Search:

Type: Posts; User: KYO_OEM

Page 1 of 12 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    11
    Views
    490

    Re: ecosys p3150 pressure roller build up

    If you use custom 6, fixing temperature will increase about 36 degrees F.
    But at your system you don`t need it, increasing function would implemented in Service Mode!!
    See picture and follow the...
  2. Thread: Olivetti 6014

    by KYO_OEM
    Replies
    12
    Views
    285

    Re: Olivetti 6014

    HVT, i think.
    Sample looks like shortcut from HVT
  3. Thread: Olivetti 6014

    by KYO_OEM
    Replies
    12
    Views
    285

    Re: Olivetti 6014

    Please take a look for the transfer roller and/ or HVT PWB below.
    Looks like wrong voltages from the roller.
    Roller seems to decrease HV voltage from DK
    Circumference from transfer roller 58.0...
  4. Thread: Olivetti 6014

    by KYO_OEM
    Replies
    12
    Views
    285

    Re: Olivetti 6014

    In this case we must think about the laser at first.
    At the previous series we have had problems with the laser shutter, but this part wouldn`t mounted from factory anymore in the successor series....
  5. Thread: Olivetti 6014

    by KYO_OEM
    Replies
    12
    Views
    285

    Re: Olivetti 6014

    You are right Blackcat
    it`s KYO M3660idn with Olivetti Branding
    On "older" Polaris we have had problems with drive cluch for DVs, broken HVT, not working laser without C-Call...and so on
    System...
  6. Thread: Olivetti 6014

    by KYO_OEM
    Replies
    12
    Views
    285

    Re: Olivetti 6014

    laser shutter?
    Did you run printjob or else without main charger?
  7. [CQ] Re: Kyocera CS 3552ci leaving line/smudge on first copy

    Today i got phone call from fieldtech regarding maybe similar issue.
    See below explanation from KDC
    After switching from U100 i got positive feedback
    49049
  8. Replies
    9
    Views
    481

    [Misc] Re: Prescribe command

    Maybe this setting will solve your problem for the date stamp
    (At the moment we are moving the whole company and i can`t test it for you. No more systems available any more)
    Example from Userguide/...
  9. Replies
    9
    Views
    481

    [Misc] Re: Prescribe command

    i think you don`t need Prescribe command.
    Take a look to the usermanual and search for bates stamp.
    At TA2554ci you ll find it at System Menue/ Securtity settings/ System stamp
  10. [Misc] Re: Kyocera 2551 colors on copies and prints are not correctly aligned.

    If it`s coming from UTAX Italy, it`s from Enrico, the Technical Service Manager from UTAX Italy.
  11. [Misc] Re: Kyocera 2551 colors on copies and prints are not correctly aligned.

    @avio2/ greetings to Roberto
    I think it`s his translation from english to italian (In near future i will publish modified english version incl. Mebius and Sirius)
    I can`t read italian, but...
  12. Replies
    1
    Views
    136

    Re: Kyocera MC-3100 Main Charger Help

    We have > 300 units in the field with inbuilt MC-3100 and we don`t get problems >3% with this MC if orignal toner in use. (>3% means epidemic failure...)
    1 distributor asked for compensation payment...
  13. Replies
    11
    Views
    490

    Re: ecosys p3150 pressure roller build up

    i forgot important information:
    file name MUST BE "02autostart" without any extension.
    Here are 1 file for printing reports stored on mounted SD card.
    Remove the extension and try.
  14. Replies
    11
    Views
    490

    Re: ecosys p3150 pressure roller build up

    additional information from Kyocera for cleaning from pressroller as "kjg" had written.
    You don`t need own gray scale printout file, you can use original KYO file implemented in the enclosed PDF...
  15. Replies
    11
    Views
    490

    Re: ecosys p3150 pressure roller build up

    Sorry for late reply, but i found this post today...:mad:

    Settings for older 6th generation printers not longer needed.
    At this new range ( 6th+) it would implemented in service mode/ service...
  16. [Jamming] Re: TA 3501 Jams a Reg roller I believe 113 Jams Pic included

    At first check if you get J4102 by using cass. 2
    2nd step: check U031/ Regist switch
    3rd step: regist clutch controlling is coming from Feed PWB1 instead of feed pwb2 (changed by you), enter U032...
  17. Re: Part Number DP-760 Separation Roller Torque Limiter

    303LL07520 TORQUE LIMITER 400
    see Partslist Fig 4/ Paper Conveying Section 1/ Item #40
  18. Re: Are you still using the Default Admin password on every copier you install?

    @Billy,

    KDC is not sleeping.
    California IoT Security Act SB 327 Enclosed new security rule for next generation of Iris (TaskAlfa 2554ci, etc..)If "older" systems get this "modification", i don`t...
  19. Replies
    8
    Views
    444

    [CQ] Re: TaskAlfa 308ci Eats Drums.

    only CYK scratches, M o.k.?
    Broken Dv units:confused:.
    But 3 broken units at once, i don`t think so.
    Can we get sample from printout with scratches and maybe Service Status page 2 for further...
  20. Replies
    8
    Views
    444

    [CQ] Re: TaskAlfa 308ci Eats Drums.

    additional question:
    why all 4 drums would fitted at once?
  21. Replies
    2
    Views
    209

    Re: 3552ci jam 0105

    Check connectors from feed image pwb.
    Controlling from thermistors by this pwb.
  22. Replies
    2
    Views
    230

    [Misc] Re: kyocera 2200 scanner

    DP installed?
    I remember 1 similar case, long long time ago, but i don`t remember the reason.
    When i am right, by disconnected DP the scanner motor worked well.
    The responsable guy is still on...
  23. Re: Kyocera P6130cdn- "Cassette 1 Not Loaded" Message

    additional info
  24. Re: Kyocera P6130cdn- "Cassette 1 Not Loaded" Message

    Maybe switch size damaged
    remove the cassette and look for paper size switch on the left side.(fig. 13, electrical components 1/ #12/ 302HN44180)
    3 small switches present.
    Press and hold 1 or more...
  25. Replies
    12
    Views
    1,118

    [Error Code] Re: Kyocera ECOSYS P6230cdn/P6130cdn - Error 7002

    ++3

    But:

    we also have had rare similar cases with genuine toner.
    Reason:
    48721

    We asked KDC for correct sparenumbers and got the following:
    302NR02480/ Joint lever
Results 1 to 25 of 292
Page 1 of 12 1 2 3 4