Search:

Type: Posts; User: mloki

Search: Search took 0.07 seconds.

  1. Replies
    2
    Views
    127

    Re: xerox 700 print smudge / displacement.

    Hi Phil,

    I've tried two fusers and just had the IPB belt replaced about a month ago and have printed about 500, 40 page full colour booklets without an issue. I'll get back to you with a page...
  2. Replies
    2
    Views
    127

    xerox 700 print smudge / displacement.

    Hi all,

    My xerox 700 was printing fine until it printed the following image. All prints come out the same since then. Just seeing if anyone has had this issues or can help me fault find it....
  3. [Misc] Re: xerox 700 dcp not printing magenta after replacing drum.

    InterfaceP, yep it was the developer material. I appreciate all of your help.
  4. [Misc] Re: xerox 700 dcp not printing magenta after replacing drum.

    I'll get some and let you know how it goes. Thanks for all of your help. :)
  5. [Misc] Re: xerox 700 dcp not printing magenta after replacing drum.

    Hi mate, you can see the full auger with hardly no toner in there. The toner cartridge was changed not long before the drum change and is pretty much brand new. It was working before I changed the...
  6. [Misc] Re: xerox 700 dcp not printing magenta after replacing drum.

    Hi InterfaceP,

    the connectors and springs look fine. When I get under the developer/drum drawer with both magenta and yellow drums out, on the yellow developer when I spin the left hand side gear...
  7. [Misc] xerox 700 dcp not printing magenta after replacing drum.

    Hi, my xerox 700 was working perfectly until I got a message that the yellow and magenta drum needed replacing. I replaced both drums and the magenta does not print. Swapped the two drums around,...
Results 1 to 7 of 8