Search:

Type: Posts; User: ivovb

Page 1 of 20 1 2 3 4

Search: Search took 0.17 seconds.

  1. Replies
    16
    Views
    527

    Re: bizhub c300i frozen on loading

    Absolutely agree.

    Does anyone already uses some aftermarket SSD successfully instead of KM one's?

    I have several similar cases with C250i, but upgrading to 45/75 firmwares solves the problem....
  2. Replies
    1
    Views
    219

    Re: Konica minolta c203

    MFP board abort code. Check/reconnect all of the connectors to the MFP board.

    BR
  3. Thread: 360i drum error

    by ivovb
    Replies
    5
    Views
    149

    Re: 360i drum error

    Check/clean/set contacts concerning drum chip and HV contacts, too.

    BR
  4. Replies
    11
    Views
    406

    [Misc] Re: C250i Self Diagnostic on start up

    Starting machine with Power key pressed will cause Self diagnostic. So check if Power key is somehow constantly blocked.

    BR
  5. Replies
    10
    Views
    766

    Re: Recovering meter readings C364e

    TPM issue and zero counters whispers battery problem. Did You check battery voltage on MFPB. It must be 3v, not 0.5 V or so...

    BR
  6. Replies
    9
    Views
    424

    Re: I-series colors off at install

    Use latest firmware G00-7D. Two of the predecessors targeted a print quality proplems.

    BR
  7. Replies
    10
    Views
    313

    Re: User Auth - self associating your card

    SafeQ, PaperCut or LK-114?

    BR
  8. Replies
    19
    Views
    2,663

    Re: C454e "TPM chip has been changed"

    Here is some update on my case. First of all many thanks to Gergo. Secondly Yes it is not needed to order any spare parts from KM, just 3 euro aftermarket battery 3V 2477. It is obviously that KM...
  9. Replies
    19
    Views
    2,663

    Re: C454e "TPM chip has been changed"

    Hello,
    I've faced same problem today and do some investigation myself... In EU version of document concerning firmware there is statement:
    "It is not necessary to use the countermeasure firmware...
  10. Thread: 9401 bizhub 4052

    by ivovb
    Replies
    4
    Views
    218

    Re: 9401 bizhub 4052

    Salut, ša va?
    Check #1 and #3 in service manual:
    #1 Cables are often too tense
    #3 it is quite old machine and if You didn't clean optics it is time. Moreover Paris is not so clear air...

    BR...
  11. Replies
    45
    Views
    3,174

    [Dead] Re: Konica Minolta C360i

    Yes You are right and it is not only KM, but Toshiba, Brother, HP etc. I have several times of a wrong procedures concerning replacement electronic parts or solving a problem. Quite often expirience...
  12. Replies
    17
    Views
    1,088

    Re: C224e duplex jams

    Have seen several times such a problem. All the times decision is as follows.

    1. Remove Gate switch unit using chapter 5.7.2 in SM
    2. Look at the last photo in procedure - especially gate switch...
  13. Replies
    26
    Views
    1,848

    Re: My bizhub c224e copier does not start.

    That's my point. All of my cases are as described in first post leads to SSD exchange, firmware update and problem removal.

    BR
  14. Replies
    8
    Views
    403

    [Error Code] Re: Bizhub c558- error 2156

    You need X4 firmware to get rid of the problem.

    BR
  15. Replies
    26
    Views
    1,848

    Re: My bizhub c224e copier does not start.

    Not mine statistic...

    BR
  16. Replies
    26
    Views
    1,848

    Re: My bizhub c224e copier does not start.

    I'm 99.99 % sure it is SSD! Anyway in order to make it 99.99999999 % can You tell current firmware version?

    BR
  17. Replies
    9
    Views
    451

    Re: user auth vs account track

    I would give an example of using both methods at the same time. Let's take a lawyer firm.

    First of all they need User Authentification (UA), because they have to control (eg who is using the...
  18. Replies
    3
    Views
    216

    Re: Konica C284e firmware

    Or it is a .doc for Europe.

    BR
  19. Replies
    8
    Views
    359

    Re: Replacing the 4 series MFPB and PRCB

    SSD has leading part - so we get finally 1000.

    BR
  20. Replies
    8
    Views
    359

    Re: Replacing the 4 series MFPB and PRCB

    Exactly. I've just save it for a moment... ;-)

    BR
  21. Replies
    8
    Views
    359

    Re: Replacing the 4 series MFPB and PRCB

    Thank You for information, but... it is not absolutelly true. Ass usually KM does not provide the whole info...

    I have already managed to exchange an MFP board from one machine to another. Allmost...
  22. Replies
    7
    Views
    763

    Re: Standby Bizhub C258

    Did You enter MAC?

    I have such a problem even in newest c250i. Here is my working combination for c250i
    Administrator Settings - Maintenance - Timer Settings - Power Settings - Power Key-Power...
  23. Replies
    92
    Views
    19,823

    Re: Firmware Toshiba for Europa version

    Hi Thomas,
    I need latest firmware for e-Studio 257. I believe it must be 1281, isn't it?

    BR
  24. Replies
    14
    Views
    2,501

    Re: Wrong toner indicator bizhub 227

    It is my way, too.

    BR
  25. Replies
    4
    Views
    3,553

    Re: OKI C531 service manual & parts

    Hi everyone,

    My apologies for using old thread. I need so offered C532 manual. I can trade it for any of KonicaMinolta, Brother, Toshiba.

    BR
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4