Search:

Type: Posts; User: femaster

Page 1 of 15 1 2 3 4

Search: Search took 0.09 seconds.

  1. Re: Legit questions wait weeks, yet SPAM gets through without the need for approval?

    Yes, every single one, post and poster.

    It just baffles me how it seems that legit posts are being filtered and wait forever, yet at least some (if not all) of the junk comes through without any...
  2. Legit questions wait weeks, yet SPAM gets through without the need for approval?

    There have been a few mentions in other threads by new members, legit techs with legit questions mind you, about the length of time it is taking to get their posts approved. This would seem to...
  3. Replies
    18
    Views
    749

    Re: 4e and 8 series drum unit

    Can you explain this a little better, like what was changed, etc? I've been laid off for a few months here, and within the last 2 weeks have gone back to work. Curious about what has changed as I...
  4. Re: What is the purpose of this black film on bizhub 227?

    Any adhesive on it anywhere? I don't do machine setup, so I've never personally seen what a 227 comes with, and I'd have to wait until the end of the weekend to see if any of the guys in the office...
  5. Re: What is the purpose of this black film on bizhub 227?

    It's not one of those "flaps" that hide the ADF hinge is it?
  6. Re: What is the purpose of this black film on bizhub 227?

    Now that you say that, it clicked and you are correct, that label I pictured would be white and not black like the one Bix showed. It was just a quick look on here at lunch time, so the brain was...
  7. Re: What is the purpose of this black film on bizhub 227?

    My only guess is: (Ignore, not it!)
    46078
    From Installation Guide...
  8. Replies
    20
    Views
    497

    Re: Konica Minolta c554e Print quality issues

    If you can find a unit with this attachment right here...
    46057
    That's my favorite. It has a long reach, can get into tight spaces, and is stiff yet flexible enough to get it just where you need it.
  9. Replies
    7
    Views
    214

    Re: Bizhub c552 color issue

    The funny thing is, the way he has the pages labeled, and how he describes it in the post, the first page is the "good" page, and the second is the "bad" page. In my opinion, there is no problem with...
  10. Replies
    20
    Views
    497

    Re: Konica Minolta c554e Print quality issues

    The ports and vent tubes are inside the copier, behind the Drum and Development units. Take a look at Page 3 of the PDF file attached to THIS POST (Click), and you will be able to see what they look...
  11. Replies
    2
    Views
    132

    Re: PC 408/7 Tray Cover Question...

    Don't have one available to look at at the moment, but the image should form a U shape around what would be a stack of paper. If you have one that looks like this:
    46056
    It would go the other way,...
  12. Replies
    7
    Views
    214

    Re: Bizhub c552 color issue

    I'll be honest with you, the second page looks better to me than the first. The flesh tones and the wood floor actually look the correct color. The first page looks way too "blue".
  13. Replies
    11
    Views
    327

    Re: Clean the ph unit without taking it apart

    More times then I even want to think about. There was one a few years back, which at this point I can't remember what it even was or what I was doing. The one thing I do remember is the "book" had me...
  14. Re: Konica Minolta C360 Moisture and Broken Guide

    Sounds like the paper or the environment is the problem. A new fuser won't fix the moisture problem, but might help with the jamming if your original doesn't have the film guides. Replacement fusers...
  15. [Misc] Re: Konica Minolta Bizhub 554e Nasty Grinding noise.

    If the chute was plugged, your problem is most likely resolved. About the only other thing I can think of that I have seen is if the tab on the shutter for the transfer belt cleaning unit is broken...
  16. Replies
    80
    Views
    3,010

    Re: Moderator desperately needed!

    Make a few more replies to other threads. I think once you reach 10 total posts you can start a thread without the need for approval.

    The only person that can do moderating hasn't been here in...
  17. Replies
    11
    Views
    332

    Re: Search Error Codes

    That's the one right there... Been making use of their Error Code area for a number of years now. Quick and easy look up, definitely beats sifting through the service manual. I know in the Konica...
  18. Replies
    15
    Views
    11,246

    Re: Bizhub 36 error 9401

    Can't tell you about the firmware, but every time I've had to deal with this, only way to clear was to replace the lamp.
  19. Replies
    4
    Views
    432

    [WTF] Re: Unemployment checks won't stop

    Same in Michigan, except you certify bi-weekly. They ask you specifically if you are claiming a given week, if you have started work again, etc. If you say that you have started working, they ask you...
  20. [Error Code] Re: Bizhub C554e message Fuser Extremely Hot with error 3102

    Yup, I'll third this thought. I can't tell you how many machines I've had to turn this message off on because the customer, despite being told exactly why it is there and what it means, still would...
  21. Replies
    13
    Views
    401

    Re: Missing developer bizhub 364e

    I don't really have anything helpful to add that will solve your problem, but I do have a story, not a very encouraging one, but...

    We had a similar business that did metal work, and the place was...
  22. Replies
    3
    Views
    188

    [Error Code] Re: E301 error code Bizhub C224e

    If you are getting TONS of these, it might just be old firmware, there was a firmware update a number of years ago that addressed the E301 error that was showing up very frequently, despite the...
  23. Replies
    12
    Views
    404

    Re: Bizhub C284e lines down prints

    Have done this hundreds of times. On this model you can do it without any problems.


    Your sample definitely looks like drum(s), but without a sample print from each individual drum, it's hard to...
  24. Replies
    80
    Views
    3,010

    Re: Moderator desperately needed!

    It's good to know that the TEST section doesn't increase post count. Learned a few new things today, thanks for the update!
  25. Replies
    7
    Views
    297

    Re: BHC554 c0002 code

    I've never experienced that code. Hopefully somebody didn't disconnect the LCT tray before powering off the copier. Can't really help with that code, but hopefully this will be a good start on a...
Results 1 to 25 of 354
Page 1 of 15 1 2 3 4