Search:

Type: Posts; User: Glaander

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Replies
    3
    Views
    1,223

    Re: FS-527exit roll noise

    i worked on one 2 weeks ago, I got squeaking noise, the solution for me was the metal guard with a few rollers on them, when you open the door, you see a metal lever to pull down to release a metal...
  2. Bizhub 552 no Gradation adjustment in imaging process adjustment

    hi everyone,

    I got in a BH552 B/W machine have some weird thing, at the imaging process adjustment, the Gradation Adjust button is missing, I even flash the firmware and still not there, would it...
  3. [Misc] Re: bizhub 501 WON'T Print (I think previous post is messed up)

    you are not totally wrong, you miss the point, there is scanner,which can do scan to e-mail, forward fax to pc, that is why the network interface for. the print option is up to user to buy ic-207,...
  4. [CQ] Re: Konica Minolta Bizhub c280 noise and blank areas

    that is A0EDM20000 Clutch, A0EDM20000 is the Parts Number
  5. [CQ] Re: Konica Minolta Bizhub c280 noise and blank areas

    Looks like you need to replace A0EDM20000 Clutch, there is bulletin #8012 for that
  6. Replies
    6
    Views
    642

    [Misc] Re: NOt entering the service mode

    Call A KM Tech, let the tech worry about it :D
  7. Replies
    12
    Views
    3,209

    Re: bizhub 501 won't print now

    is not the network, he is missing the printer setting tab, which meants ic-207 is not there or not working

    source from
    ...
  8. Replies
    12
    Views
    3,209

    Re: bizhub 501 won't print now

    in order to get 361,421,501 to print, it must install the ic-207 as print controller, the ic-204 will not work on 501, only works for 420,360, and 500
  9. Replies
    5
    Views
    668

    Re: bizhub c360 fs 527 sd 508

    if they are not consumable related, I think you will have to buy it off dealer
  10. Replies
    7
    Views
    708

    Re: printing won't function on bizhub420

    Here is ic-204

    http://www.ebay.com/itm/IC-204-Image-Print-Controller-16JE-Konica-Minolta-and-Oce-/140668182709?pt=LH_DefaultDomain_0&hash=item20c07a20b5
  11. Replies
    8
    Views
    1,026

    Re: some good news

    not all, they kept only 501, discontinued 361 and 421, and closest you can get is 363, 423, and 283
  12. Thread: KM 421

    by Glaander
    Replies
    4
    Views
    804

    Re: KM 421

    did you flash firmware after you switch board? flash firmware is require on switch board.
  13. Replies
    10
    Views
    1,368

    Re: Locks up after one print every time

    since is driver problem, I found this is driver release notes for Pagepro but you might as well try this in the driver setting, I meant nothing hurt to try

    Notes for PS driver
    ===================...
  14. Re: Di-450 with Pi-5501, W7/64bit driver workaround?

    there is vista driver, I sure that will work if you follow the pcmag.com steps

    Support & Drivers Search Results | Product: Di3510 / File Type: Drivers
  15. Re: Di-450 with Pi-5501, W7/64bit driver workaround?

    there is universial driver out there, but is for bizhub, don't know that will work for di line tho.
    ...
  16. Re: Di-450 with Pi-5501, W7/64bit driver workaround?

    This might work

    7 Windows 7 Printer Installation Tips | PCMag.com
  17. Replies
    29
    Views
    5,064

    Re: C280 intermittently locking up

    just a dumb question here, did you check/change network cable and the network jack pin? in the pass I see copier/printer have very slow respond on print job, some work fine after change cable some...
  18. Replies
    4
    Views
    656

    [CQ] Re: Magicolor 5670EN

    1 Check the cable and connector for proper
    connection and correct as necessary.
    2 Change PH unit.
    3 Change PRCB.
  19. Replies
    7
    Views
    825

    Re: KonicaMinolta Bizhub C-20, need info..

    LOL try C-10
  20. Replies
    5
    Views
    1,141

    Re: magicolor 4650 printer offline?

    you pretty much answer your own question, you can't ping the printer, means the printer has connection issue to the network, start with cable? switch? router? maybe even switch a network cable? if...
  21. Replies
    2
    Views
    405

    Merry Christmas

    Merry Christmas to everybody on the forum
  22. Replies
    13
    Views
    1,977

    [Error Code] Re: Same BH 420, Same C-2403

    sometimes damage toner bottle will cost c-2403 too. but that still user side issue, you can tell them there is 3 free of charge about toner bottle clearing, at the 4th will be charging, once down to...
  23. [Misc] Re: Have you had this sort of noise from machine?

    those shadow around the print normally is paper dust on the ph laser window, the noise only the ph polygon mirror motor is spins that fast in the machine, so I can say your ph has a page paper or...
  24. Replies
    11
    Views
    9,511

    Re: Bizhub C220 Bypass Tray Sensing Problem.

    First of all, did you set this machine up as new yourself? if yes, did you do the following

    did you follow up the set up step by the manual?

    on the machine is using KM toner or 3rd party? if...
  25. Replies
    4
    Views
    784

    Re: magicolor 8650 cyan lines

    as i see the 2nd page, all IU is down to 4% and 2%, it would be bad IU too, as their life counter is running out.
Results 1 to 25 of 35
Page 1 of 2 1 2