Search:

Type: Posts; User: GIUBOSS

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Re: RICOH MP9002, Duplex inverter motor 5804 does not move.

    if you have already done a test with another duplex, I think it works, and that does not solve the problem, you should move the aim to other parts of the machine. Is the machine perfect for normal...
  2. Replies
    2
    Views
    109

    Re: Ricohh DD 3334 Duplicator master problems

    hello, you should post duplicators in the appropriate section of the forum. So uniform inking of the drum makes the matrix stick well to it. You have to make sure that the ink is distributed...
  3. Re: RICOH MP9002, Duplex inverter motor 5804 does not move.

    just to be picky, did you check inside the machine if there were any paper scraps in the duplex connectors?
  4. Replies
    4
    Views
    136

    Re: Ricoh Aficio 1035 SC542 Error code

    i found this:




    AX43 0064
    Heater - 230V 550W 335mm
  5. Replies
    1
    Views
    100

    Re: Xerox wc7556 job processing indefinitely

    you have installed the official driver and with a fixed ip address, try to print from a single pc connected directly to the network or usb to rule out that it is a network problem.
  6. Replies
    15
    Views
    604

    Re: MP C3002 No Toner(Bk) message

    check all gears of the developer unit, and inside the machine if it has leaked. I recommend replacing the developer and reviewing the pcu section. First check, doing the forced loading of the...
  7. [Jamming] Re: SPDF D683 on MPC5503 J001 Jam at P after detecting blank page

    have you performed a complete maintenance of the ardf, cleaning all optical sensors?? New rubber rollers?
  8. Replies
    4
    Views
    224

    Re: Ricoh MP2352 Twain driver

    are you sure that stordoc also doesn't work at 32bit?
  9. [Misc] Re: Problem when print front and rear in A3 paper

    check the belt
  10. Replies
    1
    Views
    149

    Re: Ricoh sp4510dn service manual

    write me with PM
  11. [Misc] Re: Problem when print front and rear in A3 paper

    where exactly do you find it jammed? Have you tried putting the A3 in another input tray? Are rubber rollers new?
  12. Replies
    4
    Views
    217

    Re: Canon IR500i not printing or copying

    update all firmware
  13. Replies
    4
    Views
    217

    Re: Canon IR500i not printing or copying

    have you tried an internal test of the machine?
  14. Replies
    3
    Views
    178

    Re: Ricoh MPC2051 english language

    write me in private
  15. Re: Konica bizhub 601 - Incorrect Paper Tray Size

    as with other brands, this type of problem is due to the paper size sensors or dirty, out of place or oxidized switches usually mounted on the machine body at the bottom where the drawers slide.
  16. Replies
    2
    Views
    251

    Re: HP M553 Fuser reset option not showing up

    If the procedure is correct, you probably have a software problem, try to reset and update the firmware. Have you tried on the web page?
  17. Replies
    5
    Views
    237

    [Error Code] Re: Pro C5100 - SC401-01

    Genuine drum? Old developer? Did you clean the surface of the developer roller? Try cleaning the ID sensor and then running the manual process check.
  18. Re: Need service manual for Canon I-Sensys MF628Cw

    Let's write in private
  19. Replies
    7
    Views
    328

    [Jamming] Re: Ricoh MPC6503 (Charis) - Jam code 025

    was the previous replacement problem the same? Original replacements? duplex, any size / paper tray?
  20. Re: Ricoh SP 5300DN wont print "Load paper in bypass tray" error message

    check the document size if it matches the tray where you intend to print, or select tray 1 and not auto tray select.
  21. Re: Ricoh SP 5300DN wont print "Load paper in bypass tray" error message

    Before starting a new print you should check the print in progress in the printer properties and cancel the current job, otherwise the printer will continue to ask for paper in the tray used at the...
  22. Thread: Reset

    by GIUBOSS
    Replies
    6
    Views
    284

    Re: Reset

    if your machine has a lock with an access code, you need to log in to administrator mode. As a last resort, restore in service mode
  23. Thread: Reset

    by GIUBOSS
    Replies
    6
    Views
    284

    Re: Reset

    you have already tried with the default: Admin, pw. : Admin?
  24. Re: Konica Minolta 654e service manual request

    read private messages
  25. Replies
    6
    Views
    254

    [Jamming] Re: MPC 5000 tray 2 Guid plate

    remove the duplex for easier access to the guide plate
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4