Search:

I have to be honest. Lately it will be about 3-4 months that I have not uninstalled the Marketplace.
In series 8 (now out of production) it was necessary to enter the administrator password and...

Hi, I had read that thread but I could not understand what he means. Perhaps the translation is deceiving me.
Thank you my friend :)

Hi, I replaced the fuser and the noise disappeared.
The energy saving was on 60 minutes/60 minutes. This is definitely not very healthy. So I inserted the cable for the fix of the random ignition +...

Hi, I have a FS-533 finisher with an error 1102. It is about raising and lowering the output tray. The tray locks up and does not want to go down. The only way to reset it is to lower the tray...

On a bizhub 458 I once tried to disassemble but I realized that the three screws were not fixed. Perhaps the heat of the oven has dilated the holes and could be removed without unscrewing them.
...

The problem is almost undoubtedly the USB stick. When you start an update, after the black dot in the top right comes out, the firmware starts after 2-3 minutes.


If not, the printer should boot...

I would like it too but I realized it is unprofessional. This summer at 30°C with long pants. Then on the air conditioning van to 100% hahahaha

I thought it was a reminder for the main one. But in reality they are completely different. I believe they are used to block/enable certain information/functions to CSRC. But currently, I have never...

Hi, try to check if the cartridge is mounted correctly

With that counter, at least once you should have changed all the drums. It really depends on if you have printed a lot of color.
The signs do not seem continuous, it could also be the transfer belt.

Hi, I have tested on a bizhub 308.
However, the Service Mode closed after entering the reboot link. The printer did not restart. I miss something?thank you bro

Ok ... Bix read the manual: ip + /csrc_index.html

hi, I forgot how to configure the csrc via web browser. I remembered this possibility by typing the IP of the printer and the URL parameters.
Does anyone remember? Thanks!

This is interesting. I have found it easy to replace the toner bottle cap. So theoretically they are doing this just to get money spent on new toners? I hope there is a difference.

How do you go about dividing the developer from the toner? With a magnet?

This news will come to commercials

What you say is correct. In case of an initialization, it will be necessary to insert the PDF/A font file. It would be nice if one day this information could be downloaded independently, as almost...

Hi, good news for iSeries. Now the LK-102 option is free and you won't need to purchase it. In fact it is sufficient to upgrade to G00-E9.
For the 8 series instead it remains to be paid.

Hi, when does this error happen? Immediately or after a few minutes? I have had some FA14 connected to a bad control pannel

It often happens to me that the toner is almost finished when it is actually full or vice versa. I wait for the printer to stop due to low toner, remove and reinsert the toner tube to return to 100.

Hi, I have had a similar problem. Never trust HDDs.
I had also tried replacing it with a HDD used by a high printer. I solved it just by changing to a new one.

Hi guys, I have encountered a problem firmware bug on a bizhub C3320i. I don't know if it's actually a bug or a printer problem.
The printer arrived with recent G00-B6 firmware from the factory. It...

Hi guys, thanks for this additional advice. I could try a load check.
In this case, are there any skills or should you replace the entire paper exit output unit?

True, good idea. This printers maybe have problems with standby. I will have to check if it pauses, perhaps that is the reason for the deterioration of the fuser.

I didn't do anything. I just wanted to know if anyone has ever heard this kind of noise on the iSeries. On the part list the code has changed but it would not seem to be due to defects. I just did...