Search:

Type: Posts; User: Estill0918

Search: Search took 0.05 seconds.

  1. [CQ] Question about dv troubleshooting pls input !

    when we have any dv related issue on any of the big Muratec models the manual or customer support really doesn't help. they just say to clean idc and manual add... is that seriously all we can do to...
  2. Replies
    1
    Views
    4,274

    [Misc] Life stop on a MFX-3535 OR MFX-3595

    is there a known setting to turn off the Life stop on these machines? we have some customers that the drums stop the copier from worming within a days notice and would like to turn Life stop off...
  3. mfp is a no go. one of my idc sensors running low...

    mfp is a no go. one of my idc sensors running low around 2.6 cleaned and cleaned now going to try and replace the prcb due to the low idc sensor.
  4. Manufacturer suggest the MFP board. going to try...

    Manufacturer suggest the MFP board. going to try that tomorrow . machine is under warranty also . so the idea of replacing if this doesn't fix it is possible but I would prefer to fix this.
  5. just replaced the PH UNIT and it he issue on...

    just replaced the PH UNIT and it he issue on magenta and black still have the issue. not sure what else to do . maybe engine board.
  6. I'm here because Muratec Tech Support is rough... HI

    Thanks for having me. I've already found a lot of helpful information not in the service manual or that I can get with from our tech support !
  7. when you mean suck out of the black developer did...

    when you mean suck out of the black developer did you have an imaging issue similar or were you throwing low tcr level codes ?
  8. Yes, thankfully it's under warranty . We've had...

    Yes, thankfully it's under warranty . We've had pretty good luck with Konica and Muratec but when they mess up , they seriously mess up. We've had some issues that we couldn't fix and had to replace...
  9. Consumables

    Consumables are parts you have to replace on standard maintenance , it's the actual term the manufacturer uses for the parts. Sorry for the confusion.
  10. meh

    going to try the PH UNIT TOMORROW. it's happening on M C K and nothing on Y
  11. Re: Imaging Issue on a 364E i have never seen before!

    I guess some don't know what consumables are.
  12. Re: Imaging Issue on a 364E i have never seen before!

    here's some examples I am getting.
  13. Imaging Issue on a 364E i have never seen before!

    It almost resembles tire tracks and shows up on Magenta & Black. I have replace the HV board, transfer belt, transfer roller , swapped out the consumables to check for improvement, firmware update ,...
Results 1 to 13 of 13