Search:

Type: Posts; User: deputydogg

Page 1 of 6 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    0
    Views
    58

    IPF8400S error

    Machine first had 03130031-2F50 so I replaced right printhead which it worked for most of the day then they called back and now has 03130031-2F23. What does this indicate, are they related ?
    Thanks,...
  2. Replies
    1
    Views
    57

    Okidata ML320 turbo

    Does anyone have a used or refurbished Oki ML 320turbo or similar for sale?
    Thanks
  3. Replies
    6
    Views
    328

    Re: DP C262 E326 error

    I put the drums back in that were in it originally but they are not OEM either. I'm not sure its worth it to buy OEM drums, if they are still available.

    Do you remember if there was a code to run...
  4. Replies
    6
    Views
    328

    Re: DP C262 E326 error

    I'm not sure but they are not OEM.
    Thanks,
    Dave
  5. Replies
    6
    Views
    328

    Re: DP C262 E326 error

    All of the drums seem to turn freely by hand, new & old ones. Is there a output code to run the drums in service mode ? I ran ďdeveloping motor 1&2Ē , all toner motors, transfer belt motor and they...
  6. Replies
    6
    Views
    328

    DP C262 E326 error

    Machine displaying E326, customer says they replaced all drums and still getting message. I'm not too familiar with Panasonic so just trying to get a heads up before I go out. Any suggestions ?...
  7. Replies
    2
    Views
    164

    HL3170 part #

    Can you get the upper fuser roller separately, if so whatís the part # ?
    Thanks,
    Dave
  8. Replies
    0
    Views
    180

    Oki 320 turbo issue

    The customers old computer crashed which they were using a ML 182 to print invoices. Their new computer doesnít have parallel so they bought 320turbo with usb. After printing the first page it does...
  9. Thread: M2040DN

    by deputydogg
    Replies
    4
    Views
    301

    M2040DN

    Would this be a good machine to place in a convenience store for self service copies ?
    I thought this may better than something with a touch screen such as M3145.
    It's hard to find something that...
  10. Thread: Bizhub 4422

    by deputydogg
    Replies
    0
    Views
    171

    Bizhub 4422

    Customer has 3 of these and says that about every 4-6 weeks the paper settings have to be reset. Does it do some kind of update that can be turned off ?
    Thanks,
    Dave
  11. Replies
    14
    Views
    5,564

    Re: Brother fuser film grease

    I have a customer that has a DCP-8155 with 575K on it, I use UniFlor 8172 Fixing film grease which usually last 6-8 months. I think I have changed the fuser unit 3 times. They love the machine and...
  12. Re: Okidata MPS3537 vs Toshiba E-studio 347CS

    I was able to get them reset with new fuses.
    Thanks,
    Dave
  13. Replies
    2
    Views
    226

    Re: OKI CX2731 error

    Do you have any info you could send me for the service mode on this model ?
    Thanks,
    Dave
  14. Replies
    2
    Views
    226

    OKI CX2731 error

    Machine had a paper jam, customer removed paper which had not made it to drums yet, now it shows 381 ERROR. All paper sensors are in place, no paper anywhere. Does this indicate a particular sensor ?...
  15. Replies
    2
    Views
    276

    E-studio 347CS vs Okidata MPS3537mc

    Our customer has the oki mps3537, C,Y,M drums are near end of life. None of our vendors have them or an eta . I tried a yellow Toshiba drum but it would not reset the drum message. I know most oki's...
  16. Okidata MPS3537 vs Toshiba E-studio 347CS

    Our customer has the oki mps3537, C,Y,M drums are near end of life. None of our vendors have them or an eta . I tried a yellow Toshiba drum but it would not reset the drum message. I know most oki's...
  17. Replies
    10
    Views
    768

    Re: MX-M365 black lines

    The drum blade is new as well as the drum. The blade is clear. The new drum/blade made absolutely no difference in print/copy quality.
  18. Replies
    10
    Views
    768

    Re: MX-M365 black lines

    The fuser rollers look fine. I canít see anything on the mag roll that looks bad in the area of the lines, not to say itís not bad. I didnít think there was much else it could be.
  19. Replies
    9
    Views
    684

    Re: MX-M365 adf issue

    I took ADF covers off , blew out all sensors, wrapped spring another round. No issues since.
    Sorry for the delay.
    Dave
  20. Replies
    10
    Views
    768

    MX-M365 black lines

    The customer bought this as an off lease machine. Only has 135k on it. They are now getting black lines in the direction of paper feed, they get worse the more you run, copy or print. I assumed it...
  21. Replies
    9
    Views
    684

    Re: MX-M365 adf issue

    I have not yet, but I will Monday.
    Thanks
  22. Replies
    9
    Views
    684

    MX-M365 adf issue

    Randomly when you put a document in the document feeder it says open cover and remove jam. Opening and closing the ADF cover doesnít always clear the code. It almost seems like there is an issue with...
  23. Replies
    4
    Views
    423

    Re: Toshiba e232 part

    That is the part. Thanks for checking.
    Dave
  24. Thread: E232 part

    by deputydogg
    Replies
    1
    Views
    248

    Re: E232 part

    Bueller,Bueller...
  25. Replies
    4
    Views
    423

    Re: Toshiba e232 part

    Nobody ???
Results 1 to 25 of 143
Page 1 of 6 1 2 3 4