Search:

Type: Posts; User: charm5496

Page 1 of 20 1 2 3 4

Search: Search took 0.27 seconds.

  1. Replies
    15
    Views
    1,331

    Re: Startup Problem C5035i IR Advance

    When you swapped the boards around, did you move the counter PCB's? All those small boards need to stay with the original machines. That is why you now have an E246 code.
  2. Re: Canon IPF750 - head replaced, head cleaning gives 03800500-2F42

    I would look at the purge unit and/or the carriage unit. Looks like you have a lack of air suction. Check your tubes for air pockets in them
  3. Replies
    8
    Views
    446

    Re: Latest L Printer Service Tool

    Did a quick search and this issue has several hits on the tech support site. Issues with the ribbon cable, power supply, main controller, carriage units and print heads. Happy troubleshooting
  4. Replies
    8
    Views
    446

    Re: Latest L Printer Service Tool

    Doesn't the top cover have a switch and sensor system to manage its open/close status on this model?
    If so, you might be missing part of the system.
  5. Replies
    4
    Views
    283

    Re: Blank Display

    Reseat RAM and connectors on the main controller. If no help I would recommend replacing the main controller.
  6. Replies
    5
    Views
    341

    Re: Canon IR C5045 cannot print anymore

    When you access the fiery interface from the copier control panel, do you a screen that says idle, or does it say "wait a moment"
  7. Replies
    11
    Views
    949

    Re: Canon ADV IRC3330if Powers off

    Have had the HDD cause the machine to shut off in other models. They can ground out, and cause all kinds of goofy things.
  8. Replies
    7
    Views
    324

    [Misc] Re: Canon 3235 found running or cleaning?

    If its not the toner bottle almost being empty, check your fixing film and cleaning roller for wear and old grease build up
  9. Re: Canon IR6255 Nothing But Power Light and Energy Save on

    Normally it's the main controller with these symptoms. Make sure you swap over all the boards from the old one to the new one when you replace it.
  10. Re: CANON iR 2200/N - 3300 Firmware-System Files

    Well yeah, that was almost 9 years ago. You would have to have a PC with parallel port or the canon usb to parallel cable to load this firmware. I have not done it on this model in about 8 or 9...
  11. [Error Code] Re: IPF8300 trow error 2f43 after paper jam 2F13

    looks like your paper buckled and your carriage unit crashed into the paper and possibly damaged one or both of the printheads.
  12. Replies
    7
    Views
    1,837

    Re: IRC adv 5255i E000029-0003

    it could be that the shutter is bound up and not opening up for the windows to read the patches correctly. Also check the arm that connects the solenoid to the shutter.
  13. [Jamming] Re: canon ir2520 jam 0107 A4 and first part of paper in fuser

    there is a duplex clutch that can cause this jam code on the 2525 series machines
  14. Replies
    10
    Views
    3,028

    Re: E027-0400 AdvC5035

    Error :

    An error code of E027-0400 is occurring at power on.

    Workaround :

    In this case, the black toner bottle was not seated correctly in position resulting in the error code. Removing...
  15. Replies
    9
    Views
    1,374

    Re: Canon ir adv8085 slow

    paper stock settings on plain, and not something funky?

    is it starting out at rated speed and then slowing down?
  16. Replies
    0
    Views
    400

    Ricoh C901 toner

    anyone needing to unload some Ricoh C901 toner?
    I have a client that is looking to acquire some. Must be OEM and sealed in the original packaging
  17. Replies
    1
    Views
    402

    Re: Pro 8085 and 8085

    looks like it comes with the H1 fiery, other than that, I do not see much
  18. Replies
    3
    Views
    557

    Re: Canon ira c5051 white copy

    if your test pages are coming out white, then you have a print issue with the engine and not just the copier. Was it working correctly before you loaded the firmware on the device?
  19. Re: H1 Inner Finisher for use on Gen 3 IRA-C5540i etc.

    it is a different style finisher. It would not function in the 55 series machines
  20. Replies
    18
    Views
    1,954

    Re: Canon 7095 Light Prints on Damp Paper

    I still string those bad boys all the time. New hires have no idea
  21. Re: E-535 002 Canon ir adv 8095 pro finisher D1

    Error :


    Error code E535-0002 is occurring.

    Swing Guide motor, M110 and the Finisher Controller PCB have both been replaced. Sensor S118 in the Swing Guide unit was replace. Sensor S110,...
  22. Re: Canon IR Advance using up developer only magenta

    I would check the HVT if you have gone through that many developing units
  23. Replies
    4
    Views
    640

    Re: Canon IPF 8300

    what about the RUI, what is it reading?
  24. Re: Canon IR2525 "prepare the toner" message

    that is normally an engine controller issue
  25. [Error Code] Re: Error Code 000998-0002-05 on Canon ImagePress 7000VP

    Problem :

    E998 error codes displayed after a new install is performed on the imagePRESS C7000VP Series.

    Solution :

    It has been noted that certain connectors are loose and not plugged in...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4