Search:

Type: Posts; User: Kiran Otter

Page 1 of 20 1 2 3 4

Search: Search took 0.31 seconds.

  1. Re: L26500 (Latex 260) after replacing the belt get 79:04

    The error certainly seems to talk about the 'pens' (printheads) so yeah, I'd say you have a bad printhead somewhere. Maybe swap them with their sisters and see if something changes.

    Kiran
  2. Re: HP DesignJet T1700 Print Head errors

    My apologies for not replying to this sooner, I simply missed the post.

    The T1700 indeed uses universal printheads, which once inserted can not be moved to another slot/color. If you're uncertain...
  3. Replies
    1
    Views
    89

    Re: HP DJ 510 error 11.11

    Most of the time it's the trailing cable. Sometimes you can have a bad electronics module or carriage but in my experience they are rarely the cause of an 11:11.

    Kiran
  4. Replies
    4
    Views
    185

    Re: HP DesignJet T525 36"

    This is just a guess but the printer thinks it has 24" paper loaded, and you're telling it to print on A1 paper which is slightly narrower, so there's a mismatch. Print using an Arch D paper size...
  5. Re: HP Designjet 500 44" and 24" Driver Problems Win10

    And here's the update for build 2004 of Windows 10. Hopefully this is the end.

    https://support.microsoft.com/en-us/help/4567523/windows-10-update-kb4567523

    Kiran
  6. Re: HP Designjet 500 44" and 24" Driver Problems Win10

    I found this (finally) where MS is tracking the printing issue with build 2004. At the moment they're investigating it.

    Windows 10, version 2004 and Windows Server, version 2004 - Windows Release...
  7. Re: HP Designjet 500 44" and 24" Driver Problems Win10

    Microsoft has released a fix. https://support.microsoft.com/en-us/help/4567512/windows-10-update-kb4567512


    Kiran

    edit: Just a note, this fix apparently does not apply to Windows 10 2004. ...
  8. Re: HP Designjet 500 44" and 24" Driver Problems Win10

    This is a known problem with KB4560960. See https://support.microsoft.com/en-us/help/4560960/windows-10-update-kb4560960

    "After installing this update, certain printers might fail to print. The...
  9. Replies
    2
    Views
    225

    Re: Hp scitex fb 750

    I also wanted to mention... The reason the printer I dealt with had so many bad heads; we had a hurricane that knocked out the power for several days. The battery backup that kept the head vacuum...
  10. Replies
    2
    Views
    225

    Re: Hp scitex fb 750

    I would avoid removing the printhead unless you intend to replace it with a new one. You can disconnect the ink and vacuum tubes and put head flush right into the problem printhead. Then reconnect...
  11. Replies
    7
    Views
    693

    Re: Hp latex 360

    Can you post a picture of what you are describing? Is the carriage rubbing the media there?

    Kiran
  12. Replies
    7
    Views
    693

    Re: Hp latex 360

    A problem with the encoder strip usually causes a 86:01 paper jam message. A 42:03 has to do more with the load put on the motor moving the carriage.

    I should have also mentioned that the...
  13. Replies
    7
    Views
    693

    Re: Hp latex 360

    The scan axis would be the path the carriage travels. Make sure there's nothing blocking it; paper, foreign objects. With the printer off, pull the maintenance cartridge forward, then pull the...
  14. Re: HP Designjet 4500 Scanner-after a while starts only scanning center one-third onl

    So yeah, the moral of the story; always erase the parameter blocks after replacing any boards, then run the standard calibration.

    Kiran
  15. Re: HP Designjet 4500 Scanner-after a while starts only scanning center one-third onl

    Yes, I have those two boards. I also have a power supply since I'm going to junk my scanner (it's got a bad interface board.) At least the power supply is the same.

    I'll PM you about the...
  16. Re: HP Designjet 4500 Scanner-after a while starts only scanning center one-third onl

    I got all your PMs. :)

    Yes, it sounds like you're on the right track. If the power supply checks out then it may be OK. You'll have a new main PCA in a couple days so we'll see if that's the...
  17. Re: HP Designjet 4500 Scanner-after a while starts only scanning center one-third onl

    I found the service manual online and it tells what voltages should be expected.

    Check And Adjustment Of The Switch Mode Power Supply, Smps; Ac Voltages; Dc Voltages; Adjustments - Contex COUGAR...
  18. Re: HP Designjet 4500 Scanner-after a while starts only scanning center one-third onl

    I'll send you a PM on the price. I would though probably try a new power supply first. I wish I has one to offer, but LPS does have them.

    Maybe put a DVM on the various outputs of the power...
  19. Re: HP Designjet 4500 Scanner-after a while starts only scanning center one-third onl

    Well I've never seen one that scanned black that didn't have a bad bulb/driver board/power supply.. causing the lamp not to be lit. So I don't know what your issue is. The 55-203 means it can't...
  20. Re: HP Designjet 4500 Scanner-after a while starts only scanning center one-third onl

    This might sound like a dumb question, but is the lamp lighting?? :) If it's like every one of these scanners I've seen, the power supply is bad, and/or the driver board. And note you can have a...
  21. Re: HP Designjet 4500 Scanner-after a while starts only scanning center one-third onl

    The motors won't affect it scanning the entire width of the page, only the calibration. If the motors failed you would see a disjointed image because they can't align the cameras together.

    If...
  22. Replies
    3
    Views
    235

    Re: HP DJ Z5400

    If the cartridges are under warranty (before the date on the cartridge) then return them and get replacements. Always rule out consumables before attempting to fix the printer.

    If multiple...
  23. Re: L26500 or Latex 260 system error 24:10 broken bag error

    I don't have anything to add about a 14.08. Just have to go through the service manual and try to troubleshoot it. Only thing I can suggest is try swapping the two circuit breakers. Maybe it's a...
  24. Re: L26500 or Latex 260 system error 24:10 broken bag error

    I don't know. I would think you'd get that error when it attempts to heat up. Make sure if you're just using bond paper to choose an 'aqueous' media selection. There's also a way to disable the...
  25. Re: L26500 or Latex 260 system error 24:10 broken bag error

    Yes, the EEROM reset will clear the broken bag status.

    Kiran
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4