Search:

Type: Posts; User: Gift

Page 1 of 20 1 2 3 4

Search: Search took 0.09 seconds.

  1. Replies
    12
    Views
    567

    [Misc] Re: Ricoh mpc 2011 slow printing

    did you really check the port at the customers driver setting? If yes, try a quicky test with your laptop + direct lan connection to rule out the MFP or customer it.
  2. Replies
    12
    Views
    567

    [Misc] Re: Ricoh mpc 2011 slow printing

    +1 for WSD or perhaps a crappy wlan connection in case there's a wireless network
  3. Re: Bizhub c224e problem "Serial number must be entered" -> "TPM Chip has been change

    Guess you need a little luck. We had a few cases with success and some without - I recall at one time we also had to put a new ssd board in to revive the MFP board but in and start the MFP with the...
  4. Thread: Fuser Sleeve

    by Gift
    Replies
    7
    Views
    544

    Re: Fuser Sleeve

    I think the sleeves for the higher speed MPCs uses a different lamp with higher wattage/more power - from my experience they work for the slower units, too but not vice versa. Haven't tested it with...
  5. Re: Bizhub C258 artefacts, strange lines on printouts

    Still interesting, I never really fiddled round with KM voltages, too so I'll keep that one in mind and thx for that hint.
  6. Thread: key counter

    by Gift
    Replies
    17
    Views
    1,889

    Re: key counter

    As for the newer machines we always use the key counter adapter. Here's a pic of it tweaked for use with mechanical counters - the jumper unlocks the MFP and the brown wires are hooked up to the...
  7. Re: Bizhub c308 c368 konica minolta discontinued parts

    nope... we still pot those in the field 2nd hand. I think is just an announcement wich comes ~5 years after the last production. Consumables are available for more years to come, same goesfor most...
  8. Replies
    1
    Views
    110

    Re: Developer chip solution pls

    :confused::confused: you tried 20 td sensors? dude...

    I'm not quite shure but I barely recall that - on this series - there's a different chip for new unit detection at the front but...
  9. Re: Bizhub C258 artefacts, strange lines on printouts

    service program
  10. Replies
    10
    Views
    421

    [CQ] Re: Yellow background on print outs

    I encouter issues like that every day lol. You can swap the drum unit between other colors and check if the problems stick with yellow or moves. Perhaps the drum unit is bad or he waste toner area by...
  11. Re: Bizhub C258 artefacts, strange lines on printouts

    Have you tried and clear all memory via in SP? (do a USB backup first)

    Usually I'd also say it looks related to the stuff you already swapped - perhaps you should really go with a new drum unit...
  12. Thread: Image "repeat"

    by Gift
    Replies
    14
    Views
    802

    Re: Image "repeat"

    +1 for the drum unit, probably a limitation since it's produceable on other units - seems a little more charge remains on the unused drum surface after the erasing phase. Changing the image rotation...
  13. Replies
    19
    Views
    1,307

    Re: Ricoh C2800 - Power, but doesn't turn on...

    I'd expect this to be the normal state if the PSU (for some reason) does not get the ready signal to fire up all voltages. If you have access to another ricoh you can try and disconnect all BICU/IOB...
  14. Replies
    25
    Views
    1,560

    Re: Ricoh MP C307 Doesn't Work After Moving

    some end up printing SMC lists... well, printing it is lol^^
  15. Replies
    5
    Views
    253

    Re: SP 5210SF wont fax in afternoon

    Perhaps the line quality is bad at certain times because of too much load or bandwith issues - most analogue devices are hooked up via adapters to the "VoIP cosmos". You can try and optimize the...
  16. Re: transfer case assembly on a mpc3501 vs a mpc2800

    I'm sitting next to a 3mpc001 and this one has the thicker roller compared to MPC2500 (not shure what the 2800 roller looks like though^^)
  17. Replies
    23
    Views
    1,747

    [Misc] Re: Toner compatibility

    You probably have good chance if the fuser temp targets are within the same margin, otherwise this might backfire.
  18. Replies
    10
    Views
    975

    Re: Canon class action lawsuit? LOL.. good luck

    Better Call Saul^^
  19. Replies
    2
    Views
    155

    Re: What machine is on picture

    I think it's a brother MFC-L3xxx series
  20. Replies
    4
    Views
    619

    Re: C450i Colour Drums

    The differences between the units are mainly the rear cover + charger roller contact and the waster toner auger (differnet length) + nozzle thingy and - if I remember correctly - that "gearish" thing...
  21. Replies
    19
    Views
    1,307

    Re: Ricoh C2800 - Power, but doesn't turn on...

    It's possible, this series vanished in my field years ago due to it's age so that BICU issue was the last thing I recalled. Of course it's possible that the PSU is bad but it's also possible that...
  22. Thread: MPC4503 SC501-02

    by Gift
    Replies
    1
    Views
    185

    Re: MPC4503 SC501-02

    We had a few bad actuators for paper end detection causing this - they can get broken or bent
  23. Thread: C454e blue spot

    by Gift
    Replies
    6
    Views
    413

    Re: C454e blue spot

    perhaps the dev unit itself or the cooling airflow/filters needs to be checked or replaced
  24. Replies
    19
    Views
    1,307

    Re: Ricoh C2800 - Power, but doesn't turn on...

    I always repaired them with a large "blop" of solder to bridge the faulty resistor + new polygon mirror motor ;)

    I'd bet nowadays most of these machines are still printing in copier export...
  25. Re: Where to find instructions for SMB Scan and Email Scanning Ricoh IM C3000

    RTFM^^:p:cool:
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4