Search:

Type: Posts; User: fshead

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Replies
    18
    Views
    928

    Re: New MP 301 drums

    I could never grasp why they didnt go to the mpc2800,mpc3001,mpc3003 et etc PCDU design.
    It just show pure stupidity on ricohs part..
    My happiest day was when i tossed 3-4 crates of ricoh type 1027...
  2. Replies
    18
    Views
    928

    Re: New MP 301 drums

    AS ONE who no longer sells any of these B/W units my feeling is there is not enough room if the machine starts to add too much toner.
    I saw it on the type 1027 all the time and when i rebuilt them i...
  3. Replies
    4
    Views
    211

    [Error Code] Re: Aficio 2051sp SC818

    mp2051 is a bw same engine as the mp5500/mp6500.
    way old and i have not seen one in 5-6 years
  4. Replies
    17
    Views
    569

    Re: Ricoh Aficio 2051 stains

    no its a b/w like the mp6500
  5. Replies
    17
    Views
    569

    Re: Ricoh Aficio 2051 stains

    honestly i ve bought a lot of ricoh parts on ebay and they looked just like OEM.
    I would take everything out and use a compressor to blow out the inside of unit and then reassemble it.
    The mylar...
  6. Replies
    23
    Views
    659

    Re: Red line on print Ricoh MP C2051

    I Gotta chime in on these as i sold a lot of them and outside of the crappy trays,and right door plastics found the drums to be solid.
    You can mod the "hard" charge roller but dont touch the soft...
  7. [Misc] Re: SP2194 and MUSIC Execution Results - Where's the table?

    Did you pull and vacuum out or change the ITB cleaning unit?
    I have seen hair and other debris on many lease returns and swap the unit out if i am pressed for time..
    i have to check those two codes
  8. Replies
    11
    Views
    516

    Re: adding a SOP panel to a normal mpc4503?

    THAT S GIVEN BUT when i see a post saying new controller will be needed I do not want to brick a low meter mpc4503.
    I put this machine to the side and had other more immediate work,non copier thank...
  9. Thread: MP C4500

    by fshead
    Replies
    13
    Views
    616

    Re: MP C4500

    IF it was wrong model ie trying to use a mpc2800 k toner in a mpc3501 machine.
    It will not even see the toner installed and act like no cartridge is installed.
    Now accepting a cartridge and trying...
  10. Thread: MP C4500

    by fshead
    Replies
    13
    Views
    616

    Re: MP C4500

    Spiking will only allow you to know pump is bad,,if it is K pump you could swap cyan and at least be able to print B/W..
    I might have a cheap working pump here..
  11. Thread: MP C4500

    by fshead
    Replies
    13
    Views
    616

    Re: MP C4500

    machine will not reset NEW TONER added till toner needs are met,you could check VT reading
    for that color and if it is 4-5 it is undertoned and as stated toner pump..IF needed just spike the dev...
  12. Replies
    9
    Views
    468

    Re: System Software for Fiery E-25C

    GOOD LUCK calling EFI................
    they act like they are GODS when i called in the past............NO HELP AT ALL..SNOBS
    I would say look on ebay or check with techs here and see if they can...
  13. Replies
    15
    Views
    1,261

    Re: c6003, c6004 pcu

    Curious are these Ricoh rebuild kits or chinese knockoffs?
    I have swapped a couple chinese drums on low meter return with a small scratch or pin hole and so far so good..
    Not heavy volume accounts...
  14. Replies
    11
    Views
    516

    Re: adding a SOP panel to a normal mpc4503?

    Thanks DEBS but when you say controller are talking controller where the nic,FW SD card ports and fax option mount or on the control panel?
    I have only done this upgrade on a MPC401 a long while ago.
  15. Replies
    11
    Views
    516

    Re: adding a SOP panel to a normal mpc4503?

    I am no expert but i thought the SOP panel was swap and do certain service modes changes and good to go...
    If the controllers were different wouldnt there be two different models of mpc4503?
  16. Replies
    12
    Views
    650

    [Misc] Re: Printer options not available in 3503/6003

    Shouldnt you ask who you bought these from??????????????????
  17. Replies
    7,495
    Views
    400,859

    Re: Latest on the Corona Virus

    I am in ny and they are playing politics..Walmart can give it and others cant.
    They pick and choose who they "allow" to give the vaccine..not by merit..
    if you go on the ny state site and ask for...
  18. Replies
    11
    Views
    516

    Re: adding a SOP panel to a normal mpc4503?

    thanks SLIM..
    I will look thru it later today
  19. Replies
    11
    Views
    516

    adding a SOP panel to a normal mpc4503?

    hi
    I was asked to add a sop panel to a mpc4503 that i have.
    I checked my mpc4503 manual and could not find anything for SOP conversion.
    From the past i remember you have to flash the SOP engine or...
  20. Replies
    15
    Views
    1,983

    Re: C4503 vs. C4504 similarity

    does the developer unit mount inside?
    TRicky rico likes to swap wires and sometimes muck with the td sensor under the dev unit...
    I feel like "MONK" sometimes when i have to use a printer part on a...
  21. Re: customer moved and want to use a cell phone hot spot to print/scan?

    WHOEVER said LAWYERS are smart.............
    They refuse to heed my concern for not having any antivirus on any of their PCs......
    I am done trying to talk people into common sense............just...
  22. Re: customer moved and want to use a cell phone hot spot to print/scan?

    I dont there is any router or switch...
  23. Re: customer moved and want to use a cell phone hot spot to print/scan?

    they did precovid but moved and my thought they are trying to avoid and extra expenses..
    I honestly hate going as they all hit me at once with a million different PC requests or needs which
    leaves...
  24. Re: customer moved and want to use a cell phone hot spot to print/scan?

    HI
    I dont know and almost dont care..
    I hate doing things ass backwards..
    I spent time yesterday trying to talk the secretary who has no computer knowledge
    through connecting up a PC to print...
  25. Replies
    14
    Views
    636

    [Misc] Re: Ricoh MPC5502 Parts Manual

    i think the metal white piece is backwards..I dont have one to reference here..
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4