Search:

Type: Posts; User: CopyTech03

Search: Search took 0.04 seconds.

  1. Replies
    6
    Views
    370

    [Jamming] Kyocera 3253ci False Jam 00

    Has anyone ran into this issue where this machine will give a false jam 00 out of nowhere? For instance you could just finish running a print job, panel shows Ready To Copy, you open and close the...
  2. Replies
    0
    Views
    230

    [Jamming] Tray 1 (MP Tray) Not Feeding

    I have a HP Color MFP 586z where tray 1 (MP tray) is not feeding the paper. The feed assembly drops down, but the rollers do not turn to feed in the paper. Not finding any instructions on how to...
  3. Replies
    1
    Views
    208

    [Error Code] Konica c7000 Error Code C-1272

    Has anyone come across this code before? It refers to the trimmer in the saddle stitch unit. Had the customer run the books without trimming, but it still codes after a few books.
  4. Replies
    2
    Views
    523

    [Misc] Toner Chip Programmer

    Does anyone know where to get a toner chip programmer from? I have a few HP printers that are redesigned as CDK and will only take the CDK cartridges. Wanting to reprogram the chips to use in the HP...
  5. Replies
    1
    Views
    459

    [Misc] Printing Error

    Have a P2040 when trying to print from DocuSign will print the first page only with an error message in the upper corner "ERROR: invalidcontext OFFENDING COMMAND: show STACK: (!). Prints fine using...
  6. Thread: Firmware

    by CopyTech03
    Replies
    2
    Views
    416

    [Misc] Firmware

    I have a customer who has a few CDK (HP) M608 and CDK (HP) M553 printers. These printers have CDK info embedded in the firmware or software so it only wants the CDK brand toners and won't accept the...
  7. Replies
    7
    Views
    556

    [CQ] Re: Ghost Images

    Yes, those come in the fuser MK.
  8. Replies
    7
    Views
    556

    [CQ] Re: Ghost Images

    On this printer the toner is all in one. They are using this as a check printer so it has a MICR cartridge. It's the same cartridge that was in there before the problems started.
  9. Replies
    7
    Views
    556

    [CQ] Re: Ghost Images

    @60% life remaining on the toner cartridge (IU). This particular printer uses the MICR toner cartridge, but was not an issue before that parts were replaced.
  10. Replies
    7
    Views
    556

    [CQ] Ghost Images

    Lexmark T652 reprinting same images on prints. Usually first few prints out. Originally had a fuser error which I replaced the fuser MK and the power supply (root cause). Ghosting problem has been...
  11. Replies
    1
    Views
    313

    [CQ] Lexmark T652 Fuser

    Lexmark T652 putting repeating images on prints (usually first few pages). Fuser is new (was time for MK) and recently replaced power supply for fuser error message. Is there a way to adjust fuser...
  12. Thread: Noise

    by CopyTech03
    Replies
    1
    Views
    385

    [Misc] Noise

    HP MFP 586z has a loud noise when feeding originals through the document feeder. I lubricated the idler roller shafts at the exit and just before the originals reach the scan glass. Has anyone else...
  13. Thread: Firmware

    by CopyTech03
    Replies
    7
    Views
    683

    [Misc] Re: Firmware

    That is current firmware. I need older or original firmware.
  14. Thread: Firmware

    by CopyTech03
    Replies
    7
    Views
    683

    [Misc] Firmware

    Does anyone have access to or can point me in the right direction to get older/original firmware for HP M608 and HP M553?
  15. Replies
    3
    Views
    1,049

    [Jamming] Re: Muratec MFX-2050 String Feeding

    PROBLEM SOLVED - Just in case anyone else runs into this problem it was the feed solenoid on the back of the machine. The plate was staying engaged with the solenoid magnet (residual magnetism). I...
  16. Replies
    3
    Views
    1,049

    [Jamming] Re: Muratec MFX-2050 String Feeding

    It just says check paper size. The copy/print is halfway out the machine (trail edge just out the fuser) and the blank sheet is right behind it which is causing the jam indication.
  17. Replies
    3
    Views
    1,049

    [Jamming] Muratec MFX-2050 String Feeding

    Muratec MFX-2050 will pull 2 sheets one behind the other, like the clutch isn't turning off. Doesn't do it all the time. Replaced the feed roller, sep pad, clutch, and sensor. Anyone else run across...
  18. Replies
    1
    Views
    330

    [Misc] Part Numbers

    Does anyone have the part numbers for the developing unit shaft holders (bushings) for the Konica Minolta C7000?
  19. Replies
    2
    Views
    254

    [Jamming] Re: Bizhub c650 Duplex Jams

    Usually starts with j93-01 then will be j32-01 after that, but always jams in the same spot
  20. Replies
    2
    Views
    254

    [Jamming] Bizhub c650 Duplex Jams

    Jamming when entering Duplex unit at upper duplex switch. Swapped out duplex unit which rules out sensors and motor (motor is not coming on). My next guess would be replacing the PRCB. Has anyone...
  21. Replies
    4
    Views
    591

    Re: 4501i voip fax?

    There is a bulletin that outlines which settings to adjust for each machine using VoIP
Results 1 to 21 of 21