Search:

Type: Posts; User: GIUBOSS

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    2
    Views
    155

    Re: HP M553 Fuser reset option not showing up

    If the procedure is correct, you probably have a software problem, try to reset and update the firmware. Have you tried on the web page?
  2. Replies
    5
    Views
    170

    [Error Code] Re: Pro C5100 - SC401-01

    Genuine drum? Old developer? Did you clean the surface of the developer roller? Try cleaning the ID sensor and then running the manual process check.
  3. Re: Need service manual for Canon I-Sensys MF628Cw

    Let's write in private
  4. Replies
    7
    Views
    269

    [Jamming] Re: Ricoh MPC6503 (Charis) - Jam code 025

    was the previous replacement problem the same? Original replacements? duplex, any size / paper tray?
  5. Re: Ricoh SP 5300DN wont print "Load paper in bypass tray" error message

    check the document size if it matches the tray where you intend to print, or select tray 1 and not auto tray select.
  6. Re: Ricoh SP 5300DN wont print "Load paper in bypass tray" error message

    Before starting a new print you should check the print in progress in the printer properties and cancel the current job, otherwise the printer will continue to ask for paper in the tray used at the...
  7. Thread: Reset

    by GIUBOSS
    Replies
    3
    Views
    112

    Re: Reset

    if your machine has a lock with an access code, you need to log in to administrator mode. As a last resort, restore in service mode
  8. Thread: Reset

    by GIUBOSS
    Replies
    3
    Views
    112

    Re: Reset

    you have already tried with the default: Admin, pw. : Admin?
  9. Re: Konica Minolta 654e service manual request

    read private messages
  10. Replies
    6
    Views
    222

    [Jamming] Re: MPC 5000 tray 2 Guid plate

    remove the duplex for easier access to the guide plate
  11. Re: NEED FINISHER - Ricoh C3503 SR-3130 or SR-3150

    hello I might have it but I'm in Italy
  12. Re: Ricoh MP 2550B gray copies & now says add toner all the time

    when you say, "and it looks like no toner is entering the developer" you mean you've separated the drum from the developer's box or don't seen it in the pcdu unit hole? Sometimes when replacing the...
  13. Replies
    3
    Views
    217

    Re: iR ADV C3530i Gen 1 - "Ghosting"

    I agree with you on developers C and M, I had a similar problem on a Ricoh a few years ago but I changed the whole unit
  14. [CQ] Re: RISO RP3700 blank lines through image via USB only

    hi, I think they are two ways of printing with clearly different settings. Have you tried with print adjustments in the driver as you mentioned? A bit old duplicator. What are the conditions of...
  15. Replies
    3
    Views
    227

    Re: RC6300 Drum Rotation Reset Issue

    I think that you probably accidentally bumped the ink sensors while cleaning, make a comparison with the drum working with all its parts if reassembled correctly. Have you tested the ink pump?
  16. Replies
    2
    Views
    112

    Re: Samsung Xpress M4075FW not resetable

    what the display shows
  17. Re: mpc3002 L.E. registration ADF for rear side

    it's not because the adjustment itself shifts the entire image, check in the birth certificate, there should also be a margin adjustment in copy mode in the user tools.
  18. Replies
    1
    Views
    138

    Re: Riso Comcolor 7150 does not power up

    Hello you are a technician, just to know, look for a used one on the web or take it to a qualified service center, some companies overhaul electronic boards at an affordable price, you will save...
  19. [Electrical] Re: Konica minolta bizhub c550 nota Energinzing

    rotation detection sensor housing and photo sensors, replace them, drive motor, then PRCB ....
  20. Replies
    18
    Views
    527

    Re: MP 6001SP WEB MOTOR

    Have you tried updating the firmware?
  21. Replies
    20
    Views
    610

    Re: mp4002 dirty egde, only lateraly

    check the copper bearings of the charge roller if worn. Have you already tried with the other whole drum unit?
  22. Replies
    20
    Views
    610

    Re: mp4002 dirty egde, only lateraly

    with the high number of copies made, it may be that the toner collection section (behind the cleaning blade) has fluff that obstructs the passage of the used toner and rejects it before it goes down...
  23. Replies
    20
    Views
    610

    Re: mp4002 dirty egde, only lateraly

    what do you think of the fuser unit and web roller etc.
  24. Re: Dead Canon IRC 2380i only green power light ON, NO control panel operation

    maybe it meant that he blocked the machine to take away the electronic boards ...
  25. Replies
    1
    Views
    326

    Re: Lexmark mx511dhe

    Hi, I don't want to lead you astray but have you tried to access the printer from the web? I found this ......
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4