Search:

Type: Posts; User: InterfaceP

Page 1 of 19 1 2 3 4

Search: Search took 0.28 seconds.

  1. Re: Xerox Color 570 Please Reboot 116-334

    Try to format the HDD power off press and hold 4, power-saver and stop, then turn on. Keep it held until It gets to the splash screen..

    If that fails:

    ESS NVM Board is bad or the battery is...
  2. Re: Xerox DC252 IBT Belt impregnated with Cyan Toner.

    Sounds like it could be the Charge HVPS. It's the larger of the boards on the inside of the back door. Swap the connectors out and see if it moves to a different color.
  3. Replies
    5
    Views
    364

    Re: fault 094-322 xerox 242

    This has absolutely nothing to do with the Fiery.
  4. Replies
    5
    Views
    364

    Re: fault 094-322 xerox 242

    2nd BTR retract fail

    Really easy to fix, first order an new 2nd BTR

    In the mean time open the front door and locate the 2nd BTR. On the front side of the plastic cover for the drawer, look for...
  5. Replies
    2
    Views
    169

    Re: Xerox dcp 700 13-918

    Remove the trimmer and locate the the plastic guide from the booklet maker exit. It screws into the underside, cut about 2" off it. Unless you have the short one that come with the trimmer.
  6. Replies
    3
    Views
    180

    [Error Code] Re: xerox 700 error code 041-346

    I find it slightly entertaining that people think that everything has a NVM reset. :)


    41-346-IOT Driver Fuse Fail

    It could be so many different things. IOT PWB or the LVPS.

    See what...
  7. Replies
    4
    Views
    223

    Re: Xerox 700 smugging image

    The fuser temp cannot be regulated.
  8. Replies
    4
    Views
    223

    Re: Xerox 700 smugging image

    I doubt the fuser is rated for stickers, Actually I know its not. Best u can do is use the 350gsm setting for the paper.
  9. Replies
    1
    Views
    154

    Re: Xerox 770 error code 78-152 jams

    There should be a couple of adjustments that can be made on the HCF. One for the air(inboard side), one for the forward finger pressure (by the nudge roller) and one on the outboard side.
  10. Replies
    10
    Views
    1,042

    Re: Xerox 700 error code 041-344

    Yes, replace it they frequently go bad.
  11. Replies
    0
    Views
    228

    7800 Network Server Software

    Hey everyone, I'm looking for the Fiery software for the WC7800. I currently have v1.0 but was looking for v1.1 and v3.0.

    Thank you.
  12. Replies
    10
    Views
    1,042

    Re: Xerox 700 error code 041-344

    Sounds like the LVPS.
  13. Replies
    8
    Views
    470

    Re: xerox 700 duplex issue

    Pull the pre-registration unit out and you will see on the left, two shafts connected by a gear to the front, and one with a coupler on the back. The gear on the front is where the slipping occurs. ...
  14. Replies
    0
    Views
    135

    WC 7225 220v to 120v

    I don't have the SM for this machine and wanted to know what it takes to convert it from 220v to 120v, or if it's even possible.

    It's throwing a Fuser error (310-238) even with a 120v Fuser...
  15. Replies
    8
    Views
    347

    Re: Xerox C75 Grinding noise

    Did you ever fix the duplex problem from your previous post? It sounds like the duplex gears are slipping, and it will get worse $$$ if you continue to operate it.
  16. Replies
    3
    Views
    314

    [Dead] Re: BP2 Integrated fiery serverSW for 700i

    I do. Message me your email.
  17. Re: Xerox Docucolor 252 Network scanning icon not active

    You need the software and the USB Prep-Tool, both of which I have on my server. Message me if you would like them.
  18. Replies
    17
    Views
    1,388

    Re: Error code 042-326

    NVM reset for Fault 042-326 is 741-132
    Fault 042-327 has no NVM reset its a non damaging Fault.

    Little Video I made many moon's ago, pay attention to the reflective patch (1:53) and the sensor...
  19. [Misc] Re: docucolor 240 calibration with colorcal

    Review the procedure and try it again. Sounds like a user error.
  20. Replies
    9
    Views
    597

    Re: Xerox C75 Duplex problem

    I didn't see in the previous post that there was a audible grinding. This is typicality due to an excessive load on the gears, in which case you would need to remove all the rolls to clean and...
  21. Replies
    17
    Views
    1,388

    Re: Error code 042-326

    The search bar is a real thing.
  22. [Misc] Re: xerox 700 dcp not printing magenta after replacing drum.

    Well you definitely need developer material.
  23. [Misc] Re: xerox 700 dcp not printing magenta after replacing drum.

    Remove the drum and the 2 screws on the dev cover. Open it up and see how much developer material is in there, the auger should be a little over half visible.
  24. [Misc] Re: xerox 700 dcp not printing magenta after replacing drum.

    Check the contact in the back of the dev unit and on the back wall of the unit. The dev unit has a "L" shaped contact that inserts into a plastic piece with a spring in it.
  25. Replies
    5
    Views
    352

    [Jamming] Re: jamming with error code 077-115

    Assuming you did the procedure correctly, I would replace the CIS.
Results 1 to 25 of 460
Page 1 of 19 1 2 3 4