I would check all the flag sensors. the duplex one in the pull down area when you take the tray out. The hidden one under the metal secrion in the front. Also the flags in the back door and fuser...
Type: Posts; User: spw
I would check all the flag sensors. the duplex one in the pull down area when you take the tray out. The hidden one under the metal secrion in the front. Also the flags in the back door and fuser...
Just realized this thread said 2019 instead of 2020 :rolleyes: oh well. hope it worked out
Definitely agree with CWP. The clutches go out on these and the whole series up to the MFP models as well. These are the exact symptoms for clutches,
Whats the coverage on the page? If heavy it could be adding toner like normal. But you might look into the Dev unit to start.
Just a heads up on if anyone is getting a continuous 'Low Toner' message or continuous 'Add Toner' message on a 3550. Found that the side gears on the toner drive on the whole unit that pulls out...
Our shop noticed this as well. We had several gears just break off of the pcu's around 12k. We did a test with 3515 drums ,where we drilled a hole in the plastic piece in the front.Seems to be the...
I would start with the simplest.try using a different web browser.
the charge roller that clips on top of the drum unit gets very dirty and make light prints when real dirty. taking the charge roller off and cleaning with windex and a soft cloth works very well.