Search:

Type: Posts; User: JR2ALTA

Page 1 of 20 1 2 3 4

Search: Search took 0.38 seconds.

  1. Re: FS-C8020 F24C fault > Firmware update source?

    Delete the print job from the source computer or server. Avoid printing from internet.

    Or

    Some f-codes are corrupt fax data. Get into simulations and clear fax memory.
  2. Replies
    3
    Views
    239

    Re: 300ci , 3101 code on scan to e-mail

    Make sure you have the "from" or "machine address" filled out.
  3. Replies
    3
    Views
    289

    Re: bizhub 808, misfeeds only dark originals

    I have seen pre-printed paper (church bulletin) with lots of heavy fill jam in a bridge unit once. I chocked it up to the rollers not gripping. But your theory may have been true culprit.
  4. Re: Watching "Tech" video on Youtube FSC Drum Problem... Grease transferred to OP

    WTF he didn't even fix it. At the end it's still not cleaning.
  5. Re: Kyocera 3050ci and 3551ci Magenta problems

    Unfortunately you can't get help here with compatible toner. It's not your fault but it's too big a red flag for us to waste time on.
  6. Replies
    11
    Views
    332

    Re: Search Error Codes

    a google trick is

    site:copytechnet.com "search for code in these quotes but you don't need the quotation marks"
  7. Replies
    5
    Views
    317

    Re: MX6070N ghosting on black / lines

    Definetly junky fusers....but make sure you customer didn't get tricked into buying pirated toner.
  8. Replies
    6
    Views
    568

    Re: 4052ci Strange inner finisher issue.

    The arms (as they were visible) seemed OK but they didn't move smoothly. I took off tray, front and side covers to find the whole actuator ass'y was off on the rear side. Fixed and the "paper full"...
  9. Replies
    80
    Views
    2,995

    Re: Moderator desperately needed!

    We don't need a freaking moderator. We're all demographically the same middle-age, mature, American guys. We can handle ourselves.

    Like everyone else says ignore the bullshit. If we get spammed...
  10. Replies
    11
    Views
    652

    [Error Code] Re: 5003i f010 code

    Outstanding help. This is what makes the site great.

    Tech support will run you in circles (maybe they should make it easier to close your tickets! get rid of I.E only portal!!!)
  11. Replies
    1
    Views
    328

    Re: Xerox pws tool download for free

    Fuk Xerox
  12. Replies
    5
    Views
    397

    Re: kyocera 5501i technician questions

    Maybe you're just curious and I respect that, but I mean the difference in speed doesn't matter. Both are plenty fast and you got it up and running. Cheers.
  13. Replies
    6
    Views
    568

    Re: 4052ci Strange inner finisher issue.

    Well, lol, that extender was installed. But that didn't fix it. It was the paper pressure actuator being out of place. It those 5 or 6 arms that fall fowards onto the paper on the exit tray. I guess...
  14. [Error Code] Re: Kyocera FS-2026MFP "Toner Cartridge Improperly Installed"

    Burned me too, my friend. But in the end they all get fixed.
  15. [Error Code] Re: Kyocera FS-2026MFP "Toner Cartridge Improperly Installed"

    My favorite part is not being able to test your work until you spend 90 minutes reinstalling everything.
  16. Replies
    7
    Views
    583

    Re: ECOSYS M2040dn - knocking noise

    It's the fuser. The noise echoes throughout the machine. I thought it was paper lift, then drum/dev. First time I saw it I turned the fuser by hand and it seeemed fine and after re-installing it...
  17. [Error Code] Re: Kyocera FS-2026MFP "Toner Cartridge Improperly Installed"

    Hopefully it's just this dumb fix. Check all the colors.
  18. Replies
    6
    Views
    568

    4052ci Strange inner finisher issue.

    I have an inner finisher DF-7110 exits one sheet the exit tray lowers to bottom position. Message "main unit inner tray full of paper". I guess I went off half-cocked and ordered the finisher upper...
  19. Replies
    9
    Views
    590

    Re: Sharp MX B402 /PRIMARY TRANSFER UNIT

    Well, sure if you're belt is bad I'd advise to just get a new one.

    But I recall something regarding this model and blank copies. The laser shutter not being engaged. Because even with a bad belt...
  20. Replies
    5
    Views
    432

    Re: 2640dw crooked skewed scans

    You're a better man than me. If the manual doesn't offer skew adjustment I tell the customer (in so many words) you get what you pay for. This is a desktop MFP, nothing I can do.
  21. Replies
    9
    Views
    590

    Re: Sharp MX B402 /PRIMARY TRANSFER UNIT

    Damn, this will drive crazy. I think it has something to do with the waste bottle engaging a doohickey. Maybe even in a bulletin. I'll check.
  22. Re: M3540idn part identification (tray size sensor)

    I dunno, maybe that's just the front door switch. Your best bet is to get a hold of the Dallas Parts Department.
  23. Re: M3540idn part identification (tray size sensor)

    My FS2100/4200 manual has 7SP03072001+H01 as the likely canidate.
  24. Replies
    6
    Views
    827

    Re: Kyocera Furloughs

    Kyocera has very few branches or direct employees. Like you said, I'd be curious about Konica or Ricoh which has a ton of techs.
  25. Re: Anyone using cordless screw drivers for field work?

    I am not a "routine" kinda guy I could see myself with an uncharged driver half the time. Plus there are many screws that cannot be accessed without a long, traditional driver.

    I also don't like...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4