Search:

Type: Posts; User: anothertech

Page 1 of 20 1 2 3 4

Search: Search took 0.05 seconds.

  1. Replies
    8
    Views
    172

    Re: MP9003 J015 jams on exit

    Talking nice to it might help, well it couldn't hurt.
  2. Replies
    13
    Views
    485

    Re: Ricoh MP2352 SC401- Strange problem

    Maybe the computer sending the problem is set for heavier paper, causing the MFP to up the transfer voltage and then it shorts out.
  3. Replies
    21
    Views
    1,021

    Re: MP 9001 browse network error

    There is custom firmware for this model in the US to fix this problem, but I don't know if there is custom firmware for this techs location(Spain)
  4. Replies
    21
    Views
    1,021

    Re: MP 9001 browse network error

    If you are desperate, backup the address book on one of the other machines that work, then use that machine to build the address book you need, then transfer the address book from that machine to the...
  5. Replies
    24
    Views
    1,005

    [Misc] Re: Ricoh 6054 Printing question.

    I got this from another forum, worth a try? I would add, update Java.


    Did you try a complete PCC uninstall, Java uninstall and flush procedure? For machines with Java installed on controller...
  6. Replies
    24
    Views
    1,005

    [Misc] Re: Ricoh 6054 Printing question.

    Try updating the driver, if that doesn't help switch to one of Ricoh's other drivers. Make sure they're not using the Ricoh class driver, also check to see what printer port they are using. The WSD...
  7. Replies
    7
    Views
    253

    Re: Aficio MP C3002 - part number

    49697
  8. Replies
    7
    Views
    253

    Re: Aficio MP C3002 - part number

    Item 13 49696

    Or it could be a bad hard drive.
  9. Replies
    41
    Views
    5,507

    Re: MP301 PCU's failing constantly

    Sorry, I lost track, I thought everyone was still talking about MP301.
  10. Replies
    41
    Views
    5,507

    Re: MP301 PCU's failing constantly

    Ricoh has a new PCDU. The new PCDU has improved sealing so that the developer does not leak.
  11. Replies
    41
    Views
    5,507

    Re: MP301 PCU's failing constantly

    Ricoh came out with a modified MP301 drum unit a while back, D1272212. Haven't had any fail yet, we'll see.
  12. Replies
    5
    Views
    323

    Re: C4502 jammed in c , no paper anywhere

    Come on digicor, you've got over 900 previous post, you should know you've got to tell the jam code. Ask the customer for it when you have them on the phone.
  13. Replies
    9
    Views
    428

    Re: Ricoh MP C3504 Nameplate

    I found this, looks worth a try,

    Where can I get a Ricoh Emblem or Name Plate?

    The Ricoh Brand Emblem for this model can only be obtained from Ricoh Inventory Control. To obtain a new Emblem...
  14. Replies
    10
    Views
    656

    [Jamming] Re: Ricoh MPC6503 (Charis) - Jam code 025

    What are the part numbers you had to replace?
  15. Re: customer complaining about fan cycling on and off on a MPC4503

    I'm still assuming it's not normal, other Ricoh models don't do it. If anyone reading this goes on an MP C4503, listen closely to see if it's doing it.
  16. Re: customer complaining about fan cycling on and off on a MPC4503

    We had one in our office doing the same thing. I don't know if they all do it, or maybe it was just that one. I have looked through user tools and service mode for what seemed like hours, didn't find...
  17. Replies
    10
    Views
    758

    [Misc] Re: Ricoh MP2555 and MP4055 series

    The message to replace the fuser sleeve will come on when the part hits the PM count, but I usually just reset the PM counter and leave it to continue running. I can't see replacing good parts just...
  18. Replies
    16
    Views
    715

    Re: MPC307spf - Dead as a doorpost - SOLVED

    Get a good surge suppressor on that thing.
  19. Replies
    13
    Views
    767

    Re: Next generation MP 301

    The MP301 PCU's usually don't make yield, although they did just come out with a new style PCU, jury is still out on that.

    MP401 and MP402 PCU's go the distance. Make sure you have the current...
  20. Replies
    13
    Views
    767

    Re: Next generation MP 301

    I've got about ten MP 305's out at a nursing home. They've been good machines. They are small machines but one good little extra about them is they can run 11x17 through the ARDF and the bypass tray.
  21. Replies
    13
    Views
    767

    Re: Next generation MP 301

    The MP 401's and 402's have turned out to be great machines. Updated firmware and the new style drums have solved the early issues.

    The 401's have the older style display like the 301's, they're...
  22. Replies
    14
    Views
    642

    Re: MP C3002 jam

    Oh, good to hear. Go into IO mode and see what sensor is causing the problem.
  23. Replies
    14
    Views
    642

    Re: MP C3002 jam

    I'm figuring he's an end user, probably won't know how to use service mode.
  24. Replies
    5
    Views
    270

    Re: MPC3004 and MPC3004ex

    I remember that one, what a pain. Ricoh has so many different but similar toners, it's a constant problem.
  25. Replies
    7
    Views
    288

    Re: Hard Drive on Lanier LD055

    Locate the controller, the PCB with the ethernet port, the hard drive will connected to the controller. If it's not mounted on the controller, it's somewhere on the back of the machine.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4