but not the 8 series... yet. It helps to put some light grease on the white piece that retracts when you pull on tray handle. Also have...
  21. Replies
    17
    Views
    468

    [Misc] Re: Konica minolta c452 light print at bottom

    I would start with at least the Magenta Image unit. Or split the IU open and clean corona, etc. Maybe add a little aftermarket developer.
  22. Replies
    13
    Views
    679

    Re: C258 Recycling Coil Broken

    How long has the original toner been in? Did you put original toner in when you installed new drum & developer as mentioned in your OP? It takes some time for the good toner to work it's way in. If...
  23. Replies
    17
    Views
    468

    [Misc] Re: Konica minolta c452 light print at bottom

    I would try removing and cleaning the laser PH. Could also be a drum problem even with 15K, especially if the drums are old.
  24. Replies
    13
    Views
    679

    Re: C258 Recycling Coil Broken

    What is the page count? Genuine or aftermarket toner?

    Keep in mind "any" over life consumable can affect "any" other color.
  25. Replies
    22
    Views
    971

    Re: Stains on copy model 308e

    After all the guesses hopefully the OP will report back with what it turned out to be.......
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4