Search:

Type: Posts; User: wcanonw

Page 1 of 6 1 2 3 4

Search: Search took 0.04 seconds; generated 22 minute(s) ago.

  1. Replies
    8
    Views
    2,560

    [Dead] Re: Ir adv 8105 display black

    Hi, how did you give it a solution?
  2. Thread: Fuser Grease

    by wcanonw
    Replies
    13
    Views
    1,890

    Re: Fuser Grease

    thanks :cool:
  3. Replies
    9
    Views
    752

    Re: C5035 Copy Quality

    the problem is in plain paper or heavy paper
  4. Thread: Fuser Grease

    by wcanonw
    Replies
    13
    Views
    1,890

    Re: Fuser Grease

    hello a question, how much molikote fat has to be put inside the fixing film :rolleyes:
  5. Replies
    9
    Views
    913

    Re: Ir adv c55## adf scan copy skew

    Your problem in this case is due to poor paper feed (paper wheel or rollers), check and clean the state of each, also check the paper transport rollers, because most new models of copiers their DADF...
  6. Replies
    9
    Views
    913

    Re: Ir adv c55## adf scan copy skew

    In copying and duplex scanning does the same problem occur?
  7. Replies
    9
    Views
    913

    Re: Ir adv c55## adf scan copy skew

    Check if the paper size guide is well positioned or analyze the paper path. There should be some foreign object or defective guide in the adf and copy glass, which causes the sheet to move a little....
  8. Replies
    5
    Views
    436

    Re: canon ipf 680 03800500-2f47 error

    the ink cartridges are original?
  9. Replies
    5
    Views
    436

    Re: canon ipf 680 03800500-2f47 error

    if the problem persists rule out with carriage pcb or main board
  10. Replies
    5
    Views
    436

    Re: canon ipf 680 03800500-2f47 error

    hello in service mode you must delete the spindle error history, also check the firmware version if it is an old firmware try to update to the latest firmware version:rolleyes:
  11. Thread: E0051-0001

    by wcanonw
    Replies
    20
    Views
    6,351

    [Error Code] Re: E0051-0001

    hello when you refer to the three changed duplex units, do you mean that you have changed the (fixing / feeding unit) ????.
    You can send a photo of a duplex unit to which you mention ...:confused:
  12. Replies
    3
    Views
    404

    Re: Canon ir5075 error code e225-001

    check if the scanner scanning lamp turns on when the printer is turned on, see if the scanner moves
  13. Replies
    3
    Views
    404

    Re: Canon ir5075 error code e225-001

    The scanning lamp (xenon tube) is defective. The inverter PCB
    it is defective. The PCB CCD / AP PCB is defective. The controller PCB
    of the reader is defective
  14. Replies
    4
    Views
    496

    [CQ] Re: IR-ADV 8285 PRO

    before that problem appeared, did they change any spare parts?
  15. Replies
    3
    Views
    404

    Re: Canon ir5075 error code e225-001

    hello did you do what the service manual indicates about the error code?:rolleyes:
  16. Replies
    5
    Views
    813

    [Dead] Re: Canon C5235i Stuck In Start Up

    hello good morning, you tried to discard with the main controller pcb1 and main controller pcb2, relay pcb.
    If the printer restarts possibly due to some short circuit of any component, remove the...
  17. Replies
    8
    Views
    1,847

    Re: Canon IR Advance 6255 firmware

    buy an ir6275 and sell it as ir6275:)
  18. [Misc] Re: Canon IR C5235 - start network failed after firmware update.

    you would have to get the signature version of the year 2012 and format the hdd using the service mode or the hdd format option when you install the firmware using pendrive.
    the other would be to...
  19. [Misc] Re: Canon IR C5235 - start network failed after firmware update.

    disable DHCP:rolleyes:
  20. [Misc] Re: Canon IR C5235 - start network failed after firmware update.

    hello on the printer when configuring the ip address, gateway, subnet mask, primary dns and secondary dns:rolleyes:
  21. Replies
    10
    Views
    1,477

    [Error Code] Re: Canon IPF670 Printhead Error Problem

    I was going to update the firmware, check on the main canon page and the version of the firmware that the plotter has is the last one on the canon usa website :(
  22. Replies
    10
    Views
    1,477

    [Error Code] Re: Canon IPF670 Printhead Error Problem

    whit compatible ink
  23. Replies
    10
    Views
    1,477

    [Error Code] Re: Canon IPF670 Printhead Error Problem

    attached photos of the plotter canon ipf670
  24. Replies
    10
    Views
    1,477

    [Error Code] Re: Canon IPF670 Printhead Error Problem

    yes compatible ink
  25. Replies
    10
    Views
    1,477

    [Error Code] Re: Canon IPF670 Printhead Error Problem

    The seller sent his technician, the technician made a hole in one of the continuous system ink cartridges and ended up blaming the customer and plotter users, to get rid of the warranty, I told the...
Results 1 to 25 of 135
Page 1 of 6 1 2 3 4