Search:

Type: Posts; User: aAandy

Page 1 of 13 1 2 3 4

Search: Search took 0.01 seconds.

  1. Thread: AP4 C4470

    by aAandy
    Replies
    2
    Views
    192

    Re: AP4 C4470

    Many thanks! I'll make the change and see how it goes
  2. Re: xerox doesnt print yellow, and stripes magenta

    those diagonal stripes always mean developer is depleted! magenta is very low on developer and yellow may have no developer left at all - most commonly developer is depleted by dirty coronas which...
  3. Thread: AP4 C4470

    by aAandy
    Replies
    2
    Views
    192

    AP4 C4470

    hello everyone

    for the second time in a few months this machine has had a waste toner blockage resulting in a dead drum - removed and vacuumed everything, checked waste toner drive is working OK,...
  4. Thread: MFC-L3750

    by aAandy
    Replies
    4
    Views
    331

    Re: MFC-L3750

    connected via USB, but i will take my laptop & use a crossover and see if there's more info in the web interface
  5. Thread: MFC-L3750

    by aAandy
    Replies
    4
    Views
    331

    MFC-L3750

    client put in new aftermarket toners & manually reset toner counts - machine is not recognising one (or more) of the toners at all, but it doesn't say which one! just displays "no toner"

    client...
  6. Replies
    0
    Views
    185

    iRA C3320 error E025-0410

    read several threads about this, replaced C/K bottle drive assembly, fault returned 2 days later

    any tips please?

    edit: found the problem, there's a locking plate underneath the bottle drive...
  7. Thread: ColorQube 8570

    by aAandy
    Replies
    2
    Views
    257

    Re: ColorQube 8570

    thanks for the pointer! much appreciated - will let you know how it goes
  8. Thread: ColorQube 8570

    by aAandy
    Replies
    2
    Views
    257

    ColorQube 8570

    hello everyone

    this machine constantly says "cassette guides not adjusted" and jams with the print poking 3/4 the way out of the exit - this does not happen when printing from bypass, including...
  9. Replies
    21
    Views
    1,084

    Re: Ricoh Pro C7100X SP mode

    bit of an asshole huh? then don't bother replying! insight my ass!!!! the answer was in my query numbnuts
  10. Replies
    21
    Views
    1,084

    Re: Ricoh Pro C7100X SP mode

    i guess my 38 years of field service experience doesn't quite cut it huh?
  11. Replies
    21
    Views
    1,084

    Re: Ricoh Pro C7100X SP mode

    thank you!
  12. Replies
    21
    Views
    1,084

    Re: Ricoh Pro C7100X SP mode

    all i need to do is SC reset! please advise how to get into factory mode
  13. Replies
    21
    Views
    1,084

    Re: Ricoh Pro C7100X SP mode

    changed it from what? what is the factory method for entering SP mode?
  14. Replies
    21
    Views
    1,084

    Ricoh Pro C7100X SP mode

    hello everyone

    i have all the manuals for this machine, however the manual states clearly

    Entering SP Mode:
    For details, ask your supervisor

    also googled to no avail! does anyone know if...
  15. Replies
    6
    Views
    635

    Re: OKI MC 873 paper detect arm

    while nobody could confirm that is actually the paper detect sensor (even OKI) i just went and ordered it anyway - took them 2 months but i'll finally have it tomorrow

    thanks again, very much...
  16. Replies
    6
    Views
    635

    Re: OKI MC 873 paper detect arm

    thanks for going to the bother, but wrong part
  17. Replies
    6
    Views
    635

    Re: OKI MC 873 paper detect arm

    unable to reach photo interrupter without dismantling half the machine - ended up fashioning something out of a paper clip
  18. Replies
    8
    Views
    1,674

    [Jamming] Re: MFC-9330 constant rear jams

    i apologise! normally i return to update threads for this very reason - unfortunately i have repaired several thousand machines of all types, makes and models since then and cannot recall the outcome
  19. Replies
    6
    Views
    635

    OKI MC 873 paper detect arm

    hello everyone

    a client moved their machine and the end of the cassette paper detect arm went missing, (small flag with spring) so it no longer detects paper - i have the parts manual but for the...
  20. Replies
    6
    Views
    579

    Re: Kyocera M8124 firmware

    no error code, it just hangs requiring reboot - i haven't attended as yet
  21. Replies
    6
    Views
    579

    Kyocera M8124 firmware

    hello people

    i have a machine which is randomly hanging, client has to turn off and on, i'm hoping a firmware update may resolve the issue, but i have no access to Kyocera firmware

    can anyone...
  22. Replies
    3
    Views
    518

    Re: E Studio 3505 not recognising USB HDD

    thanks for the info, the 2TB HDD is a Toshiba drive and is not recognised at all - and considering what you've said, i wonder why the 5TB Seagate was both recognised and stored scans before i messed...
  23. Replies
    3
    Views
    518

    E Studio 3505 not recognising USB HDD

    hello everyone

    client has two external USB HDDs, one is 2TB and one is 5TB, however the machine doesn't recognise them - is there any trickery i can perform to the drives to make them usable on...
  24. Replies
    13
    Views
    2,743

    Re: Canon iPF-710 error 03800500-2F30

    under the main Copytechnet.com banner above, you see a little house on the left with the following words next to it: Forum > Technical Forums > Copier Technical Discussion > Canon

    click on Canon...
  25. Replies
    13
    Views
    2,743

    Re: Canon iPF-710 error 03800500-2F30

    so, i attended the machine, performed nozzle test, next to nothing printed - performed head replacement and cleaned up head, refit , machine spent half an hour refilling ink and nozzle checking...
Results 1 to 25 of 323
Page 1 of 13 1 2 3 4