Search:

Type: Posts; User: Synthohol

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Replies
    5
    Views
    1,454

    Re: Looking for bootscreen converter

    Check your pms
  2. Re: Print quality issue when printing pdf from thumb drive(Bizhub C458)

    If it's a pdf I know this sounds silly but from the computer, print the pdf to a pdf printer and try printing the new saved version.
    See if it's better.
    I've had files where the pdf had too much...
  3. Replies
    10
    Views
    381

    Re: bizhub C250i foggy backgroud printout

    before all that, try just simply calibrating it like i suggested above.
  4. Replies
    10
    Views
    381

    Re: bizhub C250i foggy backgroud printout

    i dont see anything wrong.
    you can always reset and stabilize then do the gradations 3 times each and see if it changes but frankly, im missing where the problem is.
  5. Replies
    6
    Views
    357

    [Misc] Re: Bizhub C454e not printing correct.

    Looks like a 2-fold problem. You have a smear line across all colors. This could be a fuser entrance debris or under the transfer belt right before it goes vertical. Maybe a mylar or a stuck label...
  6. Replies
    3
    Views
    188

    [Misc] Re: AccurioPress C6085 Main Exit Tray

    Probably a bit switch setting.
  7. Replies
    11
    Views
    620

    Re: Finisher disappeared

    ^^^^^^^^^^+1^^^^^^^^
  8. Replies
    13
    Views
    552

    Re: Konica Plotters?

    KM offers KIP as their plotter solution.
  9. Replies
    3
    Views
    174

    Re: Konica C8000 press finisher problem

    The best advice is to look up the jam code.
  10. Replies
    22
    Views
    665

    Re: C6100 P/N for wheels

    harbor freight, home depot, lots of places to get new castors.
    even the bottom of a dolly has good castors.
    better yet, grainger.
    castor wheel heavy duty products - Grainger Industrial Supply
    i...
  11. Replies
    22
    Views
    665

    Re: C6100 P/N for wheels

    i think he means the ones that support the machine.
    front and back are different #s
  12. Replies
    5
    Views
    235

    Re: bizhub 420, duplex problem

    10+ red cards Phil, why even bother responding?
  13. [Misc] Re: Problem when print front and rear in A3 paper

    stop the print at different intervals and see WHEN the crease occurs.
  14. Replies
    25
    Views
    1,040

    Re: Can't update firmware BH C458

    what size are the drives?
    usually 8G is the max size. a 4 or 2g works best.
  15. Replies
    14
    Views
    1,965

    Re: C-1105 on FS-534 in Filthy Environment

    IMHO it's a 2 person job because if one person stretches the frame sides open you can fit it in much easier.
    Not sure if there is a video out there about it but it's a pain.
    The newer finishers for...
  16. Replies
    14
    Views
    1,965

    Re: C-1105 on FS-534 in Filthy Environment

    I'd replace the whole ejector unit, pita but saves a callback next week.
  17. Replies
    11
    Views
    359

    Re: Konice C368 Transfer Belt Reset

    it will be like a bandaid on a broken arm.
    just replace the belt and be done with it.
  18. Replies
    14
    Views
    602

    Re: slanted image on scanning

    did you lift up the front left corner with medium force and scan again or jumped right to the screwdriver?
  19. Replies
    8
    Views
    231

    Re: C3100p Wireless printing

    Amazon.com: TP-Link AV600 Powerline Ethernet Adapter(TL-PA4010 KIT)- Plug&Play, Power Saving, Nano Powerline Adapter, Expand Home Network with Stable Connections: Computers & Accessories
    plug 1 into...
  20. Replies
    14
    Views
    602

    Re: slanted image on scanning

    Maybe some putz leaned on the front left corner of the scanner and bent the frame.
    Put orig on glass and lift up the front left corner with medium force and scan again. If it's straight someone bent...
  21. Re: BH-C-280, copying by using the ADF comes in color but scans are mono. Huh?

    Easiest way is checking the scan settings prior to pushing start.
    It's a dinosaur but in user mode look at scan settings and look for default setting (factory default) if it set to current setting...
  22. Replies
    13
    Views
    1,195

    Re: Bizhub 368e smearing

    thats the oldest FW out there.
    X4 is the latest.
  23. Thread: Bizhub 808

    by Synthohol
    Replies
    9
    Views
    292

    Re: Bizhub 808

    oh crap, i had that too, i added labels to the switch for thickness to get it to fully engage.
  24. Thread: Bizhub 808

    by Synthohol
    Replies
    9
    Views
    292

    Re: Bizhub 808

    i bet i know what it is!!
    the belt fell off the duplex motor.
    add a shim like i did to the lower corner.
    i may be thinking of j3102, i dont remember now. dammit!
  25. Re: Original left on glass or detecting A4 with no paper C368

    If it hasn't been mentioned before, a dirty white sheet on adf will make it thing there is paper.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4