Search:

Type: Posts; User: blackcat4866

Page 1 of 20 1 2 3 4

Search: Search took 0.91 seconds.

  1. Re: BH-C-360, external box function settings

    Authentication Device 1 & Authentication Device 2 will make that option disappear. I think that I'd check Stop 9 Vendor Mode.
    =^..^=
  2. Replies
    4
    Views
    115

    Re: e-studio 257 adi

    You do still have to format and re-load firmware.
  3. Re: How to increase printing speed of Large PDF files, 2000+ pages

    Would this phenomenon explain why a PDF document would multiply x10 or more in size in the print queue?
    Is this BullZip anything like CutePDF? I've been using this for many years. For a long time...
  4. Replies
    6
    Views
    185

    Re: Bizhub 284e loses IP address

    Is it set to DHCP or Static? =^..^=
  5. Re: Konica Minolta Bizhub 363 - scanner problems

    There's a lot more to focus than just a tweaked scanner frame. =^..^=
  6. Re: Konica Minolta Bizhub 363 - scanner problems

    The scanner is out of focus. =^..^=
  7. Replies
    9
    Views
    165

    Re: Trommel says hi

    Welcome! =^..^=
  8. Re: Difference between C and K Toshiba drums - AC series

    I think that you'll find that the scorotron and grid do not last the full 200K, so it makes the most sense to me to use the lower yield drums, and do a black PM at 120K.

    We've noticed a few of the...
  9. Replies
    9
    Views
    267

    Re: C452 with not the lines of shame.

    It sounds to me like an image processing issue. I solved an issue like this once by re-seating ribbon cables to the laser unit. I'd also check that you don't have a contact peeling back of the ribbon...
  10. Replies
    6
    Views
    186

    Re: bizhub c454e problem with fw update

    Congratulations on your success! =^..^=
  11. Replies
    5
    Views
    196

    Re: BH-C-3110, CE Password

    I'm willing to take a gamble that the password is not changed, it's just a little more difficult to identify. I spent a good hour figuring this out. It's only a slight variation on the Konica Minolta...
  12. Replies
    6
    Views
    182

    [Misc] Re: E studio 256 paper tray lift

    Good to know, thanks. =^..^=
  13. Replies
    6
    Views
    186

    Re: bizhub c454e problem with fw update

    I'm thinking that your firmware was corrupted. I think that I would initialize the MFP board and re-load the firmware. If you haven't done it before it's a bit of a long drawn out process. I spent...
  14. Re: Difference between C and K Toshiba drums - AC series

    The black drum is designed to last ~200K, and the color drums ~120K. The front drum shaft is a different size, otherwise they are the same.

    So there are two ways you can go with this:
    1) if you...
  15. Thread: Novato

    by blackcat4866
    Replies
    5
    Views
    128

    Re: Novato

    Welcome! =^..^=
  16. Replies
    6
    Views
    182

    [Misc] Re: E studio 256 paper tray lift

    There are three photointerrupters in the paper feed unit. If the upper limit sensor is bad it will not attempt to lift.

    The cracked sector gear is a lot more common.

    On another machine, I had...
  17. Re: Bizhub C3350 (Image Shift and duplex error)

    What jam code? Cleaning the registration roller can help.

    Have you attempted to adjust the start timing? =^..^=
  18. Replies
    8
    Views
    158

    Re: Newbie from the Netherlands

    And humble, too. We could use a few of those.
    Welcome!
  19. Replies
    9
    Views
    388

    [Misc] Re: Canon IPF 825 image problem

    Use small amounts of EU-1. It's called grease but it's really an oil. Using the correct lubricant is important in this situation:

    43786

    =^..^=
  20. [Misc] Re: Kyocera users forget pin then can't delete job from private print queue

    OK, I was wrong.

    I looked through KM Net Viewer, KM-Net Admin, and the PreScribe commands. Any time user box deletion comes up it requires knowing the old password.
  21. Replies
    8
    Views
    246

    Re: c220 display wont turn on

    I just opened my manual > control+ F > then typed "DIMM"
    After a few clicks on "Next" it brought me right here. Amazing!:
  22. [Misc] Re: Kyocera users forget pin then can't delete job from private print queue

    True.
  23. [Misc] Re: Kyocera users forget pin then can't delete job from private print queue

    I don't think so. Those pesky boxes are hard to get rid of without the original password.
  24. Replies
    8
    Views
    246

    Re: c220 display wont turn on

    My suggestion is to change the page memory. When the screen becomes visible you'll most likely have additional error codes, but then you can read the screen and use the manual. =^..^=
  25. Replies
    8
    Views
    158

    Re: New bie from the Netherlands

    Welcome! =^..^=
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4