Search:

Type: Posts; User: mikadonovan

Page 1 of 20 1 2 3 4

Search: Search took 0.95 seconds.

  1. Replies
    2,093
    Views
    171,076

    Re: Latest on the Corona Virus

    Lol. I thought the same thing after reading the article. Not saying it's not true, its just all over the place. Not great journalism in my opinion.
  2. Replies
    5
    Views
    161

    Re: Windows update

    By golly, that's going to save me a lot of time, thank you. I'm gonna give you a rep bump.
  3. Replies
    5
    Views
    161

    Windows update

    Just a FYI, I lost some data on the last Microsoft Win 10 update (thankfully I had a backup), and I just noticed that ALL of the printers in the office had been changed from a standard IP port to a...
  4. Replies
    19
    Views
    593

    Re: MPC3003 NETWORK ISSUE.

    When I have ran unto this in the past, it almost always has been a change in the network/internet service, like going from a 192.168.xxx.xxx structure to a 10.10.10.x structure. I just delete the...
  5. Replies
    9
    Views
    335

    Re: Ricoh Mpw 2400 CIS

    Enter sp mode, hold the "#" key and select the system tab.
  6. Re: Mpc4502a With single pass feeder sc700-00

    Not too baffling. Replace the sensors, including the upper limit sensor located at the rear side of the adf on the frame. You can see it when you open the adf cover. The lift table moves up, lifts...
  7. Replies
    15
    Views
    535

    Re: C6004ex back up a software application

    You need to follow the exact procedure in the manual for the controller replacement. It is about 3 pages long and it covers the backing up of nvram and address book data, and the installation of both...
  8. Re: Mpc4502a With single pass feeder sc700-00

    Replace the sensors under the lift table as the code indicates the problem is there. I'm not sure why you are ignoring the specific code. Ricoh internal diagnostics are pretty good these days. I have...
  9. Replies
    9
    Views
    335

    Re: Ricoh Mpw 2400 CIS

    It may be in SSP. That excerpt is from the manual.
  10. Replies
    9
    Views
    335

    Re: Ricoh Mpw 2400 CIS

    Did you do this?
  11. Replies
    6
    Views
    130

    Re: SR 3170 Stapler Harness

    I'm glad I don't need it then. A P-P for this would be hard for me to find. I wonder why in the world would they put any part numbers on a P-P instead of the parts catalog where all the other parts...
  12. Replies
    6
    Views
    130

    SR 3170 Stapler Harness

    Hi, All. I have a malfunctioning stapler on this booklet finisher (it staples, but it always says"add staples"). Tried 2 different staples carts that are fine in another 3170. Sooo, I need to get...
  13. Re: Ricoh MP C307 cant print or scan to memory device

    I originally had trouble getting this to work, too. This procedure must be followed: From scanning screen, select the store file tab at the top. Select store to memory device, then select OK. NOW...
  14. Replies
    27
    Views
    750

    [Misc] Re: Ricoh mp2501

    Clean the machine's air/ozone filters, and the ID sensors. Do a forced toner supply till the image looks like you want it, then reset developer again. If the forced toner supply does not increase the...
  15. Re: The card authentication device is not connected

    Might check sp 5985-002.
  16. Replies
    257
    Views
    64,976

    Re: Any stargazers out there...?

    Good info. It's nice to see a post that sticks with the spirit of this thread.
  17. Replies
    11
    Views
    562

    [Misc] Re: RICOH AFICIO MP C3001 Image problem

    Before you do that, since it is affecting ALL colors, could be an ITB issue, or paper transfer roller problem.
  18. Re: Ricoh CW2201 Wide Format - Jam Code 041, Paper Jam in "B"

    Yes, it's no big deal. Just follow the procedures in the manual. You might clean it before replacing it.
  19. Re: Ricoh CW2201 Wide Format - Jam Code 041, Paper Jam in "B"

    It sounds like there is still paper under the printhead area right side. Do a hard boot on the machine and then see if you can slide a piece of cut paper along that area and see if there is any...
  20. Re: Mpc4502a With single pass feeder sc700-00

    That's easier said than done with the SPDF, but if you do, be prepared for the rain of paper clips and old staples.:)
  21. Re: Looking for updates on those here that are rebuilding the mpc3503/04 drum units

    I have experienced early failure on these. I could only do B&W scan to keep the file size under the limit, and it doesn't look too good.
  22. Re: Setting for counting Duplex and legal copies as 2 clicks

    I believe it is in SSP. After accessing the sp mode, hold down the "#" sign and select system tab.
  23. Replies
    9
    Views
    330

    Re: mpc5503 with sc541-02

    Why don't you just replace the non contact sensors?

    37.AW100150
    NON-CONTACT TY
    PE THERMISTOR:
    NC-F10:MIDDLE


    38.AW100151
    NON-CONTACT TY
  24. Replies
    1
    Views
    171

    Re: Scan via USB to PDF

    No. Ricoh MFP's can scan to PDF's also over a network.
  25. Re: Those $#%@#% foam rollers on ricoh finishers.

    That is an excellent idea.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4