Search:

Type: Posts; User: blackcat4866

Page 1 of 20 1 2 3 4

Search: Search took 0.15 seconds.

  1. Re: Lexmark MS 310d error and paper jam lights blinking

    Did your "anywhere" researches include the service and user manuals? =^..^=
  2. [Jamming] Re: Copystar CS 3050ci Jam 0000 error please help..

    If you've got this far, you're through the worst of it. There's a lot of spring tension on the secondary transfer unit.

    When you're assembling leave the springs for last. The springs will insert...
  3. Replies
    10
    Views
    384

    Re: Konica minolta 454 and 364

    Just out of curiosity, have you tried fresh paper? High humidity in the paper can cause poor transfer ... but it's the first side that comes out faint. The fuser dries the paper somewhat, making the...
  4. Replies
    10
    Views
    384

    Re: Konica minolta 454 and 364

    What do these images look like?:
  5. Replies
    5
    Views
    253

    Re: KM bizhub C458e 32-05 jam

    I'd start with PS3, or possibly a seizing fuser. =^..^=
  6. Replies
    20
    Views
    2,313

    Re: a61ffw.tar for bizhub 754/754e/654/654e

    I've found that using the MFP reset tool often necessitates getting the CE password reset. =^..^=
  7. Replies
    6
    Views
    494

    Re: noise.....

    The auger assembly on the back is 302L794023
    The waste bottle rotater assy is 302ND94224

    If it backs up at the bottle assy you'll need both.
    If by some fortunate accident it backs up in the...
  8. Replies
    5
    Views
    310

    [Error Code] Re: konica minolta 3320 "tray 1 missing"

    What have you done so far? =^..^=
  9. [CQ] Re: TA 4550ci Can you shine fusing sleeve to make last longer with fuser sleeve oil

    If you've got a weird fusing issue, you might take a look at the power coming in. I struggled with a KM-3051ci with a strangely intermittent fusing issue. After changing the fuser twice, the IH coil,...
  10. Replies
    6
    Views
    494

    Re: noise.....

    I'm inclined to agree with you. Pull off those covers and fire it up. You should be able to pinpoint the source pretty quickly. It's a common failure ... the waste toner collection system that is....
  11. Replies
    5
    Views
    197

    Re: hey peeps!

    Welcome! =^.^=
  12. Re: Ecosys M5526 stripes after removing jammed paper

    One of the developing units is arcing to it's drum. When it does, the HVT shuts down for a fraction of a second, making one crossfeed bar of each yellow/cyan/magenta/black. When it happens...
  13. [For Sale] Re: Top 12+ cách quan hệ lâu ra sướng nhất không phải ai cũng biết

    Vietnamese supplier of Viagra.

    SPAM
    =^..^=
  14. Replies
    5
    Views
    260

    Re: E Studio 25s / Fuser unit

    I sent one to the junkheap 4 years ago for the fuser. It was the first I've ever seen. =^..^=
  15. Replies
    5
    Views
    260

    Re: E Studio 25s / Fuser unit

    I can probably help out with the manuals, but there isn't much hope that you'll find any parts. Send me a PM with destination.
    =^..^=
  16. [Misc] Re: user trying to scan a check and it shows up blurry? all other scans work fine.

    Yes, it's called prohibited originals or counterfeit protection. It also applies to currency, stocks, bonds, and other financial instruments. A couple of typical ways around this are:

    1) select...
  17. Replies
    3
    Views
    312

    Re: help about kyocera taskalfa 3051 Ci

    Can you further define: "not working"?
  18. Replies
    30
    Views
    1,808

    Re: 8518A C471 error

    By the time they turn that color brown, they're getting pretty brittle and don't have much time left before they shatter. It's a good idea though. =^..^=
  19. Replies
    17
    Views
    901

    Re: C-258, unable to load firmware...

    You're right about one thing: I don't spend a lot of time assuming and guessing when there isn't much information to work with ... not even the firmware level. I try to follow the KISS Principal at...
  20. Replies
    17
    Views
    901

    Re: C-258, unable to load firmware...

    Are you aware of the red Stop button? I recommend that you take a glance a the "Firmware" section of the manual. =^..^=
  21. Replies
    1
    Views
    174

    [Error Code] Re: LexmarkMS610 DN 111.30 error

    Well, clearly you disturbed something in the process of cleaning.

    If it were me, I would remove & re-do everything I already did with the laser. Make sure all the connectors are made (especially...
  22. Replies
    11
    Views
    657

    [Misc] Re: BH c224e vs 454e for small office

    Make prints of these documents & scan them back to this post. I can offer better information then:
  23. Replies
    35
    Views
    1,619

    Re: Kyocera 3645 not grabbing an IP address.

    We saw this a lot when the first Gigabyte NIC's came out. Most of our customers were still running 100MB network routers, and the MFP did not always accurately choose the correct network speed,...
  24. Replies
    4
    Views
    434

    Re: Kyocera 6635cidn error code 4600

    Yeah, it's a failure of the laser slit glass cleaner to complete it's cycle. It's the same mechanism on Genesis, Mebius, & Mebius II. There are several reasons why this might occur:

    I had a...
  25. Replies
    11
    Views
    657

    [Misc] Re: BH c224e vs 454e for small office

    Either of these models are reliable ... and a good choice. And reasonable at $600. But be prepared to put some money in them when they arrive. At $600 there will be things to fix. =^..^=
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4