Search:

Type: Posts; User: mga

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    21
    Views
    1,113

    Re: Technical Service and Support (Octopus)

    Octopus is the replacement site from my-ricoh it's much better links to office 365 so no passwords you can setup for any model automate notifications so you are always up to date with RTB'S firmware...
  2. Thread: IMC3500 Duplex jam

    by mga
    Replies
    14
    Views
    313

    Re: IMC3500 Duplex jam

    Can't see that would be the controller board but if that's what they say. Also put the original right door but on as the one on there looks like it's done more then 5k
  3. Replies
    5
    Views
    127

    [Error Code] Re: Pro C5100 - SC401-01

    You can't just swap over pcdus from other machines on production they need to be setup correctly
  4. Replies
    3
    Views
    104

    [Misc] Re: E25c Fiery Software

    This one does come with usb or disks you are ment to do backup on installation just follow manual and do a factory reset make sure it connected to copier follow service manual quite easy
  5. Replies
    8
    Views
    162

    Re: ricoh mp c3003 - error sc665-02

    +1
  6. Replies
    8
    Views
    162

    Re: ricoh mp c3003 - error sc665-02

    SC665-02 D BCU - imaging IOB connection errorSC display

    Try removing toners strange code could be rubbish toner chip
  7. Replies
    16
    Views
    456

    Re: mpc6004ex only one impression

    The sleeve assy is 400k if oem complete assy not just fit sleeve film on it own Ie compatible that could cause double image as well as rubbish toner
  8. Replies
    10
    Views
    252

    Re: Pro C 7100 Fiery E43a system DVDs

    Talk to copier tech CTN user I am sure he can help
  9. Replies
    10
    Views
    252

    Re: Pro C 7100 Fiery E43a system DVDs

    E24b is on there
  10. Replies
    10
    Views
    252

    Re: Pro C 7100 Fiery E43a system DVDs

    I think now you can download from ricoh new site octopus try copier tech CTN user
  11. Thread: Greenville SC

    by mga
    Replies
    6
    Views
    136

    Re: Greenville SC

    Hello
  12. Replies
    16
    Views
    456

    Re: mpc6004ex only one impression

    1st problem easy media mismatch error install correct driver turn on auto continue in printer setting.

    2nd problem be good to see samples probably rubbish toner and or paper type settings
  13. Replies
    4
    Views
    198

    Re: MP C3002 Toner Cartridge Setting Error

    RFID pwb probably damaged check pins are not bent if looks OK try replacing
  14. Replies
    13
    Views
    442

    Re: Firmware update for Canon IR ADV C5051

    I don't think the irac50xx is know longer available on control panel also the machine needs to be registered with E maintenance I find it much quicker to use USB most guys I know carry the most...
  15. Replies
    7
    Views
    281

    Re: Ricoh MP 3053 side door issue

    This is common the arm bracket assy in the fuser unit is most likely bent damaged
  16. Replies
    17
    Views
    469

    Re: sc670_01 SC670_02 ricoh mpc307SPF

    Did you check for the flashing lights as service manual advised
  17. Thread: IR 2230 E602.

    by mga
    Replies
    8
    Views
    178

    [Error Code] Re: IR 2230 E602.

    Anytime if ever need any thing urgently just pm or send email take care
  18. Thread: IR 2230 E602.

    by mga
    Replies
    8
    Views
    178

    [Error Code] Re: IR 2230 E602.

    Hi copier tech I've can see it on sims what do you need I will download and add to my site
  19. Replies
    7
    Views
    257

    [Jamming] Re: Ricoh MPC6503 (Charis) - Jam code 025

    If intermittent jam could be exit sensor starting to go down try swapping with paper transport sensor
  20. Replies
    17
    Views
    469

    Re: sc670_01 SC670_02 ricoh mpc307SPF

    Same here on metis customer had oem toner so I thought I order the pwb was still the same replacement of new oem toner sorted problem I've even had oem toner with a missing chip in sealed box.
  21. Replies
    17
    Views
    469

    Re: sc670_01 SC670_02 ricoh mpc307SPF

    I've had this and it was a compatible toner try another bottle oem would be best
  22. Re: mpc3003 offset (ghost image) after sleeve unit replaced

    Yes covers mpc3003 3503 4503 5503 6003 you need to make sure you you set for mpc3003

    Also do this
    3612-131-132-133-134 K.,C,M&Y
    SET ALL TO 600
  23. Replies
    6
    Views
    208

    [Jamming] Re: MPC 5000 tray 2 Guid plate

    Can't you just unhook the front bracket so the duplex assy lowers pretty sure you don't have to remove door completely
  24. Replies
    8
    Views
    284

    Re: mpc3002 ADF3060 firmware request

    What is the problem with df why do you think you need it I can send you a complete romdata folder for your machine there's about 20 fwu files on it I didn't see your firmware file number
  25. Re: mpc3003 offset (ghost image) after sleeve unit replaced

    Hope this helps
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4