Search:

Type: Posts; User: blackcat4866

Page 1 of 20 1 2 3 4

Search: Search took 0.25 seconds.

  1. Re: "But faxing is the only thing hippa compliant" whine

    Yeah, I had a Konica Minolta at a retirement home. The nurses would peel the pharmacy labels off of the bottle and stick them on a 3 3/4" x 7" form, then try to fax it somewhere through the DF. They...
  2. Thread: 49.38.0d

    by blackcat4866
    Replies
    5
    Views
    157

    [Error Code] Re: 49.38.0d

    That's not good.

    Try firmware, if it will take. =^..^=
  3. Replies
    2
    Views
    145

    Re: Disable HM-102 in RU-509?

    I haven't installed or served one of these humidifiers, but I think, I'd follow the installation instructions in reverse, and un-install the HM102.

    My only concern is that in the installation...
  4. Thread: 49.38.0d

    by blackcat4866
    Replies
    5
    Views
    157

    [Error Code] Re: 49.38.0d

    I'd start by taking it off the network, booting up, then testing while off the network. If the error does not re-occur off the network, you may have a corrupt print job, wrong print driver, or...
  5. Re: estudio 2555c What are these yellow lines?

    Yeah, I cleared some space. Message when you're ready.
  6. Replies
    16
    Views
    655

    Re: Slow wifi printing C659

    How about a USB print server? =^..^=
  7. Replies
    2
    Views
    162

    Re: FULL BLEED ON HP DJ800?

    Cut off the blank area. =^..^=
  8. Replies
    4
    Views
    261

    Re: BH-4050, mono MFP, cassettes

    Yeah, I don't think the machine will accept extra trays beyond the specs. If you're loading that much paper into a "tabletop" MFP (even though it's 1 1/2 meters tall now), I think you undersold the...
  9. Replies
    9
    Views
    385

    [Jamming] Re: PC417 Jams C650i

    I think I'd focus on PS152, PS153, & PS158.

    I know it's a little different, but I came across these jams on a 654e. What I found on the 654e was that PS21 (equivalent to PS153 on your machine) the...
  10. Replies
    5
    Views
    226

    Re: TA8353ci Belt Initialize error 33

    If you re-install the old belt unit, does it pass the initialization? =^..^=
  11. Thread: f110

    by blackcat4866
    Replies
    2
    Views
    152

    Poll: [Error Code] Re: f110

    F110 is lack of communication between the scanner PWB and the system PWB. If the scanner board has been replaced, then all that leaves is the system board and a few feet of wire harness.

    I would...
  12. Replies
    3
    Views
    198

    Re: What to do in your free time?

    ... or you could spam this forum. =^..^=
  13. Replies
    2
    Views
    175

    Re: toshiba e studio400ac setup

    Try: #1048#

    =^..^=
  14. Replies
    3
    Views
    182

    [Misc] Re: HP DesignJet T1200

    I think I'd examine, and possibly clean the encoder strip. Ink on the encoder strip can cause this effect. A sticky carriage rail can also cause this effect.

    The encoder strip is a silk-screened...
  15. Replies
    8
    Views
    396

    Re: Service Vac suggestion.

    LOL! I had the C13/NEMA 5-15 cable start to spark, then smoke, then shot out cool green flames from the side of the connector. To be perfectly honest that cord had been jammed in and out of that...
  16. Re: C454e paper exiting onto the conveyance

    Perhaps you've got a print driver incorrectly configured (doesn't show the bridge & finisher)? =^..^=
  17. Replies
    12
    Views
    573

    Re: Kyocera M3540idn Jam 501

    Is the pickup spring still there? Often that spring disappears ... especially after a roller change. =^..^=
  18. Thread: 4002i

    by blackcat4866
    Replies
    27
    Views
    1,296

    Re: 4002i

    We used to do something similar on the Canon analog devices. It was relatively common to get failures of the drum potential sensor, producing a wide variety of quality issues. Turning OFF drum...
  19. Replies
    7
    Views
    243

    Re: How do we upload photos to the site?

    A better solution is to lower the resolution on your phone camera. Typically the forum will take images <1MB. Most newer phone cameras produce significantly larger images. =^..^=
  20. Replies
    27
    Views
    1,261

    Re: resignation Mark Bbb

    You'll be missed. What's next for you? =^..^=
  21. Re: Lexmark MS810 intermittent blue screen/firmware error

    How about the thing that drive Copytechnet newbies crazy?:

    Add "print" to the end of the weblink to get a printable view. =^..^=
  22. Re: Lexmark MS810 intermittent blue screen/firmware error

    As long as they pay the bill, that's fine.

    When possible, watch for a button "View as PDF", "Printable View", or "Download as PDF". That flattens the image, so that any embedded web links do not...
  23. Replies
    7
    Views
    341

    Re: Toshiba e-studio 163

    Yeah, the Sharp Panther or Toshiba Chang Jiang wasn't much of a copier to start with. I think they were the first machines that we called "Jammomatics". =^..^=
  24. Replies
    7
    Views
    341

    Re: Toshiba e-studio 163

    Like what? =^..^=
  25. Replies
    4
    Views
    152

    Re: Kip 7170 controller, need to buy

    If you can find a new one, it's $2K to $3K, and you'll still need the license codes to make it do anything. And Kip has been remarkably unhelpful. My prediction is that you'll struggle for a while,...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4