Search:

Type: Posts; User: blackcat4866

Page 1 of 20 1 2 3 4

Search: Search took 0.13 seconds.

  1. Replies
    16
    Views
    467

    Re: TaskAlfa 3551ci - "black toner empty"

    You won't have to repeat that one. When you have to think that hard on a fix, it sticks. =^..^=
  2. Replies
    4
    Views
    71

    Re: eStudio 3508a dual fax

    Most dual line faxes can Rx on both lines, but only Tx on one line. I'm fairly certain that this model is like all the others.

    I learned about this on a bizhub C360, in which the two tenants of a...
  3. Re: BH-C-280/360 several machines, same effect

    Personally I think that it's in your digital artwork. You may not see it on the paper but I guarantee that it's there, just not visible. Try blowing up your digital artwork to 1600% enlargement and...
  4. Replies
    1
    Views
    140

    How long of a paper roll can I load?

    It's on an HP Designjet T2600, but this question applies to any wide format device printing onto roll paper.

    This question was a dilemma for me, since the maximum roll length is only limited by...
  5. [Jamming] Re: Canon ir adv 8205 60gsm paper problem

    60gsm qualifies as "tracing paper" and unsuitable for duplexing or finishing operations

    If you want to replace something, replace the media with 75gsm or heavier. =^..^=
  6. Replies
    16
    Views
    467

    Re: TaskAlfa 3551ci - "black toner empty"

    Maybe similar ... I've had jams that would not clear for this reason. When I got to the right door it cleared ... even though there was no paper. =^..^=
  7. Re: Konica Minolta C3350 white spots and vertical lines in black/grey prints

    Maybe somebody here knows more about the manufacture of organic photoconductors ... but I suspect that it's a defect in the outer clear-coat on the drum. I've seen such things before. They usually do...
  8. Re: optics cleaning cloth + platen glass slippery product

    Same here ... I just call it washer solvent. The formula that I've come up with is:
    2 gal -10F washer solvent
    3 qts vinegar scented Windex
    1 qt Cleaning Vinegar

    Here in Michigan, it's important...
  9. Re: Konica Minolta C3350 white spots and vertical lines in black/grey prints

    Yes, it's normal for all drum blades to be primed with yellow toner, on all manufacturers, all models.

    The small defects you see are on the drum surface. The will not get worse, and they won't go...
  10. Replies
    16
    Views
    467

    Re: TaskAlfa 3551ci - "black toner empty"

    Your memory is correct.The AlphardII is not subject to that issue.

    Which toner is installed? TK-8307K or TK-8309K? They look very similar, but the TK-8309K will not be recognized in a Kyocera.
    If...
  11. Replies
    3
    Views
    117

    Re: e-studio 2550c churps like a bird

    I know where you're coming from. In high school I worked in a stamping plant, stamping out metal parts. I lost most of my upper range hearing by 1981.

    Like you, I rely on others to tell me if I...
  12. Replies
    6
    Views
    123

    Re: Greenville SC

    Welcome! =^..^=
  13. Replies
    39
    Views
    1,710

    Re: Venting...

    Hold on ... you mean snot isn't black? =^..^=
  14. Replies
    5
    Views
    183

    [Misc] Re: Dispose of used toner

    The most common thing I remember is the customer unplugging the waste sensor, since the wire hangs out in full view, just begging to be fiddled with. =^..^=
  15. Replies
    5
    Views
    183

    [Misc] Re: Dispose of used toner

    Wow! What an antique! Is this in a museum? =^..^=
  16. Re: 2540c Showing 0% Toner and Asking to Install New Toner but Toner Still Full

    Is it genuine Toshiba toner? =^..^=
  17. Replies
    2
    Views
    102

    Re: Jam 72-17 on BH808

    We've seen plenty of those finisher inlet mylars wear. There is a 90 degree fold in the edges that contact the paper, so when it wears through you've got a 3mm wide flap of mylar to catch the leading...
  18. Re: Folding limit - Taskalfa 6053Ci with BF-730

    You mean like writing new firmware for the machine, changing the way the basic machine functions?

    Maybe your classes have been a bit more in-depth than mine, but I've never been let in on machine...
  19. Replies
    12
    Views
    277

    Re: Toshiba e-Studio 255 - CB30 Error

    Check the edit. I did a little more reading. =^..^=
  20. Replies
    12
    Views
    277

    Re: Toshiba e-Studio 255 - CB30 Error

    If it was a jam, and the jam was EB50 ... yes the clutch might help.

    But it's an error, and CB30 indicates tray shift for tray #3. The simplest possibility is that the pusher for the left side of...
  21. Replies
    12
    Views
    396

    [Misc] Re: C3100P Issues

    With many of the Konica Minolta (Lexmark rebadges) we have found that something on the network can lock up the machine. There are a couple threads on this.

    I had 5 machines at a single location...
  22. Replies
    27
    Views
    931

    Re: 5005AC passwords

    Correct.
  23. Replies
    12
    Views
    285

    Re: Olivetti 6014

    Are you sure that's genuine Olivetti (Kyocera) toner? =^..^=
  24. Re: optics cleaning cloth + platen glass slippery product

    "Slippery" stopped being an issue 15 years ago, when original belts went by the wayside. Now that most machines slide read, it hasn't been an issue.
    =^..^=
  25. Replies
    12
    Views
    285

    Re: Olivetti 6014

    This looks a lot like a monochrome mono-component Kyocera. Did the developing unit come empty? Did you run the toner add function?
    =^..^=
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4