Search:

Type: Posts; User: sandmanmac

Page 1 of 20 1 2 3 4

Search: Search took 0.09 seconds.

  1. Re: "call service" in WIM without any further description

    Coincidentally, I just licked up and MP C406 that has the same behavior. If you click on "System" it will display the error, which as expected, was an "RC gate error".
    I also just realized that I...
  2. Re: "call service" in WIM without any further description

    A lot of used machines I pick up show an "RC gate connection error" in the WIM when I connect them to networks, with no other messages.
    I run SP5806-209 (Remote Service / Install clear) to clear...
  3. Replies
    31
    Views
    1,688

    Re: CL7000 Alignment

    For letter size paper, and under "ideal" conditions, with PM life of 50K for PCU/ 100K for Dev/30 K for Oil supply unit / 100K for fuser (just to name the main stuff), that doesn't seem to be...
  4. Replies
    25
    Views
    1,560

    Re: Ricoh MP C307 Doesn't Work After Moving

    Yup.
    Seems to me I suggested that more than a couple of weeks ago.
  5. Replies
    5
    Views
    304

    Re: 7960 or 7-960 (system) SP mode IM 4000

    Great explanation Tim!
    I've been using a car analogy to explain PM's to my customers for some time now (City miles Vs. Highway miles) to help explain the PM cycle. It seems to make it more...
  6. Re: Where to find instructions for SMB Scan and Email Scanning Ricoh IM C3000

    You asked for setup instructions. I don't mean to sound rude, but that is a configuration setting which a SM is not required for, and there are readily available, user friendly HTML versions of all...
  7. Re: EthWalletConnect是世界上最著名的以太坊錢包,2021年最佳ETH錢包,這是迄今為止最 &#

    Excellent! This google translate nearly made me spit out my coffee!!!:p
  8. Re: Ricoh C2800 - Power, but doesn't turn on...

    Your machine isn't booting up at all. The firmware and/ or HDD are not the issue.
  9. Re: Ricoh C2800 - Power, but doesn't turn on...

    Are you saying that they actually paid money for a 13+ year copier in this condition?
    I really, really, hope not:(

    Is there no sign of a boot at all (Ie: no motor drive, fuser warm up, etc.?)
    ...
  10. Re: Sc 66x occurs - sp mode displayed in japanese

    I can't respond to you based on experience, but which of the MANY 66x-xx codes are you getting, because there are very specific references listed in the SM based on the sub-code, and several...
  11. Replies
    21
    Views
    1,033

    Re: mpc3002 scan to folder - cable versus wifi

    Yup....Just ran into this yesterday as a matter of fact.
    It's (sort of) a new customer, small office of 3 -4 people and the owner just asked me if I would setup a new laptop to the Ricoh machine...
  12. Replies
    12
    Views
    892

    Re: SP 4510SF, Cannot print from USB

    This is a fact.

    (Welcome back, Debs :))

    Edit, I didn't see your follow up post confirming this until after I posted mine :o
  13. Re: Reason I haven't been around for a little while

    I'm sorry that I missed this thread until now.
    My condolences to you Debs, and as others have said, I also think of my parents every day.
    It takes some time, but it does get easier, and now my...
  14. [Electrical] Re: MP 3352 Missing text/blank line on scanned document

    So you said to Slim, verbatim, several hours ago.
    What gives?
  15. [Electrical] Re: MP 3352 Missing text/blank line on scanned document

    What?? Am I missing something here?:confused:
    This should make ZERO difference in the size of anything, unless you've got some dirty/ defective paper size sensors :confused:
  16. [Electrical] Re: MP 3352 Missing text/blank line on scanned document

    The Ricoh firmware update tool is now available to everyone for free on the driver download page for the past several months
  17. Re: Mpc 3004ex, dont recognize sd card from slot 2, despite controller replacement

    While it does seem to be a bit of an unusual issue, are you opposed to trying/ using the firmware update tool to update it? Who knows, maybe afterwards the card will be recognized:confused:.
    ...
  18. Re: Mpc 3004ex, dont recognize sd card from slot 2, despite controller replacement

    My apologies if that's the case.
    Admittedly, I only looked at the C3003 manual because thats all I had at the time, which stated slot 1, and its always been slot 1 on others to the best of my...
  19. Re: Mpc 3004ex, dont recognize sd card from slot 2, despite controller replacement

    How about trying slot 1 since that is the slot used for F/W updates?
  20. Re: Aficio MP 3351 ~ Current Firmware Version ? ~ Lost ability to scan to email

    A Firmware update tool is now readily available to anyone on ricoh driver download page.
    It's unlikely that f/w will resolve the issue. It's more likely related to changes to whatever mail server is...
  21. Replies
    25
    Views
    1,560

    Re: Ricoh MP C307 Doesn't Work After Moving

    Mark is 100% correct!
    The wi-fi setup is ONLY for the Op panel, and not for printing and scanning.
    You're obviously in over your head.
    Contact someone who knows what they're doing
  22. Replies
    31
    Views
    5,819

    Re: scan to gmail settings Ricoh mpc3003

    1: Read the entire thread
    2: the thread is over 2 years old, so I think a safe assumption would be that the issue is sorted
    3: Simply disabling 2FA is NOT the solution, because "use less secure...
  23. Thread: Ricoh mp301

    by sandmanmac
    Replies
    7
    Views
    643

    [Misc] Re: Ricoh mp301

    :mad::mad:
    50245
  24. [Misc] Re: Unable to get in SP mode to clear part counter

    Thanks Mika....
    I'm mostly just regurgitating stuff I've read and learned here from others along the way.
    I can't remember for sure who the first person was that suggested that in a thread to...
  25. [Misc] Re: Unable to get in SP mode to clear part counter

    You can't be that "new" to Ricoh if you bought it new. It's a few years old afterall:confused:
    I'm assuming that you're using the updated SP mode procedure (806182)?
    SP mode access can be changed...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4