Search:

Type: Posts; User: jp74msj55

Page 1 of 4 1 2 3 4

Search: Search took 0.09 seconds.

  1. Replies
    11
    Views
    1,538

    Re: MX-3140 Light Washy Copies (Print/Copy)

    Looks like your Yellow or Magenta developer is depleted to me on your 3rd example.
  2. Replies
    4
    Views
    619

    [CQ] Re: mx4111n light black copies

    Have had this frequently. Put a new DV unit and developer in. Also I have had to put
    a new process unit and drum and maintenance kit at same time. And a new waste container
    at the same time....
  3. Replies
    1
    Views
    544

    Re: MX-M363N Boot issues.

    Hopefully you swapped eproms when doing so.
  4. Re: Looking for sharp mx-2600n transfer belt#1 assembly

    If you buy from Sharp directly about $205.00
  5. Replies
    3
    Views
    483

    Re: MX-3060N Vertical Blue Lines

    Have you tried sim 64-4 and change setting to a 3 for individual colors? To see if on all colors?
  6. Replies
    3
    Views
    408

    Re: MX-7090 / Mx-PE13 Fiery System Software

    Runtime Error
  7. Replies
    3
    Views
    408

    Re: MX-7090 / Mx-PE13 Fiery System Software

    Don't know if this will help you Runtime Error
  8. Replies
    17
    Views
    2,385

    Re: sharp mx 453 light prints and copies

    Make sure your 25-2 value is good when you change developer.
  9. Replies
    9
    Views
    734

    Re: MX B402SC Bypass jams

    I'm guessing PPD1 sensor is bad. Part of paper feed 1 unit. Seen it before.
  10. Thread: Doc feeder

    by jp74msj55
    Replies
    7
    Views
    723

    [Misc] Re: Doc feeder

    I had a similiar problem on an 4110N. Turned out to be sensor. First one when in DF tray size detect. Good luck.
  11. Re: customer called with MX3070 with error H2-03

    Tech pub about thermistor holder being to far away from belt. New plastic holder for thermistors if you are rebuilding them.
  12. Replies
    3
    Views
    517

    Re: Learning to follow directions!

    Wow the 760 was a filthy animal!!!!
  13. Thread: MX-M5140

    by jp74msj55
    Replies
    4
    Views
    375

    [Misc] Re: MX-M5140

    If they are anything like a MX-4110 they come out easily. You don't even have to take out laser unit.
    I just pulled mine right off from inside the unit itself. Not sure if same. Good luck!!!!
  14. Replies
    13
    Views
    1,735

    Re: MX-503 multi sheet feeding

    I agree. Just put one sheet in each drawer and see if it jams. Then check 23-2 for jam code.
  15. Thread: Sharp 264n

    by jp74msj55
    Replies
    2
    Views
    421

    Re: Sharp 264n

    What jam code you getting? That would be helpful to everyone.
  16. Thread: MX-M565

    by jp74msj55
    Replies
    4
    Views
    864

    Re: MX-M565

    Run sim code 23-2 to see history of jams and trouble codes.
  17. Replies
    2
    Views
    707

    Re: mx6240n l4-06 error

    Page 39 in S/M shows sensors if that helps. I agree about part #15 in earlier post.
  18. Replies
    15
    Views
    6,884

    [Error Code] Re: H4-02 on MX-3060/MX-6070/MX-5070

    There was a tech pub about thermistats being to close to Belt. New housing available that moves them slightly back. Here you go.MFP-TB-1677
  19. [CQ] Re: different models, same problem...band new units...

    I've had to replace the follower roller. The one closest to the cleaning blade in past for these tiny staple marks as I call them.
  20. Replies
    13
    Views
    1,735

    Re: MX-503 multi sheet feeding

    My recomendation is to try 1 tray at a time with only 1 sheet of paper. Then try 2 sheets to see if it jams.
    If it jams with 2 sheets, most likely a bad sensor and paper blowing by the sensor. Have...
  21. Re: MXM453N Firmware Update for Security MXFR23U

    You can download on Sharp site. Login Login
  22. Replies
    13
    Views
    1,661

    Re: Blank display on 3050/4070 models.

    SD card? Seen this alot on this site for that issue.
  23. Replies
    3
    Views
    984

    [Misc] Re: MX-C301w Noisy Fuser drive

    I have had 2 of these recently. Delivery drive unit which also drives fuser. Not fun. About 2 2 1/2 hour job and I recommend you bring
    to your office since a pain and try to stay organized. Here is...
  24. Thread: MX-402SC

    by jp74msj55
    Replies
    6
    Views
    1,076

    Re: MX-402SC

    I have had so many of these at one of my large accounts. Paper detect sensors in Paper feed unit 1 are bad. Here is part number and change both sensors as a pair. # VHPGP1A73A+-18. Takes about 15...
  25. Replies
    6
    Views
    890

    Re: Sharp MX B402sc Fuser part

    Here is kit for heater rollers. MX-B42HK You save about $62 for rebuild kits. Takes me about 35 minutes to rebuild one.
Results 1 to 25 of 85
Page 1 of 4 1 2 3 4