Search:

Type: Posts; User: allan

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    19
    Views
    8,272

    Re: Konica Minolta C280 error C-2558

    The guys was selling these reset tools for stiff price. All it was was a switch and selected short circuits in epoxy.
  2. Replies
    14
    Views
    659

    Re: slanted image on scanning

    Running the setup chart and doing the auto adjustments can help.
  3. Re: YSoft USB READER 3 MF loadable device driver

    I guess Ysoft should also have access to the KM driver software.
  4. Thread: Bizhub C35P

    by allan
    Replies
    3
    Views
    195

    Re: Bizhub C35P

    You can get a reset chip for the image unit.
  5. Replies
    6
    Views
    294

    Re: Konica Minolta C658 - life expectancy

    No way more is possible. The harder you punch them the more they can do.
  6. Replies
    6
    Views
    294

    Re: Konica Minolta C658 - life expectancy

    Sales guys does not want to hear this. 4.8 Mil or 5 years.
    Support life these days are around 8 years.
  7. Re: Develop ineo+227 (Konica ) error code c-2152

    as Per tulintron check the ICP's on PRCB. I would start with the ICP closest to where the clutch plugs in on the board.

    Had this a couple of times on mostly C360 machines.

    Find the IC...
  8. Thread: C654e trouble.

    by allan
    Replies
    13
    Views
    448

    [Misc] Re: C654e trouble.

    Will check what i can get to cut seals out from.
  9. Thread: C654e trouble.

    by allan
    Replies
    13
    Views
    448

    [Misc] Re: C654e trouble.

    What do you do about the sponge seals between the diferent components of the IU's? Did fiddle with the IU711CMY a while ago and remembered tearing a seal somewhere while dissembling it.
  10. Replies
    5
    Views
    241

    Re: bizhub 420, duplex problem

    Recall there was a very common problem with switchback sensor actuator un-clipping or breaking.
  11. Thread: C654e trouble.

    by allan
    Replies
    13
    Views
    448

    [Misc] Re: C654e trouble.

    Anyone having good luck with rebuilding these IU's? Had mixed outcomes rebuilding the K drum units and refilling the K dev tanks.
  12. Thread: C654e trouble.

    by allan
    Replies
    13
    Views
    448

    [Misc] Re: C654e trouble.

    He has been a very loyal cash costumer of mine. Charged him at a better rate than most other customers.
    Just wish I could be present when he picks the boxes up from across provincial lines.
  13. Thread: C654e trouble.

    by allan
    Replies
    13
    Views
    448

    [Misc] Re: C654e trouble.

    Will look for special tray setting on tray1 and check the default color mode. Never did try and print a management list. The MML should have the same issue if its a paper size/type problem. Remember...
  14. Thread: C654e trouble.

    by allan
    Replies
    13
    Views
    448

    [Misc] Re: C654e trouble.

    Will take the time to do that fore sure the next time i get there. Most of my time today was spent on cleaning and inspecting the units before having to leave for a contract call. The color IU's are...
  15. Thread: C654e trouble.

    by allan
    Replies
    13
    Views
    448

    [Misc] C654e trouble.

    Hi guys.

    A costumer of mine got a C654e from a seller as is. Its on 41K b/w and 8K color clicks.Found the ADF original tray ripped out and harnesses with many broken wires there was also evidence...
  16. Replies
    5
    Views
    260

    Re: Konica c360 smudge

    Around here we call the smudge a butterfly.
  17. Replies
    14
    Views
    692

    Re: Bizhub 454e - need 2nd opinion

    PH unit does look the similar. Does the part numbers for the C364e and C554e differ?

    Does look like one of the diodes are not working correctly.
  18. Replies
    1
    Views
    145

    [Misc] Pro 951 vs Pro 1100 UFR's and thermistors

    Hi guys.

    I have by accident installed Pro 951 upper fuser rollers into Pro 1100 machines. They do kind of work but errors out from a dead cold startup with C3503. The Pro 1100 roller is much...
  19. Re: C458 with blue LEDs below control panel lit all the time

    Unplug the network cable then start it up to see if the data light stays on. Does the LED's start blinking if you send a job? Does it have a fax kit installed?

    You can unplug the LED connector for...
  20. Replies
    3
    Views
    432

    Re: Konica pro tech needed 951 and 1100

    Know just the guy but already working there. pro techs...
    Not a lot of them around.

    Especially the kind of tech that goes out of his way to resolve issues. You know resourceful and keeps them...
  21. Replies
    9
    Views
    514

    Re: Auto Dealer Window Sticker Printer

    A brother label printer comes to mind. Had good fun with there before.

    If B/W is requiered run of rolls of thermal sticker paper. Thermal printers are fast these days.
  22. Re: Konica C284e "Preparing to connect to external server please wait"

    If User auth and ID and print is used make sure it authenticates on the machine only. There is an option to select an external server. Make sure its set to authenticate on devise only.
  23. Thread: Stress level

    by allan
    Replies
    16
    Views
    1,073

    [Misc] Re: Stress level

    Also stopped participating in those threads. Its pointless to try and change a set mind about there fatalistic outlook.
    Been polarizing people that used to get along just fine before.
  24. Replies
    47
    Views
    2,100

    Re: Bizhub 364e - clicking/knocking noise at idle

    You can remove the flange. Screwdriver(s) The gap in the ring gives it away.
    Yes you need that exact one. The flange is offset from the edge. Others are flush with it.
    They are super common on the...
  25. Replies
    47
    Views
    2,100

    Re: Bizhub 364e - clicking/knocking noise at idle

    There is a groove in the bearing. The flange is a snap ring that gets snapped into the groove. The gap does not serve a purpose.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4