Search:

Type: Posts; User: billmcwho

Search: Search took 0.01 seconds.

  1. Replies
    3
    Views
    214

    toshiba 5055c

    rebuilding a fuser and there is a woven nylon pad that is really mangled. has anyone rebuilt one of these and just removed the pad?
  2. Replies
    4
    Views
    332

    kyocera 2540dw

    getting jams out of the fuser, machine has about 120K. get a 4211 code. pulled the fuser cleaned the sensor (had very little dust) Is there a way to check the sensor without replacing it? The press...
  3. Replies
    3
    Views
    401

    Re: panasonic DP c405 panel calibration

    thanks for the info!!!
  4. Replies
    3
    Views
    401

    panasonic DP c405 panel calibration

    what is the procedure to calibrate the panel. TIA Bill
  5. Replies
    6
    Views
    433

    Re: toshiba 4540c pulling developer

    Thanks for all the input!!!! doing the 03/235 the back half of the LED was not lighting. replaced it and now getting a better look at the old assembly R3 is fried.
    one more question is why did this...
  6. Replies
    4
    Views
    280

    Re: Toshiba 282 firmware update error

    I lost power during a firmware update on this model and it blew out my system board!
  7. Replies
    6
    Views
    433

    toshiba 4540c pulling developer

    I replaced a black dev unit on this machine at 467K. drum was shot and copies were streaked and spotted. I will admit i cheated by replacing it with a low count black unit from another machine. That...
  8. Replies
    4
    Views
    301

    Re: 2540 adding toner

    I did enter the 10871087 and set 130. when you say it will take a really long time, are you suggesting just let it run? from the feel of the toner it has taken close to 1/3 of a new cartridge.
  9. Replies
    4
    Views
    301

    2540 adding toner

    replaced the maintenance kit and now machine just keeps adding toner. Must of done something wrong was working prior.
  10. Replies
    10
    Views
    1,408

    Re: Toshiba E-studio 3508A Firmware

    new to the forum,I am also in need of the 3508a firmware. Its actually a 5008a. Lost my access to the toshiba fyi site. Any help would be appreciated. TIA Bill
Results 1 to 10 of 10