Search:

Type: Posts; User: mc8305

Search: Search took 0.07 seconds.

  1. Replies
    1
    Views
    451

    PerfectBinder B1 error: E5B2-0004-61

    Second error on this "new" install :)

    On start up the PerfectBinder B1 gives us code: E5B2-0004-61
    Abnormal adjustment value of the level thermistor (S58) has been detected

    Any hints?
    Where...
  2. Replies
    9
    Views
    444

    Re: New install IPC6010 error E866-202-11

    Thanks to both fchu5959 and Teckat for excellent advice!

    It ended up being the j7969 connector I apparently didn't check it properly the first time... now pushed all the way in and POD deck online...
  3. Replies
    9
    Views
    444

    Re: New install IPC6010 error E866-202-11

    New Update:
    Tried to swap all drawer related prints between the lower and middle drawer to see if the error code moved.. Nothing changed. :(
    Connected another POD-A1 paper deck and got the same...
  4. Replies
    9
    Views
    444

    Re: New install IPC6010 error E866-202-11

    Thanks!
    Checked all connections, but found no problems, still the same :(

    Any other hints before i start to swap prints?
  5. Replies
    9
    Views
    444

    New install IPC6010 error E866-202-11

    As subject says. We mostly deal with Xerox and KM kit these days, so i need a little help with this Canon issue.
    New machine to us, decommisioned by Canon, was working at previous location!
    When...
  6. Re: KM C8000 - New 2. transfer unit making a mess..

    You guys are correct.. Did overlook the 2 blue screws at the back.
    Strange, no info on the box instruction and nothing in my service manual..

    The old unit must be a gen 1 it dosen't have this...
  7. KM C8000 - New 2. transfer unit making a mess..

    Just replaced the secondary transfer assembly with a genuine new KM unit..
    now the machine soils the back side of the sheet with no apparent pattern.. it can be ok for 20 sheets - the 10 bad sheets...
  8. Replies
    3
    Views
    867

    Re: Xerox speed and reset counter ?

    The answer for this one is enter: DARUDE SANDSTORM in the service menu, and then hit the green button. :p
  9. Replies
    4
    Views
    636

    Re: C8000 Quality issue

    It ended up being the main unit lower fusing belt/assy
    Sure hope it holds up longer than the 450.000 imps it is rated at?
    The price was 1500 USD!
  10. Replies
    4
    Views
    636

    C8000 Quality issue

    New to us Press C8000, we only experience this issue with 170gsm silk paper. (see picture 170gsm on right 350 gsm on the left)
    On 300 and 350 gsm silk and other paper surfaces we don't get it at...
  11. Freeflow server - print service not starting

    Hi folks,

    I am a Canon/fiery guy that just got a hold on a Xerox Docucoler 250 with a FreeFlow Server 6.0.

    I am totally clueless regarding the freeflow server, and the documentation is not of...
Results 1 to 11 of 11