Search:

Type: Posts; User: mrwho

Page 1 of 20 1 2 3 4

Search: Search took 0.69 seconds.

  1. Replies
    19
    Views
    594

    Re: MPC3003 NETWORK ISSUE.

    Also some customers with security in mind just go and flip every switch that vaguely resembles "stronger security", and then are surprised when the machine stops printing and scanning.
  2. Replies
    19
    Views
    594

    Re: MPC3003 NETWORK ISSUE.

    This.

    I usually also try to lower the machine's network speed from 100mbps to 10mbps - if it helps, then it's a cabling/conector/switch problem.
  3. Replies
    27
    Views
    798

    Re: Mpc4502a With single pass feeder sc700-00

    It's some webpage with manual pages - though it probably has ads of some sort...
  4. Replies
    27
    Views
    798

    Re: Mpc4502a With single pass feeder sc700-00

    I never had to replace one of those, so I'm not sure, but it looks to me it's the stepper motor mentioned here. You need to look at it and compare to the one you have.
  5. Replies
    4
    Views
    192

    Re: Default lock print only - SP5710dn

    I used to use the Printer Driver Editor (antecessor of the Printer Driver Packager) and it worked nicely. If you can't get it to work with that, I can give it a go if you want (assuming the driver is...
  6. Replies
    7
    Views
    260

    Re: Default Scanner File Type

    You're right, my bad. I had misread it.

    Always nice from Ricoh to spread stuff over different mediums (not!). Separate PDFs on the same folder I can understand, but having to skim through PDFs,...
  7. Re: Ricoh MP4055 japanese language after replacing NVRAM In IOB Board

    Thank you for the feedback.
  8. Replies
    7
    Views
    260

    Re: Default Scanner File Type

    Page 53 of the user guide.
  9. Replies
    11
    Views
    325

    Re: mpc 5502 double imaging

    If it doesn't do it in color, then it most likely is not a mechanical problem - I'd wager on some adjustment that applies only to K prints.

    Try to back up the NVRAM, clear the engine settings and...
  10. Replies
    12
    Views
    370

    Re: MP 301 False Add Toner

    - I assume the machine asks for toner while the bottle is still not empty

    - The motor you mention is the toner motor?

    - If you reset the error with SP2928, does the machine work okay (good...
  11. Re: Ricoh MP4055 japanese language after replacing NVRAM In IOB Board

    Enter Factory Mode (you should know how, I guess) and change SP 5996-1 to your area (Europe would be 3).
  12. Re: Ricoh MP4055 japanese language after replacing NVRAM In IOB Board

    Isn't that the "Exit" or "Return" button?
  13. Replies
    12
    Views
    507

    [Electrical] Re: Machine cannot power ON

    Would be nice to know what the fix was, it could help someone else.
  14. [Dead] Re: Ricoh mpc 3001 with lcd screen not lighting up just various red and green indicat

    You can't post about two different machines with different symptoms on the same thread.

    One thread - One machine!
  15. Thread: SC285 Pro C5100

    by mrwho
    Replies
    11
    Views
    700

    [Error Code] Re: SC285 Pro C5100

    I know - what I meant with "it didn't work" is that it didn't solve my problem. But it did help me in other cases (namely a Pro8300 that had the ITB constantly crawling to one side - here, and I just...
  16. Replies
    7
    Views
    685

    [Error Code] Re: Pro8300 with recurring SC471-05

    Thanks to another thread that reminded me of this one - after reseting the engine and reentering the non-standard data, the machine has been working okay since then.

    It's solved! Thanks all!
  17. Thread: SC285 Pro C5100

    by mrwho
    Replies
    11
    Views
    700

    [Error Code] Re: SC285 Pro C5100

    There's a mention of that in the service manual, so I tried it too - didn't make a difference. But yes, I believe that if the values are too far away from standard will stop the engine from...
  18. Replies
    18
    Views
    787

    Re: Political Compass

    46307
  19. Thread: SC285 Pro C5100

    by mrwho
    Replies
    11
    Views
    700

    [Error Code] Re: SC285 Pro C5100

    Had that same problem and it went away on its own. Details here.
  20. [Misc] Re: SP2194 and MUSIC Execution Results - Where's the table?

    Status update: After leaving the machine turned on overnight, the problem is gone.

    It's a return machine that now sits in the showroom, so I guess that a mixture of handling it over and then...
  21. [Misc] Re: SP2194 and MUSIC Execution Results - Where's the table?

    The SMC history tool is a great tool, but shouldn't replace the SP codes explanation on the service manuals...
  22. [Misc] Re: SP2194 and MUSIC Execution Results - Where's the table?

    Thank you, I did assume so - ordered all that. Thanks again.
  23. [Misc] SP2194 and MUSIC Execution Results - Where's the table?

    Hello there.

    I'm having MUSIC and line position adjustment troubles on a C5100 - I'm ordering the ITB and bias roller (following TonerMunkeh's advise not directed at me, but still good advise) as...
  24. Thread: SC285 Pro C5100

    by mrwho
    Replies
    11
    Views
    700

    [Error Code] Re: SC285 Pro C5100

    Has the problem been solved? If so, how?

    Thank you.
  25. Replies
    147
    Views
    63,493

    Re: RICOH copeir monthly auto meter

    escusado - nunca recebi nada.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4