Search:

Type: Posts; User: autopilot

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. Re: FS-C8020 F24C fault > Firmware update source?

    I have come across this on a few devices recently - different older models Utax 206ci (same model as the FS-C8020 I Think) and M2535DN both on current FW.

    I'm not sure if this has been caused by...
  2. [Electrical] Oki mc853 - board replacement - maintenance utility - help

    Firstly I hope you are all keeping safe and well, both in health and finances.

    I am looking for advice on main board replacement for the OKi MC853. We dropped Oki as a partner years ago and I...
  3. Replies
    8
    Views
    1,779

    5551ci - Error Occurred at Cassette

    Hi Folks - I'm having an issue with a few of these machines showing up "Error Occurred at Cassette" - I have come across it before and as resolving the issue is normally just a case of opening and...
  4. Replies
    10
    Views
    2,464

    Re: task alfa 4551ci pcl xl errors

    Agreement with most of the suggestions above:

    Upgrade FW
    Use most up to date version of KX
    Switch KX to PCL5 (haven't actually needed to do this much on newer versions of the driver)

    If this...
  5. Replies
    4
    Views
    9,742

    Re: Bizhub C554e - Internal Error has occurred

    Hmmm, sound advice but may have already done this :eek: ...be on the lookout for thread on reinstalling animations if I get this thing going.

    Will try vacuuming out the hopper first. If I can...
  6. Replies
    4
    Views
    9,742

    Bizhub C554e - Internal Error has occurred

    Firstly, we have been solely Kyocera for quite a few years and haven't worked on any Konica boxes since the old c250 so be gentle.

    We have inherited a few C554e models, one of which has started...
  7. Replies
    5
    Views
    4,167

    Re: Service tracking software

    Would also be interested to know what others are using for this and rough cost on the miracle software.

    So far have I have looked at:

    - Loc8
    - JobLogic
    - Fergus
    - RepairTrackr
    - SysAid
  8. Replies
    1
    Views
    475

    [Misc] Print to Email via Pop

    Just wondering if it is possible to print the actual email text via pop on recent Kyocera machines?

    I can get them to print pdf attachments etc but not the actual email body text, they just seem...
  9. Thread: F248

    by autopilot
    Replies
    20
    Views
    8,428

    Re: F248

    Had this recently on Taskalfa 3051ci. Customer with about 10 Macs and 1 Windows PC. Machine has been working fine for past 2 years or so. Most of the issues seemed to come from Office for Mac...
  10. [CQ] Re: 6052ci Colour Tone Drift on Long Print Runs

    Thanks for the help. I have already set calibration cycle so will try U325 as it seems most likely to cure the problem.

    38431

    There seems to be 10 mode settings so I will just leave it set to...
  11. Re: Kyocera taskalfa will not scan to folder on Windows 10

    Another thing to check is that windows has the network set to Private (Home or Work) and not Public. Seems obvious but if all other settings are correct and it's still not working it's worth...
  12. [CQ] 6052ci Colour Tone Drift on Long Print Runs

    Hi

    Having a few colour issues on this box and wondering if anyone has come across it or something similar.

    Machine setup all done correctly. Colour table was changed to most suitable for the...
  13. Replies
    26
    Views
    6,235

    Re: 3051ci colors very inaccurate

    If you could you forward me any documentation you have specifically on the colour tables it would be much appreciated. The service manual doesn't go into it in any detail.

    I was under the...
  14. Replies
    26
    Views
    6,235

    Re: 3051ci colors very inaccurate

    I think the colour reproduction settings in the driver override the colour table set in the maintenance mode so if you want to see the difference in these you need to leave the driver set to printer...
  15. Replies
    4
    Views
    2,113

    [Misc] Re: TaskAlfa 3010i AirPrint

    I've had a few issues with BT Routers set to Smart Chanel switching.

    If they are on the same network, airprint is enabled on the printer and it still can't be found try looking into this. I've had...
  16. Replies
    8
    Views
    1,390

    [Misc] Re: Fs 1135 dp not feeding originals at times

    Sorry, it would seem I didn't read that very well. We have been having a different problem.
  17. Re: Kyocera 2551ci / Utax 2500ci - Full Colour Bars on Prints

    It was jamming in the fuser because the paper they were using was curling badly with the amount of toner. I haven't actually seen any C codes on screen.

    I will swap out the devs and see if it...
  18. Replies
    8
    Views
    1,390

    [Misc] Re: Fs 1135 dp not feeding originals at times

    It was the clutch that drives the paper feed apparently.

    He has flushed them out and it seems to solve the problem, better job might be to replace it.
  19. Replies
    8
    Views
    1,390

    [Misc] Re: Fs 1135 dp not feeding originals at times

    We have had exact same intermittent problem on a few of these which we didn't have on the older version of the DP

    I'm not even sure if we got to the bottom of this but I'll check with the tech...
  20. Kyocera 2551ci / Utax 2500ci - Full Colour Bars on Prints

    25360

    We have a 2500ci which is a Kyocera 2551ci.

    The machine had only been out at customer for about a week and it started to print colour bands across the page as in above attachment....
  21. Replies
    5
    Views
    876

    Re: Utax machines

    Some of the very old boxes may have been other manufacturers but it's pretty much all Kyocera now.

    I wouldn't have enough experience with Ricoh to do a direct comparison but we have been a Utax...
  22. Replies
    7
    Views
    1,337

    Re: Kyocera Fax Woes

    Sorted

    They had a BT Redcare alarm system operating on the same line, the Recare site mentions a Modem Compatibility Device that should be used with fax machines on the same line but when I spoke...
  23. Replies
    7
    Views
    1,337

    Re: Kyocera Fax Woes

    Thanks for the suggestions,

    I'm using the 2 pin cable,

    I blindly tried changing most of the settings, including taking off ECM but I don't think that changing the exchange to PBX was one of...
  24. Replies
    7
    Views
    1,337

    Kyocera Fax Woes

    Firstly, the majority of the machines that we supply do not have/use a fax system as it is becoming less and less of a requirement with most of our users.

    Of those that we do install with a fax...
  25. Replies
    17
    Views
    3,246

    Re: Firmware problem

    Oh, and thanks :cool:
Results 1 to 25 of 60
Page 1 of 3 1 2 3