Search:

Type: Posts; User: stobby2

Page 1 of 6 1 2 3 4

Search: Search took 0.13 seconds.

  1. Thread: invalid black

    by stobby2
    Replies
    4
    Views
    248

    Re: invalid black

    Yes. I did read about this some time ago. I spent ages going through the service codes to try to find something that would reset this but no joy. Actually managed to immobilize one machine completely...
  2. Thread: invalid black

    by stobby2
    Replies
    4
    Views
    248

    Re: invalid black

    Yes. That is the answer but it drives you mad. I have never known another machine which does the same. Shame. As the Xerox are such a great printer. Strange thing bearing in mind l had around 10...
  3. Replies
    2
    Views
    117

    Re: xerox 6600 fuser reset

    I did wonder about trying that but thought l would put it out to you guys anyway. Hopefully it might be a small fuse which blows and resets or resistor. If not nothing much can be done.

    Thanks...
  4. Replies
    2
    Views
    117

    xerox 6600 fuser reset

    Does anyone know how the Xerox Phaser 6600 printer resets the machine counter when a new fuser is installed. i.e chip, fuse etc within the fuser. I cannot find anything on the net. A lot of printer...
  5. Thread: HP M602

    by stobby2
    Replies
    1
    Views
    352

    HP M602

    Hi Guys.

    We sold two HP laserjet M602n Printers to a Customer one works perfectly ok the other has the following issue. I have copied the Customers email. Any ideas??

    We have now done a factory...
  6. Thread: invalid black

    by stobby2
    Replies
    4
    Views
    248

    invalid black

    I have a Xerox 6600dn printer which will not accept a replacement toner even though it is an original Xerox. Comes up with Invalid Black. Does the same with other colours as well. It appears that ...
  7. Replies
    1
    Views
    1,877

    toners not recognised

    We have a customer with a xerox 6605dn which we supplied a few months ago refurbished. It had good original toners fitted when we supplied it. They have gone to change the toners and no matter which...
  8. Thread: print head

    by stobby2
    Replies
    4
    Views
    438

    Re: print head

    Cheers Kiran.
    Run it tomorrow
  9. Thread: print head

    by stobby2
    Replies
    4
    Views
    438

    Re: print head

    Thanks Kiran

    I must admit we only ran it up stand alone. I will plug pc in and see if l can get it to print so we can test
    Thanks again for the info
    Roger
  10. Thread: print head

    by stobby2
    Replies
    4
    Views
    438

    print head

    Hi Guys

    We have just intraded an HP T1200 42" plotter. Very nice condition however asking to replace print heads as out of date. Is there a way around this as a temporary measure as we need to...
  11. Thread: do feed issue

    by stobby2
    Replies
    1
    Views
    311

    do feed issue

    Hi Guys

    Got Customer with Canon IRC1225iF multifunction printer/copier. This is there third machine. Other two have been exchanged by Canon. Each machine has the same fault. When scanning or...
  12. Replies
    5
    Views
    1,049

    Re: fuser reset chip

    If u can help would b appreciated. Is it a reset procedure you can reply to in this thread or is it the reset chip and where it can b obtained.
    Thanks again
  13. Replies
    5
    Views
    1,049

    Re: fuser reset chip

    Afraid not. Machine just sitting on shelf gathering dust!!
  14. Replies
    2
    Views
    431

    Re: lamp adjustment

    Yes Yes. Of course. Should have thought of that. Many thanks for the help. Will set it next time l see him
  15. Replies
    2
    Views
    431

    lamp adjustment

    Hi Guys

    Is it possible to adjust the density on MP2000. I have an "OLD" Customer who loves his machine but struggles using the manual adjust. He copies loads of newspaper clippings and it is too...
  16. Replies
    5
    Views
    1,049

    fuser reset chip

    Hi Guys

    Can anyone help with a part for Lexmark C792 colour laser printer. We have one in stock which is in perfect condition but is asking for fuser to be replaced neven though it is in good...
  17. Thread: ricoh mpc2051

    by stobby2
    Replies
    2
    Views
    405

    ricoh mpc2051

    Anyone know if the fuser for the Ricoh mpc2050 is the same as the mpc2051?
  18. Thread: sc565

    by stobby2
    Replies
    6
    Views
    489

    Re: sc565

    [QUOTE=chris2882;709013]pressure poller thermostats have had it many times part # AW11-0055[/QUOTE
    Thanks for the advise and part number. Ordereded today
  19. Thread: sc565

    by stobby2
    Replies
    6
    Views
    489

    Re: sc565

    thanks for that. I will make to note and thanks for the help
  20. Thread: sc565

    by stobby2
    Replies
    6
    Views
    489

    Re: sc565

    cheers guys. Advise as always appreciated. Parts ordered today
  21. Thread: sc565

    by stobby2
    Replies
    6
    Views
    489

    sc565

    Anyone had this error SC565?

    New one for us as it does not appear when machine switched on, only when cooling down. Can run 100 prints/copies and more and all works fine but after print has...
  22. Thread: compatibility

    by stobby2
    Replies
    2
    Views
    435

    [Misc] Re: compatibility

    Clever!!. I didn't think of that. Easiest solutions are quite often the most obvious. Will give that a try

    thanks for the reply
  23. Thread: compatibility

    by stobby2
    Replies
    2
    Views
    435

    [Misc] compatibility

    We have a Customer with an old Ricoh MP201 desk top copier. Takes 1270D toner l believe. They have run out of toner and desperate to get it running. We do not have stock of this but we have the...
  24. Thread: error

    by stobby2
    Replies
    2
    Views
    699

    Re: error

    Cheers Buddy. Will have a look tomorrow and see if it helps

    Thanks again. This is a great site. Helped us out on numerous occasions
  25. Thread: error

    by stobby2
    Replies
    2
    Views
    699

    error

    Hi Guys

    Got a weird one with an HP X451 printer. Came up with Error Code OXC18A000A. Havn't seen this one before. Is it Easy to fix or scrap it?. Any ideas appreciated

    UK Rog
Results 1 to 25 of 128
Page 1 of 6 1 2 3 4