Search:

Type: Posts; User: Oze

Page 1 of 20 1 2 3 4

Search: Search took 0.16 seconds.

  1. Replies
    13
    Views
    244

    Re: Sp c430dn black toner bottle not rotating

    Also if ONE pump goes we do all four as a set to future proof having to reattend and do the job again.
  2. Replies
    12
    Views
    313

    Re: MP C4503 toner bottle will not come out

    I've had PLENTY of customers hand me the bottle on arrival.
    They just rip them out and leave the collar behind.
    :rolleyes:
  3. Replies
    19
    Views
    548

    Re: Ricoh MPC 5503 making loud noise

    ;);););)
  4. Re: MPC 2800 showing restart when power on in the morning, before showing ready

    What does SP5-990-004 logging data say as far as SC codes go?
  5. Replies
    9
    Views
    272

    Re: mp c8002 fusing belt tears

    Also...there are two shoulder screws either side of the fuser that hold the belt unit in.
    If you mistakenly use NON shouldered screws when you rebuild it...you'll shred the belt eventually.
    It puts...
  6. Thread: Ricoh MP C6503 SM?

    by Oze
    Replies
    7
    Views
    421

    Re: Ricoh MP C6503 SM?

    Black charge and cleaning assy should take you around 30 mins all up....I did one yesterday :)
    Sux when you have to do the whole set...just time consuming but the job itself is pretty simple.
    As...
  7. Replies
    8
    Views
    315

    [Misc] Re: SP 8400DN pages with vertical crease

    The "Toner" at the top and bottom of pages sounds like the pcdu needs changing...unrelated to your original issue.
    As I said before...on single sided printing check whether or not there is printing...
  8. Replies
    8
    Views
    315

    [Misc] Re: SP 8400DN pages with vertical crease

    With creasing...you need to gently pull the crease apart to see whether or not there is printing inside the crease.
    If there is then the creasing is from the fuser.
    If there is blank areas with no...
  9. Replies
    31
    Views
    1,067

    Re: c3002 "add toner" new developerbox

    It could also be the pump Slim.
    I turn off end detect and see if the toner supply is affected...pale copies usually mean the pump is shot on these old beasts.
  10. Replies
    10
    Views
    780

    Re: JAVA FIRMWARE VERSION

    AND RIGHT THERE IS THE DUMBEST ANSWER EVER..!!!!
    He asked if you were using _upd or _edc :rolleyes:
  11. Thread: IMC2000

    by Oze
    Replies
    5
    Views
    292

    Re: IMC2000

    George is clearly just winding us up again...this is the FIRST result when you ask Google:
    45650
  12. Replies
    3
    Views
    251

    Re: Ricoh Aficio mp c5000

    If the machine has a fax unit then remove this and test.
    I've had a faulty fax option cause this on that model before.
    Unplug the HDD and see if the machine boots up.
    From the manual:...
  13. Thread: af 2035

    by Oze
    Replies
    9
    Views
    322

    Re: af 2035

    Gab :rolleyes:
    Do you mean you can't connect for printing or for scan to folder?
    Coz if it's the latter you can't get firmware anymore so it'll never scan...you'd have to FTP that.
    Maybe try an...
  14. Replies
    12
    Views
    588

    Re: Ricoh CL3000 Color PCU Unit leaking?

    I agree...no way this was shipped from Ricoh.
    Don't buy Craigslist parts people :p
  15. Replies
    15
    Views
    805

    Re: Ricoh MP C3001 trnafer case jams opening door

    No real adjustments as such no.
    The transfer case flexes forward on those two springs and they then compress once the door is closed and that's it.
  16. Replies
    15
    Views
    805

    Re: Ricoh MP C3001 trnafer case jams opening door

    The guide will APPEAR to look complete but there is a tiny lip at the very top that snaps off.
    This acts as a stopper to stop the roller slipping too far.
    When you change them compare the new to...
  17. Replies
    15
    Views
    805

    Re: Ricoh MP C3001 trnafer case jams opening door

    THAT'S because when you initially diagnosed the fault you missed the machine side front and rear guides that guide the transfer roller into it's proper position.
    When they break the transfer roller...
  18. Replies
    5
    Views
    467

    Mpc4503 itb running off to the rear

    Hey all,
    I have an MPC4503 that keeps running the transfer belt off to the rear and shredding it.
    The itb assy has been replaced twice and each time I've inspected the assy to make sure that...
  19. Replies
    4
    Views
    395

    [Misc] Re: IMC 3000 and MPC3000 machine comparison

    Thanks for this post...it's nice to have a laugh in these shitty times ;)
  20. Replies
    20
    Views
    663

    [Error Code] Re: Ricoh MP C4500 SC202

    Wow..for a second there I thought this was a 10 year old thread. :eek:
    A quick look at Google would have lead you back here anyway....it's an old machine with a common fault.
    As Hadster said...make...
  21. Replies
    12
    Views
    651

    Re: Ricoh C4503 SC670-01

    Was it a new IOB or a used one from a donor machine?
    I had this on a recent machine after swapping the IOB with one from a donor.
    Went to a 3rd machine and used THAT IOB and it fixed my SC670-01.
  22. Replies
    15
    Views
    848

    Re: sc442/sc370-02 MPC4503

    i DID wonder if the resolution would be missed :p
  23. Replies
    15
    Views
    848

    Re: sc442/sc370-02 MPC4503

    Thanks for the suggestions guys.
    Somebody mentioned the toner bottle cover being misaligned and causing an issue with the seating of the ITB.
    I checked that cover and it's certainly not sitting...
  24. Replies
    15
    Views
    848

    Re: sc442/sc370-02 MPC4503

    The mainframe...running from the sensor to the IOB.
  25. Replies
    15
    Views
    848

    Re: sc442/sc370-02 MPC4503

    I've swapped that AND the harness Slim.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4