Search:

Type: Posts; User: blackcat4866

Page 1 of 20 1 2 3 4

Search: Search took 0.26 seconds.

  1. Replies
    2
    Views
    91

    Re: E Studio 25s / Fuser unit

    I can probably help out with the manuals, but there isn't much hope that you'll find any parts. Send me a PM with destination.
    =^..^=
  2. [Misc] Re: user trying to scan a check and it shows up blurry? all other scans work fine.

    Yes, it's called prohibited originals or counterfeit protection. It also applies to currency, stocks, bonds, and other financial instruments. A couple of typical ways around this are:

    1) select...
  3. Replies
    3
    Views
    205

    Re: help about kyocera taskalfa 3051 Ci

    Can you further define: "not working"?
  4. Replies
    26
    Views
    1,357

    Re: 8518A C471 error

    By the time they turn that color brown, they're getting pretty brittle and don't have much time left before they shatter. It's a good idea though. =^..^=
  5. Replies
    11
    Views
    458

    Re: C-258, unable to load firmware...

    You're right about one thing: I don't spend a lot of time assuming and guessing when there isn't much information to work with ... not even the firmware level. I try to follow the KISS Principal at...
  6. Replies
    11
    Views
    458

    Re: C-258, unable to load firmware...

    Are you aware of the red Stop button? I recommend that you take a glance a the "Firmware" section of the manual. =^..^=
  7. Replies
    1
    Views
    152

    [Error Code] Re: LexmarkMS610 DN 111.30 error

    Well, clearly you disturbed something in the process of cleaning.

    If it were me, I would remove & re-do everything I already did with the laser. Make sure all the connectors are made (especially...
  8. Replies
    9
    Views
    430

    [Misc] Re: BH c224e vs 454e for small office

    Make prints of these documents & scan them back to this post. I can offer better information then:
  9. Re: Kyocera 3645 not grabbing an IP address.

    We saw this a lot when the first Gigabyte NIC's came out. Most of our customers were still running 100MB network routers, and the MFP did not always accurately choose the correct network speed,...
  10. Replies
    4
    Views
    386

    Re: Kyocera 6635cidn error code 4600

    Yeah, it's a failure of the laser slit glass cleaner to complete it's cycle. It's the same mechanism on Genesis, Mebius, & Mebius II. There are several reasons why this might occur:

    I had a...
  11. Replies
    9
    Views
    430

    [Misc] Re: BH c224e vs 454e for small office

    Either of these models are reliable ... and a good choice. And reasonable at $600. But be prepared to put some money in them when they arrive. At $600 there will be things to fix. =^..^=
  12. Replies
    8
    Views
    490

    Re: Multimeter leads

    I keep a film canister of straight pins and a set of small alligator clip leads in my case. When metering out small connectors, I push a straight pin into the connector & clip the ground to frame. If...
  13. Re: Kyocera 3645 not grabbing an IP address.

    Perhaps unrelated ... but some tabletop Lexmarks rebadged as Konica Minolta have known network issues. They just don't work in certain network situations. As an experiment we ordered the Lexmark...
  14. Replies
    7
    Views
    203

    Re: Hi everybody

    So true ... LOL. =^..^=
  15. Replies
    7
    Views
    203

    Re: Hi everybody

    Welcome! I suspect your idea of vintage may be a little different than ours. A ten year old machine is typically 3 years obsolete in our business. I suspect that you see devices much older. =^..^=
  16. Re: Kyocera 3645 not grabbing an IP address.

    Sounds like you've got a bad cable or network port. Does your laptop pick up a DHCP address? =^..^=
  17. Replies
    11
    Views
    410

    Re: Kyocera FS-C2626 color deviation

    From the images that you've included I would do the following:

    Remove consumables and clean the laser slit glasses
    Replace MC-590 (4pc) 302KV93120
    Do the special firmware
    Do the color...
  18. Replies
    7
    Views
    287

    Re: kyocera 3500i hazy line

    I think I'd like a visual sample please:
  19. Replies
    11
    Views
    410

    Re: Kyocera FS-C2626 color deviation

    I suppose that it depends on how important the copy quality is to you. It's never going to be photo quality, but maybe you can get reasonable business quality with the special firmware.

    If it were...
  20. Replies
    7
    Views
    354

    Re: 4505AC Color Deviation- Yellow Only

    The badly misaligned yellow patches indicates to me that yes, it's the laser. I've changed four or five of these lasers. I've seen that bulletin, and I've never been able to fix it without the new...
  21. Replies
    11
    Views
    410

    Re: Kyocera FS-C2626 color deviation

    If you're an enduser this isn't something you're going to be able to fix yourself. If you you hoping for better color quality, this machine will be a ... challenge, and costly. Tony is right about...
  22. Replies
    2
    Views
    119

    Re: Toshiba estudio 455 motor

    From what I recall, the main drive motor on a eS455 looks like this. As they got older and the developing unit got more difficult to drive, I've seem the helical pinion gear strip, making a LOUD...
  23. Replies
    7
    Views
    194

    Re: e4505AC E580

    I reached memory capacity a long time ago. Everything else has to go into the database. =^..^=
  24. Replies
    7
    Views
    194

    Re: e4505AC E580

    I've got two references to E580:

    Misfeeds "E020, E580, E520" on duplex. The locking feature that retains the leaf springs for the reverse roller idlers breaks, leaving no pressure at the reverse...
  25. Replies
    24
    Views
    919

    Re: Network Cabling

    I can seem to remember T-568A pretty consistently, so that's my favored configuration. =^..^=
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4