Search:

Type: Posts; User: GIUBOSS

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    2
    Views
    124

    Re: MP2501sp - SC520

    I think it refers to the main engine: 29.AX060502
    DC BRUSHLESS M
    OTOR: MAIN: 24.7W faulty, in case you don't solve with Nokktekk's suggestion.
  2. Replies
    6
    Views
    273

    Re: MP 4054 Allocation Buttons

    Did you reset the machine from WIM?
  3. Replies
    6
    Views
    273

    Re: MP 4054 Allocation Buttons

    Configuring function keys (when using the standard operation panel)
    so have you already done this procedure?
  4. Replies
    25
    Views
    1,344

    Re: MPC2003 white image repeat

    I had a similar problem with a 2051, maybe it can help you, the problem was on the laser unit, open it and clean the glasses and mirrors of the polygon
  5. Replies
    3
    Views
    327

    Re: MP C 6003 J019 jams

    check if the image is correctly imprinted on the transfer which may not move well, try all the paper trays and the bypass. Does the fuser unit rotate with certainty well?
  6. Replies
    1
    Views
    180

    [Misc] Re: IM C6000 Paper Separation Issue

    I think you will need to give more information on the problem; picking up 2 sheets of paper at random do you mean from some paper drawer you don't know? Is it jammed?
  7. Thread: MP C307 locked

    by GIUBOSS
    Replies
    7
    Views
    429

    Re: MP C307 locked

    order a new : D2969590 NVRAM
  8. Replies
    2
    Views
    192

    Re: Canon IR C3080 Progress Bar not Moving

    Check / update the firmware, hdd and controller board
  9. Replies
    3
    Views
    277

    Re: Bad drum? Developer? Other?

    Always consider the PM counter of wearing parts. Most likely the developer
  10. Replies
    1
    Views
    158

    [Misc] Re: Ci 40 MFP Software

    try with QNAVI Panasonic: Quick Image Navigator | ?????? | ??????? | ??????? | Panasonic, if you have installed the twain driver it should go.
  11. Thread: Kyocera 2554ci

    by GIUBOSS
    Replies
    6
    Views
    584

    Re: Kyocera 2554ci

    it is advisable to have the technical service manual will be much more useful ,
  12. Replies
    2
    Views
    244

    Re: IMC300 and MPC307 PCDU

    usually if the unit enters the machine correctly it is sufficient to replace the td sensor complete with connector
  13. Replies
    26
    Views
    1,489

    Re: Ricoh Aficio MP3352 bought at auction

    and now we are at the critical point ... the firmware is accessible by authorized technicians, dealers, but you can also buy it here from some technician. For the update procedure I suggest you...
  14. Replies
    13
    Views
    685

    Re: Ricoh MP2352 SC401- Strange problem

    It happened to me with an mp3351 and it was the bad pcdu or a false contact in it
  15. Replies
    4
    Views
    295

    Re: ricoh mpc 3501 jam

    jam code? sc582, why do you change the fuser with the machine blocked by jam? reinstall the old fuser and clear the jam first
  16. Replies
    5
    Views
    319

    Re: Oki C531 printer

    I wouldn't want to be trivial even though I haven't repaired a lot of OKI's but have you tried putting the old toner back?
  17. Replies
    12
    Views
    792

    [Misc] Re: Ricoh locked print read error ERR:

    Have you tried to print with different PCs connected to the Ricoh printer (model ??) Follow Copier tech's advice regarding the ip address and fw update. Have you installed the pcl6 driver? Keep in...
  18. Replies
    3
    Views
    414

    Re: konica minolta bizhub 226 memory clear

    What do you mean by memory, factory reset or personal settings? Unlikely cause, to be scrupulous check the switch that has no burns etc otherwise it could be a malfunction of the buffer battery or...
  19. Replies
    3
    Views
    509

    Re: Ricoh DD 3334 duplicator master problems

    to solve the problem try to gently clean the surface of the basket with a cloth soaked in water and degreaser or by spraying directly on it avoiding the ends. Also, you also need to spin the drum to...
  20. Replies
    11
    Views
    937

    [Jamming] Re: Ricoh MPC6503 (Charis) - Jam code 025

    sometimes with haste or with little attention this also happens ... thanks for updating us.
  21. Replies
    7
    Views
    567

    Re: Ricoh Aficio 1035 SC542 Error code

    [QUOTE=Kosta25;1817472][COLOR=#333333]AX43 0064 - This lamp is broken. Hard to find...

    I could look for it among my old things
  22. Replies
    1
    Views
    343

    Re: Epson wf-c 5790 error code 100016

    hi, possibly write in English here '. If the product was purchased before January 2021 it is necessary to update the firmware.
  23. Re: RICOH MP9002, Duplex inverter motor 5804 does not move.

    if you have already done a test with another duplex, I think it works, and that does not solve the problem, you should move the aim to other parts of the machine. Is the machine perfect for normal...
  24. Replies
    2
    Views
    287

    Re: Ricohh DD 3334 Duplicator master problems

    hello, you should post duplicators in the appropriate section of the forum. So uniform inking of the drum makes the matrix stick well to it. You have to make sure that the ink is distributed...
  25. Re: RICOH MP9002, Duplex inverter motor 5804 does not move.

    just to be picky, did you check inside the machine if there were any paper scraps in the duplex connectors?
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4