Search:

But DHCP would not pick a duplicate IP thats one of its main jobs.

Well done, thanks for the update.

Firmware Update - Printer & Copier Firmware

No, see attached.

47964

Trouble Reset.

47965

I've never used a MAC to create a FW USB, if you have access to a Windows PC you could also try that.

If your laptop connects fine then most likely the copier is OK.

Can you wheel the machine & swap it with another copier you say is working fine? This will confirm it's not the wall LAN socket or...

Here's a long shot, leave the firmware in the service slot.

Shut the machine down, must use the power switch inside the front door NOT the one on the control panel.

Hold down the...

Here is the service manual so have a read.

https://mega.nz/file/lQ0kWZTY#cCnN-5vwvK_HqtQW30TeJB6yW5BLafTWIu4DPiD8MgQ

Search for manual add toner. Now see my previous post, take off the inner...

Maybe Phil B should read the manual .......... :cool:

Had this same issue on an x02 series set trays to auto. Bit bizarre not yet resolved with a firmware fix.

Call Xerox support in your country.

2.5" SATA 320GB, however as you know you can pretty much use any size within reason.

Back in the day (late 80's early 90's) it was a suit & tie.

Now I simply wear smart shoes, suit trousers & plain shirt. (no tie)

However IT/Network support dress like a courier driver, usually...

As harsh as this reply is, this will be your best bet rather than wait for a reply, especially if you are in a different time zone.

He posted he is using the service USB slot & he has access to the service manual so I would assume so.

Or if you are an end user any colour fits in any hole apparently!

Bit late now to give advice ........... :cool:

I have always formatted my USB pen drives in Windows & never at an issue before. Others will tell you this is wrong & you should use a 3rd party format software tool.

In my experience try a few...

I had this exact issue a few weeks ago.

The fact that it wont print the demo page you can rule out any network or driver issues.

For me I updated the firmware & the issue was resolved, I think...

There are a few alternatives you can use that may help until Kyocera come back with a permanent solution.

Open source alternatives to Flash Player | Opensource.com.

That document was taken from the service manual, but you may find the 8GB pen works fine.

Konica Minolta don't boot off the HDD, it is purely for storage.

Don't change any of the files or partitions on the HDD you will create even more issues!

Try another USB pen, no larger than...

Thanks for the update.

Ok, but what is the LF counter for the C & K drums?

Clean the patch sensors & replace any the transfer unit, C & K drums if they are near end of life

This is the correct login info.