Search:

Type: Posts; User: Brianneoe

Page 1 of 11 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    6
    Views
    183

    Re: SR-3240 capabilities

    Make sure the MAC has the Ricoh PPD loaded. If you are using the default Bonjour you will not have all the options. Add the PPD with the IP and the HP protocol. With the correct PPD loaded you will...
  2. Replies
    6
    Views
    326

    Re: RICOH Smart Integration Solutions

    There are 4 different levels..Anywhere from $10 usd a month to 70. When the customer signs up they are committing to one year the first year and then have the option going forward to cancel at any...
  3. Replies
    9
    Views
    531

    Re: scan to folder to macbook using SMB

    Telnet into the 3003 and run a "show" command..Make sure "SMB client auth" is not set to "0"
    If it is you will need to change it to a 1 or a 2..you can start with 2 but if you get a invalid command...
  4. Replies
    3
    Views
    324

    Re: 3501i and 3051ci print quality

    I had some luck adjusting U485 on the CI series in setting the color profile to another brand.
  5. Replies
    14
    Views
    1,278

    Re: New MAC 11.0.1 OS

    Jus a update on the battery problem. Turned out that another MAC user posted on the Apple forum that she also had this problem. Turned out that a old version of EFI was taking up 100% of memory even...
  6. Replies
    11
    Views
    539

    Re: Ricoh MP C2004ex scanning OCR question

    In some of my law firms large and small I use PPDM. It supports hot folders i.e. SMB shares and runs on windows 7-10 pro. At one firm we set up 4 windows VMs for each machine. Any problems can be...
  7. [Misc] Re: Copying data from one machine to another

    Make sure you have the newest version of the set up tool. Older versions won't show the 03 series.
  8. Replies
    10
    Views
    588

    Re: Ricoh 1075 quaility problem

    The drum shaft has a ground bearing on it that feeds into a board vis a vis a Electrode Plate If the bearing not making a good connection you will get the problem you are showing....
  9. Re: RICOH MP W6700 Streak, Line corner of page when printing more

    If the streak moves I would replace the main charge unit. If it is always at the same area check the upper guide plate before the fuser unit. The upper part of the guide plate may have collected...
  10. Re: Lanier LW 310 / aficio 240W error SC300-01 does this need a service mode reset?

    Dont do a NV clear with out backing up the NV in SP5824. 99 times out of 100 the problem is the end blocks are shorting out. The charge unit part # is AD00 4103
  11. Replies
    15
    Views
    690

    Re: Ricoh MP C8003 Fuser Heat Roller

    Have not had any rollers going bad (4460), The belts (4480) can rip up because of incorrect media use but they only cost about $150 USD

    The 3D parts manual is the way to go when your looking for...
  12. Replies
    23
    Views
    1,349

    [Misc] Re: Mac scan to ricoh MP 5004 or MP4054

    Make sure all the firmware is up to date. On some older MFPs I needed to telnet into the MFP and change the SMB Client auth to a 1 or 2.


    The command line is “smb client auth 1”
    Hit Enter and...
  13. Replies
    15
    Views
    5,245

    Re: Kyocera and WSD printing

    I started to disable IPP also on my Ricoh units for the same reasons you stated. The only problem so far is that it also breaks Airprint.
  14. Replies
    14
    Views
    675

    Re: IMC300 Bluetooth printing?

    mea culpa

    Sorry for the bad link..Major DUH on my part. Bluetooth printing does work but as stated above it does have limited range.
  15. Replies
    14
    Views
    1,278

    Re: New MAC 11.0.1 OS

    The reason for my post was to alert my fellow techs on the pitfalls of updating to the latest IOS if they are using a MAC laptop. In addition to the battery problem it will also kill the VM services....
  16. Replies
    22
    Views
    840

    Re: MPC4500 without fiery

    If 5985-002 is set to a 1 then your all set. It sounds like the Fiery controller is still set up on the machine. Check out these SP settings. You want it to be at the "DEFAULT VALUE"

    As described...
  17. Replies
    14
    Views
    1,278

    New MAC 11.0.1 OS

    I updated my OS 10.15.7 to the new 11.0.1 so I can run tests before I jump onto a customers unit running the same OS. A few weeks ago one of my techs came across this OS at a customers office and...
  18. Replies
    106
    Views
    9,540

    Re: Kyocera 7002i thick solid black line

    We are also starting to see it on the 7003i. My tech replaced the transfer belt unit last week..so far so good. I will post back if the problem reoccurs.
  19. Replies
    6
    Views
    587

    Re: Ricoh MP C6003 Factory Reset

    You can also try to log-in as "supervisor" no password. This will allow you to clear out or change the the admin password. 9 times out of 10 when the log-in password is changed they don't change the...
  20. Re: Ricoh C5100s: internal cooling fan is active

    "Internal cooling fan is active" alarm usually does not cause the machine not to work. A better screen shot is needed.
  21. Replies
    22
    Views
    840

    Re: MPC4500 without fiery

    There is 2 settings in 5985. 1 is for the NIC and 2 is for the USB..recheck that 5985-002 is set to a 1
  22. Replies
    14
    Views
    675

    Re: IMC300 Bluetooth printing?

    yes.. ...
  23. Re: Apple Mac High Sierra 10.13.1 - B&W standard

    As far as your second question..The quality is the same but the fonts is where the PS3 chip comes into play. If your customer is a heavy graphic user and not just a MAC user because its some type of...
  24. Replies
    35
    Views
    1,493

    Re: airprint c3003

    IPP turned off will also cause AirPrint not to work.
  25. Thread: Ricoh MP3353

    by Brianneoe
    Replies
    16
    Views
    979

    [CQ] Re: Ricoh MP3353

    This series always copied light right from the box. Had my Ricoh DSM look at one at a CPA place and we did everything under the sun to try to improve the quality. NG..Last thing we did was quite...
Results 1 to 25 of 269
Page 1 of 11 1 2 3 4