Search:

Type: Posts; User: tech07

Page 1 of 15 1 2 3 4

Search: Search took 0.36 seconds.

  1. Replies
    2
    Views
    277

    [Electrical] M525 Document Feeder

    Saw my first M525 today. Put paper in the top feeder but the green paper present sensor never comes on. So obviously, it scans from the glass instead.
    Didn't see individual parts, so I ordered a new...
  2. Re: Kyocera TA-3551ci showing memory full when scanning

    I've been able to resole a couple by switching to KX driver.
  3. Re: Kyocera TA-3551ci showing memory full when scanning

    Change the print driver. Really.
  4. Replies
    2
    Views
    288

    Pass thru/pinch rollers/240.xx jams

    Techs. I have 3 printers with pass thru roller issues. 2 xc6152 and today a 8160. when paper is fed from tray 3, it jams at the pass thru/pinch rollers of tray 2. As though the rollers dont even...
  5. Thread: The 70's

    by tech07
    Replies
    99
    Views
    10,832

    Re: The 70's

    My first ......THE IRON BUTTERFLY
    2nd............LED ZEPPLIN
  6. Thread: XC6152 Jam code

    by tech07
    Replies
    4
    Views
    578

    [Error Code] Re: XC6152 Jam code

    What's Google ?
  7. Thread: XC6152 Jam code

    by tech07
    Replies
    4
    Views
    578

    [Error Code] Re: XC6152 Jam code

    Come on BC . Chill.
    I have the service manual.
    240.26 is there.
    No letter info
    I assuming it's a door.
    Not a life or death matter.
    Thanks anyway
  8. Thread: XC6152 Jam code

    by tech07
    Replies
    4
    Views
    578

    [Error Code] XC6152 Jam code

    Had a lexmark xc6152 today that had jam code 240.26c
    What does the c mean ?
    Have not seen this before
  9. Re: kyocera taskalfa 3550ci - black dots in the prints

    Drum charger rollers for sure
  10. Replies
    10
    Views
    1,590

    Re: TASKalfa 406ci toner smudge

    Install a new transfer belt. Had a few of these
  11. Replies
    2
    Views
    412

    Re: HP M3035 INVAlid NVRAM

    I get it.
    I work for a large company. They do not recognize pcb component repair. If something on the board is bad, it gets a new board.
    Not my call.
    Also, I do not know where they order their...
  12. Replies
    2
    Views
    412

    HP M3035 INVAlid NVRAM

    Gotta reach out to seasoned HP techs
    Had a battery error on an M3035. Since it's soldered in, I ordered a new formatter board.
    New board is giving a " INVALID NVRAM " error. Put the old board back...
  13. [Dead] Re: Estudio 3055C Cycling on and off also F 101 Error (How can I get Firmware)

    From experience...Replace HDD most likely
  14. Replies
    2
    Views
    269

    [Dead] Re: Toshiba e-Studio 347cs won't power on.

    From experience.....Replace power supply
  15. Replies
    10
    Views
    889

    Re: Kyocera 5500/5501 dark pages

    Please provide sample pictures
  16. Replies
    63
    Views
    37,844

    Poll: Re: How many brands are you expected to be good at?

    Literally..Everything except xerox
  17. Thread: KM-C2525E

    by tech07
    Replies
    3
    Views
    786

    [Error Code] Re: KM-C2525E

    Thumbs up gentlemen
  18. Thread: HP M477

    by tech07
    Replies
    3
    Views
    850

    [CQ] Re: HP M477

    Genuine
  19. Thread: HP M477

    by tech07
    Replies
    3
    Views
    850

    [CQ] HP M477

    This printer has bout 70k prints.
    It prints light about 3-4 inches down the right side of page.
    Not blank but defininately lite
    Experienced tech but first I've seen on this model
    I have replaced...
  20. Thread: KM-C2525E

    by tech07
    Replies
    3
    Views
    786

    [Error Code] KM-C2525E

    Getting a C0640 HDD error on this machine.
    Problem is finding a replacement HDD 40G
    Question is ...Has anyone used a generic one ? If so, what ?
    I do have a kyocera 160G HDD. Could this possibly...
  21. [Misc] Re: Kyocera Taskalfa 2551 back of the printed sheet is dirty

    For everyone's benefit, please post the solution for this issue when resolved. It helps all of us.
  22. [Misc] Re: Kyocera Taskalfa 2551 back of the printed sheet is dirty

    I'd go with a new transfer belt also
  23. Replies
    1
    Views
    2,554

    Re: M5155 jam 203.22

    It was the redrive motor
  24. Replies
    1
    Views
    2,554

    M5155 jam 203.22

    Not familiar with these but inherited one. M5155. Getting a jam 203.22
    Says that is some type of redrive jam but paper actually doesn't make it out of the cassette all the way.
    I also hear a short...
  25. Replies
    55
    Views
    27,881

    Poll: Re: What age group are you in?

    65.....I rock . other techs in my company can't touch me...
Results 1 to 25 of 356
Page 1 of 15 1 2 3 4